OPL560

Standard Pack Qty :
Product : Photo IC
Number of Channels : 1
Operating Supply Voltage : 4.5 V to 16 V
Supply Current : 8 mA
High Level Output Current : 100 uA
Propagation Delay Time : 5 us
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Rise Time : 70 ns
Fall Time : 70 ns
Output Type : Totem Pole - High


Description

The OPL560 contains a monolithic integrated circuit which incorporates a photodiode, a linear amplifier, voltage regulator, and a Schmitt trigger on a single silicon chip.The devices feature TTL/LSTTL compatible logic level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.The Photologic chip is encapsulated in a molded plastic package which has an integral lens for enhanced optical coupling.

Features of the OPL560 are:(1)four output options; (2)high noise immunity; (3)direct TTL/LSTTL interface; (4)low cost plastic side-looking package; (5)mechanically and spectrally matched to the OP140 and OP240 series LED's; (6)data rates to 200 kBaud; (7)two sensitivity options.

The absolute maximum ratings of the OPL560 can be summarized as:(1)supply voltage:18 V;(2)storage temperature range:-40 to 100;(3)lead soldering temperature:240;(4)operating temperature:-40 to 85;(5)power dissipation:200mW;(6)sinking current:50mA.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s).In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement.In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.

At present there is not too much information about this model.If you are willing to find more about OPL560, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	OPL560
Vendor	TT Electronics/Optek Technology
Category	Sensors, Transducers
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	OPL560 OPL560