AD8250

`Small package: 10-lead MSOP Programmable gains: 1, 2, 5, 10 Digital or pin-programmable gain setting
`Wide supply: ±5 V to ±15 V
`Excellent dc performance
High CMRR 98 dB (min), G = 10
Low gain drift: 10 ppm/°C (max)
Low offset drift: 1.7 V/°C (max), G = 10
`Excellent ac performance
Fast settling time: 615 ns to 0.001% (max)
High slew rate: 20 V/s (min)
Low distortion: −110 dB THD at 1 kHz
High CMRR over frequency: 80 dB to 50 kHz (min)
Low noise: 18 nV/Hz, G = 10 (max)
Low power: 4 mA

The AD8250 is an instrumentation amplifier with digitally programmable gains that has G input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidth of 10 MHz, low THD of −110 dB and fast settling time of 615 ns to 0.001%. Offset drift and gain drift are guaranteed to 1.7 V/°C and 10 ppm/°C, respectively for G = 10. In addition to its wide input common voltage range, it boasts a high common-mode rejection of 80 dB at G = 1 from dc to 50 kHz. The combination of precision dc performance coupled with high speed capabilities make the AD8250 an excellent candidate for data acquisition. Furthermore, this monolithic solution simplifies design and manufacturing, and boosts performance of instrumentation by maintaining a tight match of internal resistors and amplifiers.

The AD8250 user interface consists of a parallel port that allows users to set the gain in one of two different ways (see Figure 1 for the functional block diagram). A 2-bit word sent via a bus can be latched using theWR input. An alternative is to use transparent gain mode where the state of logic levels at the gain port determines the gain.