MAX992

Supply Voltage (V_CC to V_EE) ...................................................6V
IN_-, IN_+ to V_EE .......................................-0.3V to (V_CC + 0.3V)
OUT_ to V_EE
MAX987/MAX991/MAX995 .........................-0.3V to (V_CC + 0.3V)
MAX988/MAX992/MAX996.........................................-0.3V to 6V
OUT_ Short-Circuit Duration to V_EE or V_CC .......................10sec
Continuous Power Dissipation (T_A = +70°C)
5-Pin SOT23 (derate 7.10mW/°C above +70°C)............571mW
8-Pin SO (derate 5.88mW/°C above +70°C)..................471mW
8-Pin MAX (derate 4.10mW/°C above +70°C) .............330mW
14-Pin SO (derate 8.33 mW/°C above +70°C)...............667mW
Operating Temperature Range .........................-40°C to +85°C
Storage Temperature Range ...........................-65°C to +150°C
Lead Temperature (soldering, 10sec) ............................+300°C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail^® inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48A per comparator MAX992 while achieving a 120ns propagation delay.

The common-mode input voltage range of MAX992 extends 250mV beyond the supply rails. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals.

The output stage's unique design of MAX992 limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. The MAX987/MAX991/MAX995 have a push/pull output stage that sinks as well as sources current. Large internal output drivers allow railto- rail output swing with loads up to 8mA. The MAX988/MAX992/MAX996 have an open-drain output stage that can be pulled beyond V_CC to 6V (max) above V_EE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX987/MAX988 are available in tiny 5-pin SOT23 packages.