OR2C10A

Features:

` High-performance, cost-effective, low-power 0.35 m CMOS technology (OR2CxxA), 0.3 m CMOS technology (OR2TxxA), and 0.25 m CMOS technologyOR2TxxB), (four-input look-up table (LUT) delay less than 1.0 ns with -8 speed grade)
` High density (up to 43,200 usable, logic-only gates; or 99,400 gates including RAM)
`Up to 480 user I/Os (OR2TxxA and OR2TxxB I/Os are 5 V tolerant to allow interconnection to both 3.3 V and 5 V devices, selectable on a per-pin basis)
` Four 16-bit look-up tables and four latches/flip-flops per PFU, nibble-oriented for implementing 4-, 8-, 16-, and/or
32-bit (or wider) bus structures
` Eight 3-state buffers per PFU for on-chip bus structures
` Fast, on-chip user SRAM has features to simplify RAM design and increase RAM speed:
   - Asynchronous single port: 64 bits/PFU
   - Synchronous single port: 64 bits/PFU
   - Synchronous dual port: 32 bits/PFU
` Improved ability to combine PFUs to create larger RAM structures using write-port enable and 3-state buffers
` Fast, dense multipliers can be created with the multiplier mode (4 x 1 multiplier/PFU):
   - 8 x 8 multiplier requires only 16 PFUs
   - 30% increase in speed
` Flip-flop/latch options to allow programmable priority of synchronous set/reset vs. clock enable
`Enhanced cascadable nibble-wide data path capabilities for adders, subtractors, counters, multipliers,and omparators including internal fast-carry operation 
`Innovative, abundant, and hierarchical nibbleoriented routing resources that allow automatic use of internal gates for all device densities without sacrificing performance
` Upward bit stream compatible with the ORCA ATT2Cxx/ATT2Txx series of devices
` Pinout-compatible with new ORCA Series 3 FPGAs
` TTL or CMOS input levels programmable per pin for the OR2CxxA (5 V) devices
` Individually programmable drive capability: 12 mA sink/6 mA source or 6 mA sink/3 mA source
` Built-in boundary scan (IEEE*1149.1 JTAG) and
3-state all I/O pins, (TS_ALL) testability functions
` Multiple configuration options, including simple, low pincount serial ROMs, and peripheral or JTAG modes for insystem
programming (ISP)
` Full PCI bus compliance for all devices
` Supported by industry-standard CAE tools for design entry, synthesis, and simulation with ORCA Foundry Development System support (for back-end implementation)
` New, added features (OR2TxxB) have:
   - More I/O per package than the OR2TxxA family
   - No dedicated 5 V supply (VDD5)
   - Faster configuration speed (40 MHz)
   - Pin selectable I/O clamping diodes provide 5V or 3.3V PCI compliance and 5V tolerance
   - Full PCI bus compliance in both 5V and 3.3V PCI systems


Specifications

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of this data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

The ORCA Series FPGAs include circuitry designed to protect the chips from damaging substrate injection currents and prevent accumulations of static charge. Nevertheless, conventional precautions should be observed during storage,handling, and use to avoid exposure to excessive electrical stress.

Parameter	Symbol	Min	Max	Unit
Storage Temperature	Tstg	-65	150
Storage Temperature Tstg 65 150 °C Supply Voltage with Respect to Ground	VDD	-0.5	7.0	V
VDD5 Supply Voltage with Respect to Ground (OR2TxxA)	VDD5	VDD	7.0	V
Input Signal with Respect to Ground OR2TxxA only	-	-0.5	VDD + 0.3 VDD5 + 0.3	V
Signal Applied to High-impedance Output OR2TxxA only	-	-0.5	VDD + 0.3 VDD5 + 0.3	V
Maximum Soldering Temperature	-	-	260

Description

The OR2C10A SRAM-based FPGAs are an enhanced version of the ATT2C/2T architecture. The latest ORCA series includes patented architectural enhancements that make functions faster and easier to design while conserving the use of PLCs and routing resources.

The OR2C10A devices can be used as drop-in replacements for the ATT2Cxx/ATT2Txx series, respectively,and they are also bit stream compatible with each other. The usable gate counts associated with each series are provided in Table 1. Both series are offered in a variety of packages, speed grades, and temperature ranges.

The OR2C10A FPGA consists of two basic elements: programmable logic cells (PLCs) and programmable input/output cells (PICs). An array of PLCs is surrounded by PICs as shown in Figure 1. Each PLC contains a programmable function unit (PFU). The PLCs and PICs also contain routing resources and  configuration RAM. All logic of OR2C10A is done in the PFU. Each PFU contains four 16-bit look-up tables (LUTs) and four latches/flip-flops (FFs).

The PLC architecture of OR2C10A provides a balanced mix of logic and routing that allows a higher utilized gate/PFU than alternative architectures. The routing resources carry logic signals between PFUs and I/O pads. The routing in the PLC is symmetrical about the horizontal and vertical axes. This improves routability by allowing a bus of signals to be routed into the PLC from any direction.

Some examples of the resources required and the performance that can be achieved using these OR2C10A are represented in Table 2.

The FPGA OR2C10A's functionality is determined by internal configuration RAM. The FPGA's internal initialization/configuration circuitry loads the configuration data at powerup or under system control. The RAM OR2C10A is loaded by using one of several configuration modes. The configuration data resides externally in an EEPROM, EPROM, or ROM on the circuit board, or any other storage media. Serial ROMs provide a simple, low pin count method for configuring FPGAs, while the peripheral and JTAG configuration modes allow for easy, in-system programming (ISP).