IC AMP DIFF LDIST 60MA 8SOIC
AD8131ARZ-REEL7: IC AMP DIFF LDIST 60MA 8SOIC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Output Power : | 362 mW | ||
Manufacturer: | Analog Devices Inc | Amplifier Type: | Differential | ||
Type: | - | Number of Circuits: | 1 | ||
Max Output Power x Channels @ Load: | - | Output Type: | Differential | ||
Slew Rate: | 2000 V/µs | Voltage - Supply: | - | ||
Features: | - | Gain Bandwidth Product: | - | ||
-3db Bandwidth: | 400MHz | Current - Input Bias: | 500nA | ||
Voltage - Input Offset: | 1500µV | Current - Supply: | 11.5mA | ||
Current - Output / Channel: | 60mA | Voltage - Supply, Single/Dual (±): | 2.8 V ~ 11 V, ±1.4 V ~ 5.5 V | ||
Operating Temperature: | -40°C ~ 125°C | Mounting Type: | Surface Mount | ||
Package / Case: | 8-SOIC (0.154", 3.90mm Width) | Supplier Device Package: | 8-SO |
The AD8131ARZ-REEL7 is one member of the AD8131 series.The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2.The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs.The AD8131 has a unique internal feedback feature that provides output gain and phase matching that are balanced to -60 dB at 10 MHz, reducing radiated EMI and suppressing harmonics.
Features of the AD8131ARZ-REEL7 are:(1)high speed:400 MHz, .3 dB full power bandwidth,2000 V/s slew rate; (2)fixed gain of 2 with no external components; (3)internal common-mode feedback to improve gain and phase balance: -60 dB @ 10 MHz; (4)separate input to set the common-mode output voltage; (5)low distortion: 68 dB SFDR @ 5 MHz 200 load; (6)power supply range +2.7 V to ±5 V.The AD8131 is a differential driver for the transmission of high-speed signals over low-cost twisted pair or coax cables. The AD8131 can be used for either analog or digital video signals or for other high-speed data transmission. The AD8131 driver is capable of driving either Cat3 or Cat5 twisted pair or coax with minimal line attenuation. The AD8131 has considerable cost and performance improvements over discrete line driver solutions.
The absolute maximum ratings of the AD8131ARZ-REEL7 can be summarized as:(1)storage temperature range:-65 to 150;(2)operating temperature range:-40 to 125;(3)supply voltage:±5.5V;(4)VOCM:±VS;(5)internal power dissipation:250mW.Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only, functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection.Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Technical/Catalog Information | AD8131ARZ-REEL7 |
Vendor | Analog Devices Inc |
Category | Integrated Circuits (ICs) |
Packaging | Tape & Reel (TR) |
Amplifier Type | Differential |
Number of Circuits | 1 - Single |
Package / Case | 8-SOIC (3.9mm Width) |
Slew Rate | 2000 V/s |
Gain Bandwidth Product | - |
Current - Supply | 11.5mA |
Current - Output / Channel | 60mA |
Voltage - Supply, Single/Dual (±) | 2.8 V ~ 11 V, ±:1.4 V ~ 5.5 V |
Output Type | Differential |
-3db Bandwidth | 400MHz |
Current - Input Bias | 500nA |
Operating Temperature | -40°C ~ 125°C |
Voltage - Input Offset | 1500V |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | AD8131ARZ REEL7 AD8131ARZREEL7 |