© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8225 is an instrumentation amplifier with a fixed gain f 5, which sets new standards of performance. The superior MRR of the AD8225 enables rejection of high frequency ommon-mode voltage (80 dB Min @ 10 kHz). As a ...
Vendor:Other Category:Other
The AD8224 is the first single-supply junction field effect transistor (JFET) input instrumentation amplifier available in the space-saving 16-lead, 4 mm * 4 mm LFCSP. It requires the same board area as a typical single ...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8223 is an integrated single-supply instrumentationamplifier that delivers rail-to-rail output swing on a singlesupply (3 V to 24 V). The AD8223 conforms to the 8-leadindustry standard pinout
Vendor:Other Category:Other
The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000.The AD8222 is the first dual-instrumentation amplifier in the sm...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC PREC INSTRUMENT AMP 8-SOICThe AD8221BR belongs to AD8221 family which is a gain programmable, high performance instrumentation amplifier that delivers the industry's highest CMRR over frequency. The CMRR of instrumentation amplifiers on the marke...
Vendor:Other Category:Other
The AD8221 is a gain programmable, high performance instrumentation amplifier that delivers the industry's highest CMRR over frequency in its class. The CMRR of instrumentation amplifiers on the
The AD8221 is a gain pro...
Vendor:Other Category:Other
The AD8220 is a gain programmable, high performance instru-mentation amplifier that draws a typical input bias current of 4pA and rejects high frequency common mode signals. The CMRR of instrumentation amplifiers on the ...
Vendor:Other Category:Other
The AD822 is a dual precision, low power FET input op ampthat can operate from a single supply of 3 V to 36 V or dual supplies of ±1.5 V to ±18 V. It has true single-supply capabilitywith ancapability with an input volta...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8216 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8215 is a high voltage, precision current shunt monitor. It features a set gain of 20 V/V, with a maximum ±0.3% gain error over the entire temperature range. The buffered output voltage
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8214 is a fast, high common-mode voltage threshold detector, which operates with a single supply of 5 V to 65 V. Internally the AD8214 features a fast comparator that is optimized for high
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8213 is a dual-channel, precision current sense amplifier. It features a set gain of 20 V/V, with a maximum ±0.5% gain error over the entire temperature range. The buffered output voltage
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8211 is a high voltage, precision current shunt amplifier. It features a set gain of 20 V/V, with a typical ±0.5% gain error over the entire temperature range. The buffered output voltage
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8210 is a single-supply, difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC OPAMP R-R FET-IN LP 8-SOICThe AD820ARZ is designed as one kind of single-supply, rail-to-rail, low power FET-input op amplifier that can operate from a single supply of 5.0 V to 36 V, or dual supplies of ±2.5 V to ±18 V. This device is available ...
Vendor:Other Category:Other
The AD8209 provides excellent ac and dc performance, minimizing errors in the application. The AD8209 is qualified per AEC-Q100 specifications. The amplifier offers enhanced input overvoltage and ESD protection, and incl...
Vendor:Other Category:Other
The AD8208 is qualified for automotive applications. The amplifier offers enhanced input overvoltage and ESD protection, and includes EMI filtering. Automotive applications demand robust, precision components for improve...
Vendor:Other Category:Other
The AD8207 is available in an 8-lead SOIC package. Excellent dc performance over temperature keeps errors in the measurement loop to a minimum. Offset drift is typically less than 500 nV/°C, and gain drift is typically b...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8206 is a single-supply difference amplifier for amplifying small differential voltages in the presence of large common-mode voltages. The operating input common-mode voltage range extends
Vendor:Other Category:Other
The AD8205 is a single-supply difference amplifier for amplifying mall differential voltages in the presence of large commonmode oltages. The operating input common-mode voltage ange extends from −2 V to +65 V. The...
Vendor:Other Category:Other
The AD8203 is a single-supply difference amplifier for amplify-ing and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range extends from −6 V to +...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8202 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage (CMV). The input CMV range
Mfg:AD Pack:SMD-8 Vendor:Other Category:Other
The AD8200 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage. The input CMV range extends from 2 V to +24 V at a typi...
Mfg:SG8 Pack:AD D/C:2005+ Vendor:Other Category:Other
The AD8200 is a single-supply difference amplifier for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage. The input CMV range extends from 2 V to +24 V at a typi...
Vendor:Other Category:Other
The AD820 is a precision, low power FET input op amp that can operate from a single supply of 5 V to 36 V, or dual supplies of ±2.5 V to ±18 V. It has true single-supply capability, with an input
Vendor:Other Category:Other
The AD8197B is an HDMI™/DVI switch featuring equalized TMDS® inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. The AD8197B offers individual control of the on/off state of the TMDS...
Vendor:Other Category:Other
The AD8197A is an HDMI™/DVI switch featuring equalized TMDS® inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power diss...
Vendor:Other Category:Other
The AD8196 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/o...
Vendor:Other Category:Other
The AD8193 is a low cost quad 2:1 TMDS® switch for high speed HDMI™/DVI video applications. Its primary function is to switch the high speed signals from one of two single-link (HDMI or DVI) sources to the sing...
Vendor:Other Category:Other
The AD8192 is a complete HDMI™/DVI link switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs ideal for systems with long cable runs. The TMDS outputs can be set to a high impedance state to reduce...
Vendor:Other Category:Other
The AD8191 is a HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/or...
Vendor:Other Category:Other
The AD8190 is an HDMI/DVI switch featuring equalized TMDS inputs and pre-emphasized TMDS outputs, ideal for systems with long cable runs. Outputs can be set to a high impedance state to reduce the power dissipation and/o...
Vendor:Other Category:Other
The AD8188 (G = 1) and AD8189 (G = 2) are high speed, single-supply, triple 2-to-1 multiplexers. They offer −3 dB small signal bandwidth of 350 MHz and −3 dB large signal bandwidth of 300 MHz, along with a sl...
Vendor:Other Category:Other
The AD8188 (G = 1) and AD8189 (G = 2) are high speed, single-supply, triple 2-to-1 multiplexers. They offer −3 dB small signal bandwidth of 350 MHz and −3 dB large signal bandwidth of 300 MHz, along with a sl...
Vendor:Other Category:Other
The AD8186 (G = +1) and AD8187 (G = +2) are high speed,single-supply, triple 2-to-1 multip lexers. They offer 3 dB large signal bandw idth of over 480 MHz along with a slew rate in excess of1500 V/µs. With better t...
Mfg:TOSHIBA Pack:SOP D/C:500 Vendor:Other Category:Other
The AD8183 (G = +1) and AD8185 (G = +2) are high speed triple 2:1 multiplexers. They offer 3 dB signal bandwidth up to 380 MHz, along with slew rate of 1000 V/ms. With better than90 dB of channel-to-channel crosstalk and...
Mfg:TOSHIBA Pack:SOP D/C:100 Vendor:Other Category:Other
The AD8184 is a high speed 4-to-1 multiplexer. It offers 3 dB signal bandwidth of 700 MHz along with a slew rate of 750 V/s. With 95 dB of crosstalk and 115 dB isolation, it is useful in many high speed applications....
Vendor:Other Category:Other
The AD8183 (G = +1) and AD8185 (G = +2) are high speed triple 2:1 multiplexers. They offer 3 dB signal bandwidth up to 380 MHz, along with slew rate of 1000 V/ms. With better than90 dB of channel-to-channel crosstalk and...
Vendor:Other Category:Other
The AD8180 (single) and AD8182 (dual) are high speed 2-to-1 multiplexers. They offer 3 dB signal bandwidth greater than 750 MHz along with slew rate of 750 V/ms. With better than 80 dB of crosstalk and isolation, they ar...
Mfg:TOSHIBA Pack:SOP D/C:301 Vendor:Other Category:Other
The AD8180 (single) and AD8182 (dual) are high speed 2-to-1 multiplexers. They offer 3 dB signal bandwidth greater than 750 MHz along with slew rate of 750 V/ms. With better than 80 dB of crosstalk and isolation, they ar...
Vendor:Other Category:Other
The AD818 is a low cost, video op amp optimized for use in video applications which require gains equal to or greater than+2 or (R)C1. The AD818 low differential gain and phase errors single supply functionality, low pow...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8177 is a high speed, triple 16 * 5 video crosspoint switch matrix. It supports 1600 * 1200 RGB displays @ 85 Hz refresh rate by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With −88 dB of crosst...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8176 is a high speed, triple 16 * 9 video crosspoint switch matrix. It supports 1600 * 1200 RGB displays @ 85 Hz refresh rate, by offering a 475 MHz bandwidth and a slew rate of 1800 V/s. With −68 dB of cross...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8175 is a high speed, triple 16 * 9 video crosspoint switch matrix. It supports 1600 * 1200 RGB displays @ 85 Hz refresh rate, by offering a 500 MHz bandwidth and a slew rate of 1800 V/s. With −88 dB of cross...
Mfg:TOSHIBA Pack:SOP D/C:300 Vendor:Other Category:Other
The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of deli...
Vendor:Other Category:Other
The AD8170(2:1) and AD8174(4:1) are very high speed buffered multiplexers. These multiplexers offer an internal current feedback output amplifier whose gain can be programmed via external resistors and is capable of deli...
Vendor:Other Category:Other
The AD817 is a low cost, low power, single/dual supply, high speed op amp which is ideally suited for a broad spectrum of signal conditioning and data acquisition applications. This breakthrough product also features hig...
Mfg:AD Pack:ZIP Vendor:Other Category:Other
The AD816 consists of two high current drive and two low noise amplifiers. These can be configured differentially for driv- ing low impedance loads and receiving signals over twisted pair cable or could be used independe...
Mfg:AD Pack:ZIP D/C:200 Vendor:Other Category:Other
The AD816 consists of two high current drive and two low noise amplifiers. These can be configured differentially for driving low impedance loads and receiving signals over twisted pair cable or could be used independent...
D/C:09+ Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DIFF DVR HI-OUTPUT 24-SOICThe AD815 consists of two high speed amplifiers capable of supplying a minimum of 500 mA. They are typically configured as a differential driver enabling an output signal of 40 V p-p on 15 V supplies. This can be increa...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC MUX/DEMUX QUAD BUFF 100TQFPThe AD8159ASVZ is a type of asynchronous, protocol agnostic, quad-lane 2:1 switch with a total of 12 differential PECL/CML-compatible inputs and 12 differential CML outputs. The operation of this product is optimized for...
Vendor:Other Category:Other
The AD8159 is an asynchronous, protocol agnostic, quad-lane 2:1 switch with a total of 12 differential PECL/CML-compatible inputs and 12 differential CML outputs. The operation of this product is optimized for NRZ signal...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8158 is an asynchronous, protocol-agnostic, quad-lane 2:1 switch with a total of 12 differential CML inputs and 12 differential CML outputs. The signal path supports NRZ signaling with data
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8153 is an asynchronous, protocol agnostic, single-lane 2:1 switch with three differential PECL/CML-compatible inputs and three differential CML outputs. The AD8159, another member of the XstreamTM line of products...
Vendor:Other Category:Other
AD8152 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (34 * 34) on very little power, typically 2.0 W. Additionally, it operates at data rates up to ...
Mfg:ADI D/C:09 Vendor:Other Category:Other
AD81511 is a member of the Xstream line of products, offering a breakthrough in digital switching and a large switch array (33 x 17) on very little power -- typically 1.5 W. It
Mfg:ADI D/C:09 Vendor:Other Category:Other
AD81501 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (33 x 17) on very little power, typically less than
Vendor:Other Category:Other
The AD815 consists of two high speed amplifiers capable of supplying a minimum of 500 mA. They are typically configured as a differential driver enabling an output signal of 40 V p-p on ±15 V supplies. This can be increa...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8146/AD8147/AD8148 are high speed triple, differential or single-ended input to differential output drivers. The AD8146 and AD8147 have a fixed gain of 2, and the AD8148 has a fixed gain of 4.
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8146/AD8147/AD8148 are high speed triple, differential or single-ended input to differential output drivers. The AD8146 and AD8147 have a fixed gain of 2, and the AD8148 has a fixed gain of 4.
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8146/AD8147/AD8148 are high speed triple, differential or single-ended input to differential output drivers. The AD8146 and AD8147 have a fixed gain of 2, and the AD8148 has a fixed gain of 4.
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8145 is a triple, low cost, differential-to-single-ended receiver specifically designed for receiving red-green-blue (RGB) video signals over twisted pair cable or differential printed
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8143 is a triple, low cost, differential-to-single-ended receiver specifically designed for receiving red-green-blue (RGB) signals over twisted pair cable. It can also be used for receiving
Vendor:Other Category:Other
The AD8139 is an ultralow noise, high performance differential amplifier with rail-to-rail output. With its low noise, high SFDR, and wide bandwidth, it is an ideal choice for driving ADCs with resolutions to 18 bits. Th...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DIFF ADC DVR 8-SOICThe AD8138ARZ is designed as one kind of low distortion differential ADC driver that can operate from a single supply of 5.0 V to 36 V, or dual supplies of ±2.5 V to ±18 V. This device is available in two performance gra...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DIFF ADC DVR LOW DISTOR 8MSOPThe AD8138ARMZ is one member of the AD8138 series.The AD8138 is a major advancement over op amps for differential signal processing. The AD8138 can be used as a single-ended-to-differential amplifier or as a differential...
Vendor:Other Category:Other
AD8138 is a major advancement over op amps for differential signal processing. The AD8138 can be used as a single-ended-to-differential amplifier or as a differential-to-differential ampli-fier. The AD8138 is as easy to ...
Vendor:Other Category:Other
The AD8137 is a low cost differential driver with a rail-to-rail output that is ideal for driving 12-bit ADCs in systems that are sensitive to power and cost. The AD8137 is easy to apply, and its internal common-mode fee...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8134 is a major advancement beyond using discrete op amps for driving differential RGB signals over twisted pair cable. The AD8134 is a triple, low cost differential or single-ended input to
Vendor:Other Category:Other
The AD8133 is a major advancement beyond using discrete op amps for driving differential RGB signals over twisted pair cable. The AD8133 is a triple, low cost differential or single-ended input to differential output dri...
Mfg:AD Pack:MSOP D/C:04+ Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DIFF AMP 350MHZ HS 8-MSOP The AD8132 is a low-cost differential or single-ended input to differential output amplifier with resistor-settable gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for dr...
Vendor:Other Category:Other
The AD8132 is a low-cost differential or single-ended input to differential output amplifier with resistor-settable gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving ...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DRIVER DIFF HI SPEED 8SOICThe AD8131ARZ-REEL7 is one member of the AD8131 series.The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2.The AD8131 is a major advance...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC DIFF DVR HS 8-MSOP T/RThe AD8131ARM-REEL is one of the AD8131 series.The AD8131ARM-REEL is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2.The AD8131ARM-REEL is a...
Vendor:Other Category:Other
The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines ...
Vendor:Other Category:Other
The AD8129 and AD8130 are designed as receivers for the transmission of high-speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and fo...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD813 is a low power, single supply triple video amplifier. Each of the three current feedback amplifiers has 50 mA of output current, and is optimized for driving one back-terminated video load (150 W). The AD813 fe...
Vendor:Other Category:Other
The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the <aThe AD8129 and AD8130 are designed as receivers for the transmission of high-speed sig...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8128 is a high speed, differential receiver/equalizer that compensates for the transmission losses of unshielded twisted pair (UTP) CAT-5 cables. Various frequency dependent gain stages are
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8123 is a triple, high speed, differential receiver and equalizer that compensates for the transmission losses of UTP and coaxial cables up to 300 meters in length. Various gain stages are
Vendor:Other Category:Other
The AD812 is a low power, single supply, dual video amplifier. Each of the amplifiers have 50 mA of output current and are optimized for driving one back-terminated video load (150 W) each. Each amplifier is a current fe...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8117/AD8118 are high speed, 32 * 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/s for high resolution computer graphics (RGB) signal switching. With
Vendor:Other Category:Other
The AD8116* belongs to AD8116.Is is a kind of a high speed 16*16 video crosspoint switch matrix.It offers a -3 dB signal bandwidth greater than 200 MHz and channel switch times of 60 ns with 0.1% settling.It can be used ...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8116 is a high speed 16 *16 video crosspoint switch matrix. It offers a 3 dB signal bandwidth greater than 200 MHz and channel switch times of 60 ns with 0.1% settling. With 70 dB of crosstalk and 105 dB of isolati...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8114/AD8115 are high speed 16 *16 video crosspoint switch matrices. They offer a 3 dB signal bandwidth greate than 200 MHz and channel switch times of less than 50 ns with 1% settling. With -70 dB of crosstalk...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8114/AD8115 are high speed 16 *16 video crosspoint switch matrices. They offer a 3 dB signal bandwidth greate than 200 MHz and channel switch times of less than 50 ns with 1% settling. With -70 dB of crosstalk...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC VIDEO CROSSPOINT SW 100-LQFPThe AD8113JSTZ is one member of the AD8113 series.The AD8113 is a fully buffered crosspoint switch matrix that operates on ±12 V for audio applications and ±5 V for video applications. AD8113JSTZ offers a 3 dB signal ban...
Vendor:Other Category:Other
The AD8113 is a fully buffered crosspoint switch matrix that operates on ±12 V for audio applications and ±5 V for video applications. It offers a 3 dB signal bandwidth greater than 60 MHz and channel switch times of les...
Vendor:Other Category:Other
The AD811 is a wideband current-feedback operational amplifier,optimized for broadcast quality video systems. The 3 dB bandwidth of 120 MHz at a gain of +2 and differential gain and phase of 0.01% and 0.01° (RL = 150) ma...
Vendor:Other Category:Other
The AD8108 and AD8109 are high speed 8* 8 video crosspoint switch matrices. They offer a 3 dB signal bandwidth greater than 250 MHz and channel switch times of less than 25 ns with 1% settling. With 83 dB of crosstalk an...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8108 and AD8109 are high speed 8 * 8 video crosspoint switch matrices. They offer a 3 dB signal bandwidth greater than 250 MHz and channel switch times of less than 25 ns with 1% settling. With 83 dB of crosstalk a...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD810 is a composite and HDTV compatible, current feedback, video operational amplifier, ideal for use in systems such as multimedia, digital tape recorders and video cameras. The 0.1 dB flatness specification at ban...
Vendor:GE Sensing Category:Sensors, Sensor Evaluation Kits
SENSOR GAS FOR CO/NO2 EXHAUST
Vendor:Other Category:Other
The AD8099 is an ultralow noise (0.95 nV/Hz) and distortion (92 dBc @10 MHz) voltage feedback op amp, the combination of which make it ideal for 16- and 18-bit systems. The AD8099 features a new, highly linear, low noise...
Vendor:Other Category:Other
The AD8091 (single) and AD8092 (dual) are low-cost, voltage feedback, high-speed amplifiers designed to operate on +3 V, +5 V,or ±5 V supplies. They have true single-supply capability with an input voltage range extendin...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC AMP R-R SINGLE HS 8-SOICThe AD8091ARZ is designed as one kind of low cost, high speed rail-to-rail amplifier device that can be used in wide range of applications such as (1)Coaxial cable drivers; (2)Active filters; (3)Video switchers; (4)Profe...
Vendor:Other Category:Other
The AD8091 (single) and AD8092 (dual) are low-cost, voltage feedback, high-speed amplifiers designed to operate on +3 V, +5 V,or ±5 V supplies. They have true single-supply capability with an input voltage range extendin...
Vendor:Other Category:Other
The AD809 provides a 155.52 MHz ECL/PECL output clock from either a 19.44 MHz or a 9.72 MHz TTL/CMOS/ECL/PECL reference frequency. The AD809 functionality supports a distributed timing architecture, allowing a backplane ...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC FIBER OPTIC RCVR 16-SOICThe AD808-622BRRL provides the receiver functions of data quantization,signal level detect,clock recovery and data retiming for 622 Mbps NRZ data.The device,together with a PIN diode/preamplifier combination,can be used ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.