© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
A compact LED assembly ORE9801X giving good alignment with small PCB footprint. The Black Nylon 6 zero flammability moulding houses a 3mm LED and is available in a wide range of colours and current options.
Vendor:Other Category:Other
Vendor:Other Category:Other
An assembly of ORE9701X containing one or two 3mm LEDS. The housings provide convenient and rigid mountings for a double row of LEDs on 0.2 inch vertical pitch.
Vendor:Other Category:Other
A miniture LED assembly of ORE9601X giving good alignment with small PCB footprint. The Black Nylon 6 zero flammability moulding houses a 3mm LED and is available in a wide range of colours and current options.
Vendor:Other Category:Other
Vendor:Other Category:Other
The ORE 5003 is a single 5mm LED assembly for mounting at 90 deg. The housing is moulded in black Nylon 6 with zero flammability rating. The housing will accept standard 2 leaded and 3 lead tri-colour LEDs with an inline...
Vendor:Other Category:Other
An assembly containing one or two 3mm LEDS. The housings of ORD9702XY provide convenient and rigid mountings for a double row of LEDs on 0.2 inch vertical pitch.
Vendor:Other Category:Other
The ORD9402 is a family of devices using a black Nylon 6 Vo UL rated housing for 1 or 2 LED's at right angles to the PCB. A unique interlocking feature enables packages to be stacked up to 32 Way long with ready insertio...
Vendor:Other Category:Other
The ORD221 is a small single-contact reed switch designed for general control of medium-level loads less than 100 V. The contacts are sealed within the glass tube with inert gas to maintain contact reliability.
Vendor:Other Category:Other
The ORD211 is a small single-contact reed switch designed for general control of low-level loads less than 24 V. The contacts are sealed within the glass tube with inert gas to maintain contact reliability.
Vendor:Other Category:Other
Vendor:Other Category:Other
The ORD 9202 SERIES is a family of display devices using a Black Nylon 6 UL-94Vo rated housing to mount one or two 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1" centres and the package is available wi...
Pack:SMD Vendor:Other Category:Other
The ORCA Series 2 series of SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design w...
Vendor:Other Category:Other
This OR4E10 describes the pins found on the Series 4 FPGAs. Any pin not described in this table is a user- programmableI/O. During configuration, the user-programmable I/Os are 3-stated with an internal pull-up resistor ...
Vendor:Other Category:Other
The following sections OR3TP12 describe the operation of the embedded PCI bus core interface.
Mfg:ORCA Pack:BGA D/C:05+ Vendor:Other Category:Other
The ATM UTOPIA Slave Core OR3T55-7 from Modelware† implements, in modular VHDL, the ATM forum's UTOPIA Level 1 and Level 2 specifications.
The core interfaces of OR3T55-7 to the application (e.g., ATM physical or...
Vendor:Other Category:Other
The OR3LP26B PIC addresses the demand for everincreasing system clock speeds. Each PIC contains four programmable inputs/outputs (PIOs) and routing resources. On the input side, each PIO contains a fastcapture latch that...
Vendor:Other Category:Other
The OR3C55 FPGAs are a new generation of SRAM-based FPGAs built on the successful OR2C/ TxxA FPGA Series from Lucent Technologies Microelectronics Group, with enhancements and innovations geared toward today's high-speed...
Vendor:Other Category:Other
Mfg:ORCA Pack:QFP D/C:0705+ Vendor:Other Category:Other
The ATM UTOPIA Slave Core OR2T15A-6 from Modelware† implements, in modular VHDL, the ATM forum's UTOPIA Level 1 and Level 2 specifications.
The core interfaces of OR2T15A-6 to the application (e.g., ATM physical ...
Vendor:Other Category:Other
The OR2T04A-2BA100SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conservin...
Mfg:ORCA Pack:QFP D/C:N/A Vendor:Other Category:Other
The OR2C12A SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conserving the ...
Mfg:ORCA D/C:1650
Vendor:Other Category:Other
The OR2C10A SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conserving the ...
Vendor:Other Category:Other
The OR2C08A SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conserving the ...
Mfg:ORCA Pack:N/A D/C:09+ Vendor:Other Category:Other
The OR2C06A SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conserving the ...
Vendor:Other Category:Other
`The FPGA OR2C04A's functionality is determined by internal configuration RAM. The FPGA's internal initialization/configuration circuitry loads the configuration data at powerup or under system control. The RAM OR2C04A...
Vendor:Other Category:Other
Flashtubes OR 9902 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathode...
Vendor:Other Category:Other
Flashtubes OR 9901 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathode...
Vendor:Other Category:Other
FlashtubesOR 8902 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathode...
Mfg:PHILIPS Pack:QFP D/C:96 Vendor:Other Category:Other
The Digital Servo Integrated Circuit Silent (DSICS) IC OQ8868 provides all servo functions except the spindle motor control in two-stage Compact Disc (CD) systems. It offers a high degree of integration, combined with th...
Mfg:SOP-20 Pack:PHI D/C:04+ Vendor:Other Category:Other
The OQ8844 or Digital Servo Driver 2 (DSD2) consists of 1-bit class-D power drivers, which are specially designed for digital servo applications. Three such amplifiers OQ8844 are integrated in one chip, to drive the focu...
Mfg:PHILIPS Pack:LQFP D/C:00+ Vendor:Other Category:Other
The OQ2545HP is a driver IC intended to be used with a directly modulated laser diode or with an Electro Absorption Modulator (EAM) in SDH/SONET 2.5 Gbits/s optical transmission systems.The IC OQ2545HP features different...
Vendor:Other Category:Other
The OQ2545BHP is a driver IC intended to be used with a directly modulated laser diode or with an Electro Absorption Modulator (EAM) in SDH/SONET 2.5 Gbits/s optical transmission systems.The IC OQ2545BHP features differe...
Vendor:Other Category:Other
The OQ2541U is a data and clock recovery IC intended for use in Synchronous Digital Hierarchy (SDH) and Synchronous Optical Network (SONET) systems.The circuit OQ2541U recovers data and extracts the clock signal from an ...
D/C:07+ Vendor:Other Category:Other
The OQ2541HP is a data and clock recovery IC intended for use in Synchronous Digital Hierarchy (SDH) and Synchronous Optical Network (SONET) systems.The circuit OQ2541HP recovers data and extracts the clock signal from a...
Vendor:Other Category:Other
The OQ2538U is a limiting amplifier IC intended for use as the main amplifier in 2.5 Gbits/s Non-Return to Zero (NRZ) transmission systems (SDH/SONET).Comprised of four amplifier stages with a total gain of 48.5 dB, OQ25...
Mfg:N/A Pack:QFP D/C:08+ Vendor:Other Category:Other
The OQ2538HP is a limiting amplifier IC intended for use as the main amplifier in 2.5 Gbits/s Non-Return to Zero (NRZ) transmission systems (SDH/SONET).Comprised of four amplifier stages with a total gain of 48.5 dB, OQ2...
Mfg:200 Pack:PHILIPS Vendor:Other Category:Other
The OQ2536HP is a 32-channel demultiplexer intended for use in STM16/OC48 applications. It demultiplexes a single 2.5 Gbits/s input channel to 32 ´ 78 Mbits/s output channels. The data and clock outputs of OQ2536HP...
Mfg:PHI Pack:TQFP D/C:99+ Vendor:Other Category:Other
The OQ2535HP is a 32-channel multiplexer intended for use in STM16/OC48 applications. It combines data from a total of 32 ´ 78 Mbits/s input channels onto a single 2.5 Gbits/s output channel. It features 3.3 V TTL ...
Vendor:TT Electronics/Optek Technology Category:Optoelectronics
LED VCSEL CONV LENS 850NM T-1
Vendor:Other Category:Other
·The OPV215 is a high performance 850nm VCSEL pack- aged for high speed communication links. OPV215 com- bines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of...
Vendor:Other Category:Other
·The OPV215 is a high performance 850nm VCSEL pack- aged for high speed communication links. OPV215 com- bines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of...
Vendor:Other Category:Other
·The OPV214 is a high performance 850nm VCSEL pack-aged for high speed communication links. OPV214 combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of op...
Vendor:Other Category:Other
The OPV214AT is high performance 850nm VCSEL packaged for high speed communication link.OPV214AT combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of optica...
Vendor:Other Category:Other
·The OPV214 is a high performance 850nm VCSEL pack-aged for high speed communication links. OPV214 combines all the performance advantages of a VCSEL with the addition of a power monitor diode for precise control of op...
Vendor:Other Category:Other
· The OPV202 is a high performance 850nm VCSEL pack- aged for sensing applications. This product!s combina- tion of features including high speed, high output power and concentric beam makes OPV202 an ideal transmitter...
Vendor:Other Category:Other
The OPU872CP is a capsule sensor which includes both a light emitting diode and a phototransistor in the package with connector.The transmission type photointerruptor is implemented by combining the OPU872CP with a recta...
Vendor:Other Category:Other
The OPU864CP/OPU865CP are sensors that are suited to paper detection. For superior dustproof packing and easy mounting, a phototransistor is sealed (encapsuled) into a package with connectors.The OPU864CP/OPU865CP perfor...
Vendor:Other Category:Other
The OPU864CP/OPU865CP are sensors that are suited to paper detection. For superior dustproof packing and easy mounting, a phototransistor is sealed (encapsuled) into a package with connectors.The OPU864CP/OPU865CP perfor...
Vendor:Other Category:Other
The T36CP2/T36CP3/T54LCP/OPU860CP/OPU862 are sensors that are most suited to paper detection. For superior dustproof packaging and easy mounting, a phototransistor can be sealed (encapsulated) into a package with connect...
Vendor:Other Category:Other
The T36CP2/T36CP3/T54LCP/OPU860CP/OPU862 are sensors that are most suited to paper detection. For superior dustproof packaging and easy mounting, a phototransistor can be sealed (encapsulated) into a package with connect...
Vendor:Other Category:Other
The OLD122CP3, OLD222CP, OPU850CP, and OPU852CP are sensors that are most suited to paper detection. For superior dustproof packaging and easy mounting, a phototransistor can be sealed (encapsulated) into a package with ...
Vendor:Other Category:Other
The OLD122CP3, OLD222CP, OPU850CP, and OPU852CP are sensors that are most suited to paper detection. For superior dustproof packaging and easy mounting, a phototransistor can be sealed (encapsulated) into a package with ...
Vendor:Other Category:Other
The OPU817 is a reflector-type photo interrupter that contains a high-output infrared light emitting diode and a high-sensitivity phototransistor
Vendor:Other Category:Other
The OPU813 and OPU813R are reflector-type photo interrupters that have been developed for reading 0.17mm bar codes.
Vendor:Other Category:Other
The OPU813 and OPU813R are reflector-type photo interrupters that have been developed for reading 0.17mm bar codes.
Vendor:Other Category:Other
OPT-TM Optical terminators, Optical devices
Vendor:Other Category:Other
Vendor:Other Category:Other
The Opt49LP response is a modified elliptic filter; Opt49LP has a flat passband with ripple of less than ±0.1dB up to the cutoff frequency, and a stopband of -77dB starting at 1.5 times cutoff (figures 3 and 4). The pha...
Mfg:BB Pack:CAN8 D/C:05+ Vendor:Other Category:Other
The OPT301 is an opto-electronic integrated circuit containing a photodiode and transimpedance amplifier on a single dielectrically isolated chip. The transimpedance amplifier consists of a precision FETinput op amp and ...
Mfg:BB Vendor:Other Category:Other
The OPT211 is a monolithic photodiode with on-chip FET-input transpedance amplifier, that provides wide bandwidth at very high gains. Uncommitted input and feedback nodes allow a variety of feedback options for maximum v...
Vendor:Other Category:Other
The OPT210 is a photodetector consisting of a high performance silicon photodiode and precision FETinput transimpedance amplifier integrated on a single monolithic chip. Output is an analog voltage proportional to light ...
Vendor:Other Category:Other
The OPT202 is an opto-electronic integrated circuit containing a photodiode and transimpedance amplifier on a single dielectrically isolated chip. The transimpedance amplifier consists of a precision FETinput op amp and ...
Vendor:Other Category:Other
The OPT-155AxH1A series from DELTA are 1x9 optical transceiver modules designed expressly for high-speed communication applications that require rates of up to 155Mbps. They are all compliant with the SONET/SDH standards...
Vendor:Other Category:Other
The OPT101T is designed as one kind of monolithic photodiode and single-supply transimpedance amplifier that can be used in (1)medical instrumentation; (2)laboratory instrumentation; (3)position and proximity sensors; (4...
Mfg:BB Pack:DIP8 Vendor:Other Category:Other
The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. Output voltage increases linearly with light intensity. The amplifier is designed for single or dual power supply operation, making it ideal fo...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SNSR OPTO TRANS TH MOD PHOTOTRANThe OPS695 consists of a gallium arsenide infrared emitting diode (0P145) and an NPN silicon phototransistor (0P555) mounted in matched lateral side-looking plastic packages.Matched pairs are desirable where the applicat...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SNSR OPTO TRANS TH MOD PHOTOTRANThe OPS690 consists of a gallium arsenide infrared emitting diode (0P140) and an NPN silicon phototransistor (0P550) mounted in matched lateral side-looking plastic packages.Matched pairs are desirable where the applicat...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SNSR OPTO TRANS TH T-1 PHOTOTRANThe OPS665 consists of a gallium arsenide infrared emitting diode (0P165) and an NPN silicon phototransistor (0P505) mounted in matched plastic T-1 packages. Matched pairs are desirable where the application is unique an...
Vendor:Other Category:Other
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSR OPTO TRANS 5.08MM REFL SMDThe OPR5005 is a SMD Reflective Sensor.This miniature sensor combines a silicon phototransistor with a GaAIAs LED in a high temperature opaque polyimide chip carrier. It is designed to sense the motion or proximity of di...
Mfg:OPTEK Pack:BGA D/C:0622+ Vendor:Other Category:Other
The OPR5001B, OPR5002B and OPR5003B are hybrid sensor arrays consisting of one, two or three channels of the Optek OPC8032 Differential Optical Comparator, ("DOC") IC.Specifically designed for encoder applications, the o...
Vendor:Other Category:Other
The OPR5001B, OPR5002B and OPR5003B are hybrid sensor arrays consisting of one, two or three channels of the Optek OPC8032 Differential Optical Comparator, ("DOC") IC.Specifically designed for encoder applications, the o...
Vendor:Other Category:Other
The OPR5001B, OPR5002B and OPR5003B are hybrid sensor arrays consisting of one, two or three channels of the Optek OPC8032 Differential Optical Comparator, ("DOC") IC.Specifically designed for encoder applications, the o...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC HERMETIC TO-18The OPL810 contains a monolithic integrated circuit which incorporates a photodiode, a linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip.The devices feature TTL/LSTTL compatible logic ...
Vendor:Other Category:Other
The OPL800B is a high reliability optoelectronic microcircuit that incorporates a photodiode, linear amplifier, and Schmitt trigger on a single silicon chip. The device features TTL/STTL compatible logic level output whi...
Mfg:OPTEK Pack:DIP4 Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
DIODE DUAL PHOTOLOGIC 16V PLSTICThe OPL583 contains a monolithic integrated circuit which incorporates two independent photodiodes, linear amplifiers, Schmitt trigger circuits, and output transistors served by a common voltage regulator. The outputs ar...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC SIDE LOOKINGThe OPL560 contains a monolithic integrated circuit which incorporates a photodiode, a linear amplifier, voltage regulator, and a Schmitt trigger on a single silicon chip.The devices feature TTL/LSTTL compatible logic le...
Vendor:Other Category:Other
The OPL535, OPL535-OC, OPL536, OPL536-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Mfg:OPTEK Pack:DIP3 D/C:2005 Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC CMOS SIDE LOOKThe OPL535, OPL535-OC, OPL536, OPL536-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Vendor:Other Category:Other
The OPL535, OPL535-OC, OPL536, OPL536-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC CMOS SIDE LOOKThe OPL535, OPL535-OC, OPL536, OPL536-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Vendor:Other Category:Other
The OPL530, OPL530-OC, OPL531, OPL531-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Mfg:OPTEK Pack:DIP3 D/C:2005 Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC CMOS SIDE LOOKThe OPL530, OPL530-OC, OPL531, OPL531-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Vendor:Other Category:Other
The OPL530, OPL530-OC, OPL531, OPL531-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Mfg:OPTEK Pack:DIP3 D/C:2005 Vendor:TT Electronics/Optek Technology Category:Sensors, Transducers
SENSOR PHOTOLOGIC CMOS SIDE LOOKThe OPL530, OPL530-OC, OPL531, OPL531-OC contain a monolithic integrated circuit which incorporates a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor on a single silicon chip.The OP...
Vendor:Other Category:Other
OPL4-ML is a wave table synthesizer LSI that integrates OPL3, general MIDI processor and wave table ROM into one chip, and complies with GM system level 1.It makes a low cost system with high quality tone when it is used...
Vendor:Other Category:Other
The OPI6000 is optically coupled isolators each consisting of a gallium arsenide infrared emitting diode and en NPN silicon photoderlington mounted in a standard plastic six pin duel-in-lina package.The information given...
Vendor:Other Category:Other
The OPI3153 is optically coupled isolators each consisting of a gallium arsenide infrared emitting diode and en NPN silicon photoderlington mounted in a standard plastic six pin duel-in-lina package.The information of OP...
Vendor:Other Category:Other
The OPI3152 is optically coupled isolators each consisting of a gallium arsenide infrared emitting diode and en NPN silicon photoderlington mounted in a standard plastic six pin duel-in-lina package.The information of OP...
Vendor:Other Category:Other
The OPI3151 is optically coupled isolator each consisting of a gallium arsenide infrared emitting diode end an NPN silicon photodarlington mounted in a standard plastic six pin dual-in-line package.The information of OPI...
Vendor:Other Category:Other
The OPI3020 consists of a gallium arsenide or gallium aluminum arsenide infrared emitting diode and a monolithic integrated circuit containing a photo-diode and a 6idirectional switch, mounted in e standard plastic six p...
Vendor:Other Category:Other
The OPI3009 consists of a gallium arsenide or gallium aluminum arsenide infrared emitting diode and a monolithic integrated circuit containing a photo-diode end a bidirectional switch, mounted in a standard plastic six p...
Vendor:Other Category:Other
The OPI3000P Optically Coupled Isolator consist of a Infrared emitter coupled to a silicon photo transistor. The OPI3000P series is designed for applications requiring high voltage isolation between input & output.
Vendor:Other Category:Other
The OPI2000M High Speed Optically Coupled Isolator consists of a High Speed Infrared emitter coupled to a silicon photo I.C. The OPI2000M unit is designed for applications requiring high voltage isolation between input ...
Vendor:Other Category:Other
The OPI2000 High Speed Optically Coupled Isolator consists of a High Speed Infrared emitter coupled to a silicon photo I.C. The OPI2000 unit is designed for applications requiring high voltage isolation between input &am...
Vendor:TT Electronics/Optek Technology Category:Isolators
ISOLATOR HS OPTICALLY COUPLEDThe OPI155 contains a high speed monolithic photo-IC comprised of a photodiode and DC amplifier driving an open collector output Schottky transistor.OPI155 is optically coupled by means of an internal light pipe and moun...
Vendor:TT Electronics/Optek Technology Category:Isolators
OPTOISOLATOR TRANSISTOR-OUT 50KVThe OPI150TX is optically coupled isolators, consisting of a gallium aluminum arsenide infrared light emitting diode component (OP235TX or OP235TXV) by means of a light pipe and sealed in a high dielectric plastic housin...
Vendor:Other Category:Other
Vendor:TT Electronics/Optek Technology Category:Isolators
OPTO ISOLATOR HS .25V 5-PINThe OP11266 consists of a GaAIAs LED coupled with a unique integrated circuit detector. Photons are collected in the detector by a photodiode and amplified by a high gain linear amplifier that drives a Schottky clamped o...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.