© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The AC Terminator is used to provide termination for clock and data lines where transmission line effects would otherwise cause wave reflections or signal ringing. These Silicon-based, Tantalum-Nitride resistors and capa...
Vendor:Other Category:Other
The AC Terminator is used to provide termination for clock and data lines where transmission line effects would otherwise cause wave reflections or signal ringing. These Silicon-based, Tantalum-Nitride resistors and capa...
Vendor:Other Category:Other
D/C:02+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Adam Tech 2CHSERIES of multiple pitch Headers and Housings are a matched set of Crimp Wire Housings and PCB mounted Shrouded Headers available in Straight, Right Angle or SMT orientation. Offered in three popular industr...
Vendor:Other Category:Other
T-Filters are typically used for Bi-Directional filtering of EMI and RFI on high speed data lines connecting computer with peripheral. These Silicon-based, Tantalum-Nitride resistors and capacitors feature excellent stab...
Vendor:Other Category:Other
Tapped Filters are typically used for filtering EMI and RFI on high-speed data lines connecting computer with peripheral. These Silicon-based, Tantalum Nitride resistors and capacitors feature excellent stability, temper...
Vendor:Other Category:Other
Chip type 2C5664 by Semicoa Semiconductors provides performance similar to these devices.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
2BHR SERIES is a kind of 2.00mm box header.Adam Tech 2BHR Series 2.0mm Box Headers are dual rowshrouded headers for use with dual row IDC female socket connectors. Our low profile, space saving design has a center ...
Vendor:Other Category:Other
Model 2B56 is a high accuracy, universal thermocouple cold junction compensator. Designed to operate with an external temperature sensor in thermal contact with the cold junction, the 2B56 provides an automatic compensat...
Vendor:Other Category:Other
Models 2B54 and 2B55 are low cost, high performance, four-channel signal conditioners. Both models are functionally complete, providing input protection, isolation and common mode rejection, multiplexing, filtering and a...
Vendor:Other Category:Other
Powerex Dual SCR Modules 2B50 are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. POW-R-BLOKTM has b...
Vendor:Other Category:Other
The model 2B34 is a four-channel signal conditioner providing input protection, multiplexing, and amplification in a single, low cost package. A multi-purpose device, the 2B34 is designed to effectively condition low-lev...
Vendor:Other Category:Other
Models 2B30 and 2B31 are high performance, low cost, com pact signal conditioning modules designed specifically for high accuracy interface to strain gage-type transducers and RTD's (resistance temperature detectors). Th...
Mfg:AD Vendor:Other Category:Other
The model 2B23 is a high performance, low cost voltage to current converter featuring ±1500V pk input to output isolation for interfacing with standard process signals. The input stage of the 2B23 may be single resistor ...
Mfg:NSC D/C:O9+ Vendor:Other Category:Other
Model 2B22 is a high performance, compact voltage-to-current converter offering 1500V dc input to output isolation in interfacing standard process signals. The input stage of the model 2B22 is single resistor programma...
Mfg:AD D/C:DIP Vendor:Other Category:Other
Model 2B20 is a complete, modular voltage-to-current converter providing the user with a convenient way to produce a current output signal which is proportional to the voltage input. The nominal input voltage range is 0 ...
Vendor:Other Category:Other
The 2AG Slo-Blo® fuses are available with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space.
Vendor:Other Category:Other
The 2A8 is a COMMON EMITTER transistor capable of providing 0.5 Watts of Class A, RF output power at 2000 MHz. This transistor is specifically designed for general Class A amplifier applicatons. 2A8-2 utilizes gold metal...
Vendor:Other Category:Other
The 2A265 has fourteen features.(1)650V/800V avalanche rugged CoolMOS.(2)only few external components required.(3)input undervoltage lockout.(4)100kHz switching frequency.(5)Max duty cycle 72%.(6)low power standby mode t...
Vendor:Other Category:Other
The 2A165 has fourteen features.(1)650V/800V avalanche rugged CoolMOS.(2)only few external components required.(3)input undervoltage lockout.(4)100kHz switching frequency.(5)Max duty cycle 72%.(6)low power standby mode t...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:HIT D/C:99 Vendor:MEC Switches Category:Switches
BEZEL SWITCH WHITE
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:MEC Switches Category:Switches
BEZEL SWITCH YELLOW
Vendor:Other Category:Other
Vendor:MEC Switches Category:Switches
BEZEL SWITCH GREY
Vendor:Other Category:Other
Mfg:ZXMN Pack:TSSOP8 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The 29-xxxx-310(Up to 500 mW Fiber Bragg Grating Stabilized 980 nm Pump Modules) is very high kink-free powers to 500 mW, excellent low power stability, with high dynamic range, wavelength selection available, inte...
Vendor:Other Category:Other
The Spansion Family Name is the latest generation 3.0-Volt page mode read family fabricated using the 110 nm MirrorbitTM Flash process technology. 29PL256N are capable of performing simultaneous read and write operation...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mimix Broadband's four stage 26.0-31.0 GHz GaAs MMIC power amplifier is optimized for linear operation with a third order intercept point of +36.0 dBm. 29MPA0373 also includes Lange couplers to achieve good output return...
Vendor:Other Category:Other
The 29LV650LLE-90PFTN is designed as one kind of 64M-bit, 3.0 V-only Flash memory device that has some points of features:(1)0.23 mm Process Technology; (2)Single 3.0 V read, program and erase Minimizes system level powe...
Vendor:Other Category:Other
The 29LV160T-90PFTN is a 16M-bit, 3.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The features of 29LV160T-90PFTN are: (1)Single 3.0 V read, program and erase; (2)Compatible with...
Vendor:Other Category:Other
The 29F52 and 29F53 are 8-bit registered transceivers.Two 8-bit back to back registers store data flowing in both directions between two bidirectional buses. Separate clock,clock enable and 3-STATE output enable signals ...
Mfg:NS Vendor:Other Category:Other
The 29F52 and 29F53 are 8-bit registered transceivers.Two 8-bit back to back registers store data flowing in both directions between two bidirectional buses. Separate clock,clock enable and 3-STATE output enable signals ...
Vendor:Other Category:Other
The 29F040A-90 is designed as one kind of 4-Megabit, electrically erasable, read/write non-volatile flash memory device that has separate Output Enable (OE), Chip Enable (CE), and Write Enable (WE) controls, which elimin...
Vendor:Other Category:Other
Maxwell Technologies' 29F0408 high-performance flash mem-ory. The 29F0408 is a 4M (4,194,304) x 8-bit NAND Flash Memory with a spare 128K (131,072) x 8-bit. A program oper-ation programs the 528-byte page in 250 µ ...
Vendor:Other Category:Other
The 29F002TC-90 is one member of the HY29F002T family which designed as the 2 Megabit, 5 volt-only CMOS flash memory that organized as 262,144 (256K) bytes. It can be programmed and erased in-system with a single 5-volt ...
Vendor:Other Category:Other
The 29DL64DF-70PFTN is designed as one kind of 64 M-bit, 3.0 V-only Flash memory device that is organized into four physical banks : Bank A, Bank B, Bank C and Bank D, which are considered to be four separate memory arra...
Vendor:Other Category:Other
The 29DL640E-90NC is designed as one kind of 8Mbit(1M x 8/512K x 16) CMOS 3.0 volt-only, boot sector flash memory device that offers access time as fast as 70 ns or 90 ns, allowing operation of high-speed microprocessors...
Vendor:Other Category:Other
The 29DL324BE-90NC is designed as one kind of 32M-bit, 3.0 V-only Flash memory device that is organized into two banks, Bank 1 and Bank 2, which can be considered to be two separate memory arrays as far as certain operat...
Vendor:Other Category:Other
The 29DL323TE-90DFTN is designed as one kind of 32M-bit, 3.0 V-only Flash memory device that is organized into two banks, Bank 1 and Bank 2, which can be considered to be two separate memory arrays as far as certain oper...
Vendor:Other Category:Other
The 29DL323TE-90 is designed as one kind of 32M-bit, 3.0 V-only Flash memory that organized as 4M bytes of 8 bits each or 2M words of 16 bits each. These devices are designed to be programmed in-system with the standard ...
Vendor:Other Category:Other
The 29C532E EDAC is a very low power bus-watch 32-bit Error Detection And Correction unit (EDAC). EDAC is used in a high integrity system for monitoring d correcting data values coming from the memory space. Such a bus-...
Mfg:ATMEL Pack:CQFP100 D/C:08+ Vendor:Other Category:Other
The 29C516E Atmel EDAC is a very low power flowthrough 16bit Error Detection And Correction unit (EDAC) with two user data buses. The EDAC is used in a high integrity system for monitoring and correction of data values ...
Vendor:Other Category:Other
Mfg:AD Pack:Unalterable hat Vendor:Other Category:Other
As an interface between low-level logic and solenoids, dc (brush) motors, or stepper motors, the UDN2998W dual full-bridge driver will operate inductive loads up to 50 V with continuous output currents of up to 2 A per b...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Solid Tantalum Chip Capacitors MICROTAN™ Leadframeless Molded 298D
Mfg:MSC Pack:05+ D/C:QFN Vendor:Other Category:Other
Providing over-current protection for each of its eight sourcing outputs, the UDN2987A and UDN2987LW drivers are used as an interface between standard low-level logic and relays, motors, sole-noids, LEDs, and incandescen...
Mfg:MSC Pack:05+ D/C:QFN Vendor:Other Category:Other
Recommended for applications requiring separate logic and load grounds,load supply voltages to 30 V, and load currents to 250 mA, the UDN2985A source driver is used as an interface between standard low-power digital logi...
Mfg:IC D/C:AD694JNZ Vendor:Other Category:Other
Recommended for high-side switching applications that benefit from separate logic and load grounds, these devices encompass load supply voltages to 80 V and output currents to -500 mA. These 8-channel source drivers are...
Mfg:IC D/C:AD694ARZ Vendor:Other Category:Other
Recommended for high-side switching applications that benefit from separate logic and load grounds, these devices encompass load supply voltages to 50 V and output currents to -500 mA. These 8-channel source drivers are...
Vendor:Other Category:Other
298125 is designed for high current circuit protection up to 250 amperes. Ideal for battery and UPS systems requiring ultra-high current protection.
Vendor:Other Category:Other
298100 is designed for high current circuit protection up to 250 amperes. Ideal for battery and UPS systems requiring ultra-high current protection.
Mfg:IC D/C:AD691AARNZ Vendor:Other Category:Other
Recommended for high-side switching applications that benefit from separate logic and load grounds, 2981 encompass load supply voltages to 80 V and output currents to -500 mA. These 8-channel source drivers are useful f...
Vendor:Other Category:Other
298080 is designed for high current circuit protection up to 250 amperes. Ideal for battery and UPS systems requiring ultra-high current protection.
Vendor:Other Category:Other
298060 is designed for high current circuit protection up to 250 amperes. Ideal for battery and UPS systems requiring ultra-high current protection.
Vendor:Other Category:Other
298040 is designed for high current circuit protection up to 250 amperes. Ideal for battery and UPS systems requiring ultra-high current protection.
Vendor:Other Category:Other
The MIC29150/29300/29500/29750 are high current, highaccuracy, low-dropout voltage regulators. Using Micrel'sproprietary Super ßeta PNP™ process with a PNP passelement, these regulators feature 300mV to 370mV...
Vendor:Other Category:Other
Vendor:Other Category:Other
The S-29530A / 630A series are low power 16K / 32K-bit E2PROM with a low operating voltage range. 29630A are organized as 1024-word16-bit and 2048-word16bit, respectively. Each is capable of sequential read, at which t...
Mfg:IC D/C:AD574AJN Vendor:Other Category:Other
Using PWM to minimize power dissipation and maximize load efficiency, the UDN2962W dual driver is recommended for impact printer solenoids and stepper motors. It is comprised of two source/sink driver pairs rated for co...
Mfg:IC D/C:AD557JN Vendor:Other Category:Other
The UDN2961B and UDN2961W are 3.4 A half bridges designed specifically for driving solenoid printheads, stepper motors, and dc motors. The UDN2961B/W consists of a power source driver output,a power sink driver output, a...
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.