© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
NEC's NX5307EK series is a 1310 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. This device is ideal for Synchronous Digital Hierarchy (SDH) systems, intra-office STM-16...
Vendor:Other Category:Other
NEC's NX5307EH series is a 1310 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. This device is ideal for Synchronous Digital Hierarchy (SDH) systems, intra-office STM-16...
Vendor:Other Category:Other
NEC's NX5306EK series is a 1310 nm Multiple Quantum Wel (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. This device is ideal for Synchronous Digital Hierarchy (SDH) systems, long haul STM-1 (L-1...
Vendor:Other Category:Other
NEC's NX5306EH series is a 1310 nm Multiple Quantum Wel (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. This device is ideal for Synchronous Digital Hierarchy (SDH) systems, long haul STM-1 (L-1...
Vendor:Other Category:Other
NEC's NX5304EK is a 1 310 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diodes with InGaAs monitor PIN-PD. These devices are designed for 156 Mb/s: STM-1 (I-1, S-1.1, L-1.1), 622 Mb/s: STM-4 (I-4, S- 4...
Vendor:Other Category:Other
NEC's NX5304EH is a 1 310 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diodes with InGaAs monitor PIN-PD. These devices are designed for 156 Mb/s: STM-1 (I-1, S-1.1, L-1.1), 622 Mb/s: STM-4 (I-4, S- 4...
Vendor:Other Category:Other
Vendor:Other Category:Other
The NX350 is a compact 350 watt Power Factor Corrected, multiple output power supply. All outputs are fully isolated and regulated. Active current sharing circuitry, together with control functions and alarm options, sim...
Vendor:Other Category:Other
NX-32T-P(05) Used with I/O cards, portable personal computers,and the external connections of various small-sized portable terminals.
Vendor:Other Category:Other
NX30TA-15PAA Used with I/O cards, portable personal computers,and the external connections of various small-sized portable terminals.
Vendor:Other Category:Other
The NX301 is a compact 300 watt Power Factor Corrected, multiple output power supply. All outputs are fully isolated and regulated. Active current sharing circuitry, together with control functions and alarm options, sim...
Pack:PLCC Vendor:Other Category:Other
The NexFlash NX29F010 is a 1 Megabit (131,072 bytes) single 5.0V-only Sectored Flash Memory. The NX29F010 provides in-system programming with the standard system 5.0V-only Vcc supply and can be programmed or erased in st...
Vendor:Other Category:Other
The NexFlash™ NX26F011A and NX26F041A Serial Flash Memories are tailored for portable/mobile media-storage applications that transfer and store data, audio and images. Manufactured using NexFlash's patented single ...
Vendor:Other Category:Other
The NexFlash™ NX26F011A and NX26F041A Serial Flash Memories are tailored for portable/mobile media-storage applications that transfer and store data, audio and images. Manufactured using NexFlash's patented single ...
Vendor:Other Category:Other
The NX25P10 (1M-bit), NX25P20 (2M-bit) and NX25P40 (4M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. The NX25P40 is ideal for code download applications as well as ...
Vendor:Other Category:Other
The NX25P10 (1M-bit), NX25P20 (2M-bit) and NX25P40 (4M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. The NX25P20 is ideal for code download applications as well as ...
Vendor:Other Category:Other
The NX25P10 (1M-bit), NX25P20 (2M-bit) and NX25P40 (4M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. They are ideal for code download applications as well as storin...
Vendor:Other Category:Other
NX1BL-32T-KT3B(05) A wide variety of PC cards including LAN, FAX modem, and SCSI.
Vendor:Other Category:Other
Used with I/O cards, portable personal computers,and the external connections of NX-15T-KT9(05) small-sized portable terminals.
Vendor:Other Category:Other
Used with I/O cards, portable personal computers,and the external connections of NX-15TA-CV small-sized portable terminals.
Vendor:Other Category:Other
PC Card frame kits NX1
Vendor:Other Category:Other
NX PC Card frame kits, Back connectors
Vendor:Other Category:Other
NWT190 is a full-band PCS Tx Filter for US-CDMA and US W-CDMA that utilizes Bulk-Acoustic-Wave Filter technology. In typical cellular phone architectures, the transmit filter fits between the driver amplifier and the pow...
Vendor:Other Category:Other
NWR190 is a full-band Rx Filter for PCS US-CDMA and US W-CDMA handset applications utilizing Bulk-Acoustic-Wave Filter technology from Infineon Technologies. The benefits of NWR190 compared to conventional SAW-filter are...
Vendor:Other Category:Other
Vendor:Other Category:Other
The NWK933 is a single chip 3.3V CMOS physical layer solution from MII to the magnetics. It is designed for 10BASE-T and 100BASE-TX Ethernet, based on the IEEE 802.3 specifications.The NWK933 is compatible with the Auto ...
Mfg:WILET Pack:QFP D/C:0622+ Vendor:Other Category:Other
Vendor:Other Category:Other
divio introduces the NW701, the world's first single-chip DV codec. Fully DV-SD "BlueBook" compliant and designed with divio's patented compression technology, the NW701 delivers unrivaled video quality, performance and ...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
CALLER ID ENHANCED TYPE IFSK, CAS, ALerts, Tip.Ring, Hybird sepate Op Amps, Voice Mail stutter dial tone detector NW6006AS.
Vendor:Other Category:Other
The NW6006 device is a single-chip, 3/5 Volt CMOS caller ID with call waiting detection circuit. It can receive signals following Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 & SIN242, and ETSI ETS 300 788-1/-2...
Vendor:Other Category:Other
CALLER ID ENHANCED TYPE IFSK, CAS, Alerts, Tip/Ring, Hybird seperate Op Amps NW6005ASG
Mfg:NEWAVE Vendor:Other Category:Other
CALLER ID ENHANCED TYPE IFSK, CAS, Alerts, Tip/Ring, Hybird seperate Op Amps NW6005AS
Vendor:Other Category:Other
The NW6005 device is a single-chip, 3/5 Volt CMOS caller ID with call waiting detection circuit. It can receive signals following Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 & SIN242, and ETSI ETS 300 788-1/-2...
Vendor:Other Category:Other
The NW6003 device is a single-chip, 3/5 Volt CMOS caller ID and call waiting detection circuit. It can receive signals following Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 & SIN242, and CCA TW/ P&E/312 sp...
Vendor:Other Category:Other
Varistors NVXEDMLV Transient Voltage Suppressors
Vendor:Other Category:Other
Varistors NVTMLV Transient Voltage Suppressors
Vendor:Other Category:Other
The NVS01ZE-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The product provides on-board conversion of a ide range of standard telecom and datac...
Vendor:Other Category:Other
The NVS01YG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The product provides on-board conversion of a ide range of standard telecom and datac...
Vendor:Power-One Category:Power Supplies
CONV DC-DC 18-75V IN 3.3V OUT 3WThe NVS0.9EE-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.9EE-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Power-One Category:Power Supplies
CONV DC-DC 9-36V IN 3.3V OUT 3WThe NVS0.9CE-M6of converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.9CE-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Power-One Category:Power Supplies
CONV DC-DC 18-75V IN 5V OUT 3.5WThe NVS0.7EG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.7EG-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.7CG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The product provides on-board conversion of a ide range of standard telecom and data...
Vendor:Other Category:Other
The NVS0.5ZH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.5ZH-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.5YH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.5YH-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.4ZJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.4ZJ-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.4YJ-M6converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.4YJ-M6 provides on-board conversion of a ide range of standard telecom and d...
Vendor:Other Category:Other
The NVS0.3EJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.3EJ-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.3EH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.3EH-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.3CJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.3CJ-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVS0.3CH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVS0.3CH-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
Varistors NVSMLV Transient Voltage Suppressors
Vendor:Other Category:Other
The NVP3000 is an ASIC solution to fit for 1-Channel DVR application.It integrates pre/post processor, M-JPEG CODEC, hard-disk controller, and key/jog-shuttle interface.In addition, it supports time-laps recording mode w...
Vendor:Other Category:Other
The INTERMETALL Bus (IM Bus for short) NVM 3060 has been designed to control the DIGIT 2000 ICs by the CCU Central Control Unit. Via this bus the CCU can write data to the ICs or read data from them. This means the CCU a...
Vendor:Other Category:Other
Vendor:Other Category:Other
The NVD01ZGG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD01ZGG-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVD01YGG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD01YGG-M6 provides on-board conversion of a ide range of standard telecom and ...
Vendor:Other Category:Other
The NVD0.7EGG-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.7EGG-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.7CGG-M6converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.7CGG-M6 provides on-board conversion of a ide range of standard telecom and...
Vendor:Other Category:Other
The NVD0.5ZHH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.5ZHH-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Power-One Category:Power Supplies
CONVERTER DC/DC 5W 12VDCThe NVD0.5YHH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.5YHH-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3ZJJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3ZJJ-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3YJJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3YJJ-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3EJJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3EJJ-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3EHH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3EHH-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3CJJ-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3CJJ-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.3CHH-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.3CHH-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
The NVD0.1E KK-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.1E KK-M6 provides on-board conversion of a ide range of standard telecom ...
Vendor:Other Category:Other
The NVD0.1CKK-M6 converters are low profile, single and dual outputs, DC/DC converters intended for SMT placement and reflow soldering. The NVD0.1CKK-M6 provides on-board conversion of a ide range of standard telecom an...
Vendor:Other Category:Other
NVC1001 is a 4 ch Color Video Controller for Multiplexer application. This processor accepts 4 inputs, 1 PB input, produces 2 analog outputs and 2 digital outputs which have video format in 8-bit CCIR656 4:2:2. NVC1001 h...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ON D/C:06+ Vendor:Other Category:Other
Vendor:Other Category:Other
The NUP8020X6 is designed for application requiring transient voltage protection capabilitys. The features of NUP8020X6 are as follows: (1)Protects up to 5 Lines in a Single SOT-563 Package; (2)ESD Rating of Class 3B (Ex...
Vendor:Other Category:Other
Mfg:ON D/C:06+ Vendor:Other Category:Other
Vendor:Other Category:Other
The NUP4201MR6 transient voltage suppressor is designed to protect high speed data lines from ESD, EFT, and lighting.
Mfg:ON Pack:2002 Vendor:ON Semiconductor (VA) Category:Circuit Protection
IC TVS DIODE ARRAY HS 500W 8SOIC
Vendor:Other Category:Other
This integrated transient voltage suppressor device (TVS) NUP4108W5 is designed for applications requiring transient overvoltage protection. NUP4108W5 is intended for use in sensitive equipment such as computers, printer...
Vendor:Other Category:Other
This integrated transient voltage suppressor device (TVS) NUP4103FC is designed for applications requiring transient overvoltage protection. NUP4103FC is intended for use in sensitive portable equipment and other applic...
Vendor:ON Semiconductor (VA) Category:Circuit Protection
IC TVS DIODE ARRAY 2LINE SC88Features of the NUP2301MW6T1G are:(1)low capacitance(2.0 pf maximum between I/O lines);(2)single package integration design;(3)provides EDS protection for JEDEC standards JESD22 machine model=class C,human body model=cl...
Mfg:ON D/C:06+ Vendor:Other Category:Other
Mfg:ON Pack:SOT23 D/C:06+PB FREE Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Ultra low capacritance Electrostatic discharge(ESD) protection array in a small SOT23(TO-236AB) surface-mounted device(SMD)plastic package designed to protect one signal line in rail-to-rail configuration from the dama...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ONSEMI D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
This NUF6402MN is a 4 line EMI filter array for wireless applications. Greater than −30 dB attenuation is obtained at frequencies from 800 MHz to 3.0 GHz. NUF6402MN also offers ESD protection clamping transients fr...
Vendor:ON Semiconductor (VA) Category:Filters
IC FILTER 6CH EMI ESD PROT 12DFNThe NUF6401MNT1G belongs to the NUF6401MN.It is a kind of an 6 line EMI filter array for wireless applications.It offers ESD protection-clamping transients from static discharges and this protection is provided across al...
Mfg:ON D/C:06+ Vendor:Other Category:Other
Mfg:ONS Pack:MI FCDCA 6CH EMI PI-FLTR D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
This NUF4402MN is a 4 line EMI filter array for wireless applications. Greater than −25 dB attenuation is obtained at frequencies from 800 MHz to 3.0 GHz. NUF4402MN also offers ESD protection−clamping transie...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ON D/C:06+ Vendor:Other Category:Other
Vendor:Other Category:Other
This NUF2220XV6 is a 2 line EMI filter array for wireless applications. Greater than −20 dB attenuation is obtained at frequencies from 800 MHz to 2.4 GHz. NUF2220XV6 also offers ESD protection−clamping trans...
Mfg:ON Vendor:Other Category:Other
Vendor:Other Category:Other
The NUF2101M is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. The features of NUF2101M are as follows: (1)Provides USB Line Termination, Filtering and ESD Protection; (2)Single I...
Vendor:Other Category:Other
These NUF2042XV6 are designed for applications requiring Line Termination, EMI Filtering and ESD Protection. They are intended for use in upstream USB ports, cellular phones, wireless equipment and computer applications....
© 2008-2012 SeekIC.com Corp.All Rights Reserved.