© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Analog Devices Inc. Category:ICs, Modules, Accessories for RF, RFID
IC QUADRATURE MOD 250MHZ 16TSSOPThe AD8345 is a silicon RFIC quadrature modulator, designed for use from 250 MHz to 1000 MHz. AD8346's excellent phase accuracy and amplitude balance enable the high performance direct modulation of an IF carrier. The AD...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8344 is a high performance, broadband active mixer. It is well suited for demanding receive-channel applications that require wide bandwidth on all ports and very low intermodulation distortion and noise figu...
Vendor:Other Category:Other
The AD8343 is a high-performance broadband active mixer. Having wide bandwidth on all ports and very low intermodulation distortion, the AD8343 is well suited for demanding transmit orreceive channel applications.
The A...
Vendor:Other Category:Other
The AD8342 is a high performance, broadband active mixer. It is well suited for demanding receive-channel applications that require wide bandwidth on all ports and very low inter-modulation distortion and noise figure.Th...
Vendor:Other Category:Other
The AD8341 vector modulator performs arbitrary amplitude and phase modulation of an RF signal. Since the RF signal path is linear, the original modulation is preserved. This part can be used as a general-purpose RF modul...
Vendor:Other Category:Other
The AD8340 vector modulator performs arbitrary amplitude and phase modulation of an RF signal. Since the RF signal path is linear, the original modulation is preserved. This part can be used as a general-purpose RF modul...
Vendor:Other Category:Other
The AD834 is a monolithic laser-trimmed four-quadrant analog multiplier intended for use in high frequency applications, having a transconductance bandwidth (RL = 50 ) in excess of 500 MHz from either of the differential...
Vendor:Other Category:Other
The AD8339 is a Quad I/Q demodulator intended to be driven by a low noise preamplifier with differential outputs; it is optimized for the LNA in the AD8332/4/5 family of VGAs. The part consists of four identical I/Q demo...
Vendor:Other Category:Other
The AD8337 is a low noise, single-ended, linear-in-dB, general-purpose variable gain amplifier (VGA) usable at frequencies from dc to 100 MHz; the ?3 dB bandwidth is 280 MHz. Excellent bandwidth
The AD8337 is a low nois...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8336 is a low noise, single-ended, linear-in-dB, general-purpose variable gain amplifier, usable over a large range of supply voltages. It features an uncommitted preamplifier (preamp) with a
Vendor:Other Category:Other
The AD8335 is a quad variable gain amplifier (VGA) with low noise preamplifier intended for cost and power sensitive applications. Each channel features a gain range 48 dB, fully differential signal paths, active input p...
Vendor:Other Category:Other
The AD8334 is a quad version of the AD8331 Variable Gain Amplifier. Except for mechanical details, all electrical specifications are the same. Mechanical details unique to the AD8334 are listed below. For a complete desc...
Vendor:Other Category:Other
The AD8333 is a dual phase shifter and I/Q demodulator that enables coherent summing and phase alignment of multiple analog data channels. It is the first solid-state device suitable for beamformer circuits, such as thos...
Vendor:Other Category:Other
The AD8332 is an ultralow noise, dual channel linear-in-dB variable gain amplifier (VGA). Although optimized for ultrasound systems, it may be used for a low noise variable gain control in any application of frequencies ...
Vendor:Other Category:Other
The AD8331/AD8332 are single- and dual-channel ultralow noise, linear-in-dB, variable gain amplifiers. Although optimized for ultrasound systems, they are usable as low noise variable gain elements at frequencies up to 1...
Vendor:Other Category:Other
Features of the AD8330ARQZ-REEL7 are:(1)fully differential signal path and also used with single-sided signals;(2)inputs from 0.3 mV to 1 V rms, rail-to-rail outputs;(3)differential RIN = 1 k; ROUT (each output) 75 ;(4)a...
Vendor:Other Category:Other
The AD83301 is a wideband variable gain amplifier for applications requiring a fully differential signal path, low noise, well-defined gain, and moderately low distortion, from dc to 150The AD8330 is a wideband variable-...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC LINE DRIVE CABLE 5V 20QSOP TRThe AD8328ARQ-REEL is one member of the AD8328 family which is designed as the low cost amplifier that can be used in (1)DOCSIS and EuroDOCSIS cable modems; (2)CATV set-top boxes; (3)CATV telephony modems; (4)coaxial and...
Vendor:Other Category:Other
The AD8328 is a low cost amplifier designed for coaxial line driving. The features and specifications make the AD8328 ideally suited for MCNS-DOCSIS and Euro-DOCSIS applications. The gain of the AD8328 is digitally contr...
Vendor:Other Category:Other
The AD8327 is a low-cost, digitally controlled, variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. An 8-bit serial word de...
Vendor:Other Category:Other
The AD8326 is a high-output power, digitally controlled, vari- able gain amplifier optimized for coaxial line driving applications such as data and telephony cable modems that are designed to the MCNS-DOCSIS upstream sta...
Pack:S&D Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC LN DVR CATV FINE-STEP 28TSSOPThe AD8325 is a low-cost, digitally controlled, variable gain ampli-fier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. An 8-bit serial word d...
Vendor:Other Category:Other
The AD8325 is a low-cost, digitally controlled, variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. An 8-bit serial word de...
Vendor:Other Category:Other
The AD83241 is a low cost amplifier designed for coaxial line driving. The features and specifications make the AD8324 ideally suited for DOCSIS 2.0 and EuroDOCSIS applications. The gain
The AD83241 is a low cost amplif...
Vendor:Other Category:Other
The AD8323 is a low-cost, digitally controlled, variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstreamstandard. An 8-bit serial word det...
Mfg:2 Pack:AD Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC LN DVR CATV COARS-STP 28TSSOPThe AD8322 is a low-cost, digitally controlled variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. An 8-bit serial word det...
Vendor:Other Category:Other
The AD8322 is a low-cost, digitally controlled variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. An 8-bit serial word det...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC LINE DVR CATV 20-SOICThe AD8321AR is a low cost digitally charged variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the DOCSIS* (upstream) standard. An 8-bit serial word determ...
Vendor:Other Category:Other
The AD8321 is a low cost digitally controlled variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the DOCSIS* (upstream) standard. An 8-bit serial word determ...
Vendor:Analog Devices Inc. Category:ICs, Integrated Circuits, Semiconductors
IC LINE DVR VARIABLE GAIN 20SOICThe AD8320ARP is one member of the AD8320 series.The AD8320 is a digitally controlled variable gain amplifier optimized for coaxial line driving applications. An 8-bit serial word determines the desired output gain over...
Vendor:Other Category:Other
The AD8320 is a digitally controlled variable gain amplifier optimized for coaxial line driving applications. An 8-bit serial word determines the desired output gain over a 36 dB range (256 gain levels). The AD8320 provi...
Vendor:Analog Devices Inc Category:RF and RFID
IC MIXER DWNCONV LOW DIST 20PLCCThe AD831AP is designed as a low distortion, wide dynamic range, monolithic mixer for use in such applications as RF to IF down conversion in HF and VHF receivers, the second mixer in DMR base stations, direct-to-baseban...
Vendor:Other Category:Other
The AD8319 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output. It employs the progressive compression technique over a cascaded amplifier...
Vendor:Other Category:Other
The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage. It employs the progressive compression technique over a cascaded a...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8317 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output. It employs the progressive compression technique over
Vendor:Other Category:Other
The AD8316 is a complete, low cost subsystem for the precise control of dual RF power amplifiers (PAs) operating in the frequency range 0.1 GHz to 2.5 GHz and over a typical dynamic range of 50 dB. The device is a dua...
Vendor:Other Category:Other
The AD8315 is a complete low cost subsystem for the precise control of RF power amplifiers operating in the frequency range 0.1 GHz2.5 GHz and over a typical dynamic range of 50 dB. It is intended for use in cellular han...
Vendor:Analog Devices Inc Category:RF and RFID
IC RF DETECTOR/CTRLR 45DB 8-MSOPThe AD8314ARM is one member of the AD8314 series.The AD8314 is a complete low-cost subsystem for the measurement and control of RF signals in the frequency range 0.1 GHz2.5 GHz, with a typical dynamic range of 45 dB,inte...
Vendor:Other Category:Other
The AD8314 is a complete low-cost subsystem for the measurement and control of RF signals in the frequency range 0.1 GHz2.5 GHz, with a typical dynamic range of 45 dB, intended for use in a wide variety of cellular hands...
Vendor:Analog Devices Inc Category:RF and RFID
IC LOGARTIHMIC AMP 70DB 8-MSOPThe AD8313ARMZ is designed as a complete multistage demodulating logarithmic amplifier that can accurately convert an RF signal at its differ-ential input to an equivalent decibel-scaled value at its dc output. It mainta...
Vendor:Analog Devices Inc Category:RF and RFID
IC LOGARTIHMIC AMP 70DB 8-MSOPThe AD8313ARM is one member of the AD8313 series.The AD8313 is a complete multistage demodulating logarithmic amplifier, capable of accurately converting an RF signal at its differential input to an equivalent decibel-sc...
Vendor:Other Category:Other
The AD8313 is an RF logarithmic detector and controller, with response extending from 0.1 to 2.5 GHz. The device is capable of accurately converting a modulated RF signal at its differential input to
The AD8313 is a com...
Vendor:Other Category:Other
The AD8312 is a complete, low cost subsystem for the measurement of RF signals in the frequency range of 50 MHz to 3.5 GHz. It has a typical dynamic range of 45 dB and is intended for use in a wide variety of cellular ha...
Vendor:Other Category:Other
The AD8311 is a complete low cost subsystem for the precise control of RF power amplifiers operating in the frequency range 0.1 GHz to 2.5 GHz and over a typical dynamic range of 50 dB. It is intended for use in cellular...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC AMP LOGARITHMIC 8MSOPFeatures of the AD8310ARMZ-REEL7 are:(1)multistage demodulating logarithmic amplifier;(2)voltage output, rise time <15 ns;(3)high current capacity: 25 mA into grounded RL;(4)95 dB dynamic range: −91 dBV to +4 dB...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC LOGARITHMIC AMP 95DB 8-MSOPThe AD8310ARMZ is designed as a complete, dc-440 MHz demodulating logarithmic amplifier (log amp) with a very fast voltage mode output, capable of driving up to 25 mA into a grounded load in under 15 ns. It uses the prog...
Vendor:Other Category:Other
The AD8310 is a complete, dc-440 MHz demodulating logarithmic amplifier (log amp) with a very fast voltage-mode output capable of driving up to 25 mA into a grounded load in under 15 ns. It uses the progressive compressi...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD831 is a low distortion, wide dynamic range, monolithic mixer for use in such applications as RF to IF down conversion in HF and VHF receivers, the second mixer in DMR base stations, direct-to-baseband conversion, ...
Vendor:Other Category:Other
The AD8309 is a complete IF limiting amplifier, providing both an accurate logarithmic (decibel) measure of the input signal (the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful f...
Vendor:Analog Devices Inc (VA) Category:Integrated Circuits (ICs)
IC AMP LOGARITHMIC 8-SOICThe AD8307ARZ-RL7 is designed as one kind of low cost DC-500 MHz, 92 dB logarithmic amplifier that can be used in wide range of applications such as (1)Conversion of signal level to decibel form; (2)Transmitter antenna p...
Vendor:Other Category:Other
The AD8307 is the first logarithmic amplifier in an 8-lead (SO-8) package. It is a complete 500 MHz monolithic demodulating logarithmic amplifier based on the progressive compression (successive detection) technique, pro...
Vendor:Other Category:Other
The AD8306 is a complete IF limiting amplifier, providing bothan accurate logarithmic (decibel) measure of the input signal(the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful fro...
Vendor:Other Category:Other
The AD8306 is a complete IF limiting amplifier, providing bothan accurate logarithmic (decibel) measure of the input signal(the RSSI function) over a dynamic range of 100 dB, and a programmable limiter output, useful fro...
Vendor:Other Category:Other
The AD8305 is an inexpensive microminiature logarithmic converter optimized for determining optical power in fiber optic systems. It uses an advanced implementation of a classic translinear (junction based) technique to ...
Vendor:Other Category:Other
The AD8304 is a monolithic logarithmic detector optimized for the measurement of low frequency signal power in fiber optic systems. It uses an advanced translinear technique to provide an exceptionally large dynamic rang...
Vendor:Other Category:Other
The AD8303 is a complete (includes internal reference) dual, 12-bit, voltage output digital-to-analog converter designed to operate from a single +3 volt supply. Built using a CBCMOS process, this monolithic DAC offers t...
Mfg:AD Pack:SOP D/C:08+ Vendor:Analog Devices Inc Category:RF and RFID
IC DETECTOR RF/IF 14-TSSOP The AD8302 is an innovative, fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7...
Vendor:Other Category:Other
Monolithic Silicon Bipolar, Measurement of Amplitude / Phase
The AD8302 is a fully integrated RF IC for measuring amplitude and the phase between two independent input signals. The device
The AD8302 is a fully integra...
Vendor:Other Category:Other
The AD8300 is a complete 12-bit, voltage-output digital-toanalog converter designed to operate from a single +3 volt supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease-of-use in ...
Mfg:AD Pack:1781 Vendor:Other Category:Other
The AD830 is a wideband, differencing amplifier designed for use at video frequencies but also useful in many other applications. It accurately amplifies a fully differential signal at the input and produces an output vo...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8293G80/AD8293G160 are small, low cost, precisioninstrumentation amplifiers that have low noise and rail-to-railoutputs. They are available in
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8293G80/AD8293G160 are small, low cost, precisioninstrumentation amplifiers that have low noise and rail-to-railoutputs. They are available in two
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8290 contains both an adjustable current source to drive a sensor and a difference amplifier to amplify the signal voltage. The amplifier is set for a fixed gain of 50. The AD8290 is an
Vendor:Other Category:Other
The AD829 is a low noise (1.7 nV/Hz), high speed op amp with custom compensation that provides the user with gains from ±1 to ±20 while maintaining a bandwidth greater than 50 MHz. The AD829's 0.04° differential phase an...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC VIDEO OPAMP DUAL LP 8-SOICThe AD828ARZ is designed as one kind of dual, low power video op amplifier that is fully specified for operation with a single +5 V power supply and with dual supplies from ±5 V to ±15 V. This device is also optimized fo...
Vendor:Other Category:Other
The AD828 is a low cost, dual video op amp optimized for use in video applications which require gains of +2 or greater and high ouput drive capability, such as cable driving. Due to its low
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC OPAMP DUAL HS LP 16-SOIC T/RThe AD827JR-16-REEL7 is one member of the AD827 family which is designed as the high speed, low power dual op amp that achieves a 300 V/ms slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW when operat...
Vendor:Other Category:Other
The AD8278 and AD8279 operate on single supplies (2.0 V to 36 V)or dual supplies (±2 V to ±18 V). The maximum quiescent supply current is 200 A, which is ideal for battery-operated and portable systems. For unity-gain di...
Vendor:Other Category:Other
The AD8276/AD8277 are unity-gain stable. While they are optimized for use as difference amplifiers, they can also be connected in high precision, single-ended configurations with G = -1, +1, +2. The AD8276/AD8277 provide...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8275 is a G=0.2 difference amplifier that can be used totranslate +/-10V signals to a +4V level. It solves the problemtypically encountered in industrial and instrumentation where+/-10V
Vendor:Other Category:Other
The AD8274 is a difference amplifier that delivers excellent ac and dc performance. Built on Analog Devices, Inc., proprietary iPolar® process and laser-trimmed resistors, AD8274 achieves a breakthrough in distortion...
Vendor:Other Category:Other
The AD8273 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier (G = ½ or 2), inverting amp...
Vendor:Other Category:Other
The AD8271 operates on both single and dual supplies and requires only a 2.6 mA maximum supply current. It is specified over the industrial temperature range of -40°C to +85°C and is fully RoHcompliant. For a dual channe...
Vendor:Other Category:Other
The AD8270 is a low distortion, dual-channel amplifier with internal gain setting resistors. With no external components, it can be configured as a high performance difference amplifier with gains of
Vendor:Other Category:Other
The AD827 is a dual version of Analog Devices' industrystandard AD847 op amp. Like the AD847, it provides high speed, low power performance at low cost. The AD827 achieves a 300 V/ms slew rate and 50 MHz unity-gain bandw...
Vendor:Other Category:Other
The AD8264 is a 4-channel, linear-in-dB, general-purpose variable gain amplifier (VGA)with a preamplifier (preamp), and a flexible differential output buffer. The gain range of the VGA section is 24 dB. The -3 dB bandwid...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8260 includes a high current driver, usable as a transmitter, and a low noise, digitally programmable variable gain amplifier (DGA), useable as a receiver, combined in a 5 mm × 5 mm, 32-lead
Vendor:Other Category:Other
The AD826 is a dual, high speed voltage feedback op amp. It is ideal for use in applications which require unity gain stability and high output drive capability, such as buffering and cabledriving. The 50 MHz bandwidth a...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC AMP JFET HS GEN-PURP 8-SOICThe AD825AR-REEL is one of the AD825 series.The AD825AR-REEL is a superbly optimized operational amplifier for high speed, low cost and dc parameters, making it ideally suited for a broad range of signal conditioning and...
Vendor:Other Category:Other
The AD825 is a superbly optimized operational amplifier for high speed, low cost and dc parameters, making it ideally suited for a broad range of signal conditioning and data acquisition applications. The ac performance,...
Vendor:Other Category:Other
This is a stereo fully digital audio amplifier with output power which can deliver up to 216W to 4 load with 12V supply . Using I2C digital control interface, AD8256A provides sound processing functions including Volume,...
Vendor:Other Category:Other
This is a stereo digital audio amplifier AD82551A with high power efficiency, which leads to longer battery life, less heat sink requirement, smaller board size and lower system cost. AD82551A can detect headphone connec...
Vendor:Other Category:Other
This is a stereo digital audio amplifier with high power efficiency, which leads to longer battery life, less heat sink requirement, smaller board size and lower system cost. AD82550A can detect headphone connection and ...
Vendor:Other Category:Other
The AD8253 is an instrumentation amplifier with digitally programmable gains that has gigaohm (G) input impedance, low output noise, and low distortion, making it suitable for interfacing with sensors and driving high sa...
Vendor:Other Category:Other
The AD8251 is an instrumentation amplifier with digitally programmable gains that has G input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate a...
Vendor:Other Category:Other
The AD8250 is an instrumentation amplifier with digitally programmable gains that has G input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate a...
Vendor:Other Category:Other
The AD825 is a superbly optimized operational amplifier for high speed, low cost and dc parameters, making it ideally suited for a broad range of signal conditioning and data acquisition applications. The ac performance,...
Vendor:Other Category:Other
The AD824 is a quad, FET input, single supply amplifier, fea- turing rail-to-rail outputs. The combination of FET inputs and rail-to-rail outputs makes the AD824 useful in a wide variety of low voltage applications where...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC OPAMP FET DUAL R-R 8-SOICThe AD823ARZ is designed as a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of 3.0 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input ...
Vendor:Other Category:Other
The AD8236 is available in an 8-lead MSOP and is specified over the industrial temperature range of -40°C to +125°C. The AD8236 is the lowest power instrumentation amplifier in the industry. It has rail-to-rail outputs a...
Vendor:Other Category:Other
The AD8235 draws a maximum quiescent current of 40 A. Its low input bias current of 50 pA and high CMRR of 110 dB (G = 100)offer tremendous value for its size and low power. It is specified over the extended industrial t...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8231 is a low drift, rail to rail, instrumentation amplifier with software programmable gains of 1, 2, 4, 8, 16, 32, 64 or 128. The gains are programmed via digital logic or pin strapping.The AD8231 is ideal for ap...
Vendor:Other Category:Other
The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer app...
Vendor:Other Category:Other
The AD823 is a dual precision, 16 MHz, JFET input op amp that can operate from a single supply of +3.0 V to +36 V, or dual supplies of ±1.5 V to ±18 V. It has true single supply capability with an input voltage range ext...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC OPAMP FET R-R LP 8-SOICThe AD822ARZ is one member of the AD822 series.The AD822 is a dual precision,low power FET input op amp that can operate from a single supply of 3.0 V to 36 V or dual supplies of ±1.5 V to ±18 V.It has true single-supply...
Vendor:Analog Devices Inc Category:Integrated Circuits (ICs)
IC OPAMP FET R-R LP 8-SOICThe AD822AR is designed as one kind of dual precision, low power FET input op amp that can operate from a single supply of +3.0 V to 36 V, or dual supplies of ±1.5 V to ±18 V.It is available in four performance grades. T...
Mfg:ADI D/C:09 Vendor:Other Category:Other
The AD8228 is a high performance instrumentation amplifier with very high gain accuracy. Because all gain setting resistors are internal and laser trimmed, gain accuracy and gain drift are better than
Vendor:Other Category:Other
The AD8227 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative s...
Vendor:Other Category:Other
The AD8226 is a low cost instrumentation amplifier that requires only one external resistor to set any gain between 1 and 1000. The AD8226 is designed to work with a very wide range of voltages. It can operate on supplie...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.