© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
FASTPATH Unified Wireless Switching (UWS) enables OEMs to introduce next-generation switching platforms that can seamlessly handle both wireless and wireline traffic on the same platform. As more and more organizations m...
Vendor:Other Category:Other
The FASTPATH Unified Access Point (UAP) offers unique capabilities in a standalone software package for access point products. For unmatched flexibility and investment protection, FASTPATH UAP's architecture enables APs ...
Vendor:Other Category:Other
FASTPATH SMB is the ideal software solution for fully managed products in smaller businesses, industrial automation environments, and converged switching applications.FASTPATH SMB addresses the needs of applications and ...
Vendor:Other Category:Other
FASTPATH Enterprise is designed for enterprise-class, managed Ethernet switches, addressing the needs of high-performance customer networks and advanced applications.The most scalable and feature-rich version of the FAST...
Vendor:Other Category:Other
HALO is pleased to offer this new series of small footprint 10BASE-T FastJacks™, with integrated filters. This series is ideal for low cost Ethernet Controller chip applications requiring signal filtering. IEEE 802...
Vendor:Other Category:Other
Upon application of input power, the output bus capacitors begin to charge. The FARMTM thermistor limits the charge current, and the exponential time constant is determined by the hold-up capacitor value and the thermist...
Vendor:Other Category:Other
The M2 series (D110) Voltage Controlled Oscillators (VCO) directly oscillate in the frequency range of 4 to 30 MHz. The M2 series VCO use a piezoelectric single crystal with high electromechanical coupling coefficient (L...
Vendor:Other Category:Other
The M2 series (F100) of VCO (Voltage Controlled Oscillator) apply to the frequency range 4-30 MHz.The M2 series of VCO have a high reliability and wide controllable frequency ranges using a LiTaO3 piezoelectric single cr...
Vendor:Other Category:Other
The FAR-K4SH-36M000-L0E1 is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 18.2 to 21.2 dB;(2)Pass bandwidth: 6.02 to 8.00 MHz;(3)Rela...
Vendor:Other Category:Other
The FAR-G6KE-1G9600-Y4LY is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.7 to 2.5 dB;(2)Ripple: 0.6 to 1.4 dB;(3)Absolute attenuat...
Vendor:Other Category:Other
The FAR-G5KL-911M50-D4XC is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.2 to 3.0 dB;(2)Ripple in passband: 0.6 to 1.5 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-G5KK-911M50-D4KE is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.9 to 2.5 dB;(2)Ripple in passband: 0.5 to 1.5 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-2G1400-B4GC is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.7 to 2.6 dB;(2)Ripple in passband: 0.3 to 1.4 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-1G9600-B4GP is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.1 to 3.0 dB;(2)Ripple in passband: 0.8 to 2.5 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-1G9600-B4GB is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.6 to 2.5 dB;(2)Ripple in passband: 0.5 to 1.7 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-1G9500-B4GJ is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.1 to 3.0 dB;(2)Ripple in passband: 0.7 to 2.0 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-1G8425-B4GA is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.5 to 2.2 dB;(2)Ripple in passband: 0.4 to 1.8 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KB-1G5754-B4GU is designed as one kind of WCDMA Band VIII Duplexer (Rx balanced) device that has some points of electrical specifications:(1)Insertion loss: 1.2 to 1.6 dB;(2)Pass band ripple: 0.1 to 0.6 dB;(3)V...
Vendor:Other Category:Other
The FAR-F6KB-1G5754-B4GE is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.1 to 1.5 dB;(2)Ripple in passband: 0.1 to 0.6 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-2G1400-D4CG is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.9 to 2.6 dB;(2)Ripple in passband: 0.6 to 1.4 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-2G0175-D4DR is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.8 to 2.2 dB;(2)Ripple in passband: 0.5 to 1.0 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-1G9500-D4DG is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.6 to 2.5 dB;(2)Ripple in passband: 0.6 to 1.5 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-1G8800-L4AF is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.4 to 3.8 dB;(2)Ripple in passband: 1.3 to 2.7 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-1G7475-D4CY is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.5 to 2.9 dB;(2)Ripple in passband: 1.3 to 2.2 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-1G5754-L4AJ is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 0.9 to 1.3 dB;(2)Ripple in passband: 0.1 to 0.5 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F6KA-1G5754-L4AB is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 0.44 to 0.75 dB;(2)Ripple in passband: 0.01 to 0.4 dB;(3)Ab...
Vendor:Other Category:Other
The FAR-F6KA-1G5754-L4AA is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 0.9 to 1.3 dB;(2)Ripple in passband: 0.1 to 0.5 dB;(3)Absol...
Vendor:Other Category:Other
The F6 series of SAW band pass filters apply to the frequency range 1000 to 2500 MHz.The SAW filters are fabricated on a lithium tantalate (LiTaO3) substrate, producing filters with a wide frequencybandwidth, low inserti...
Vendor:Other Category:Other
The F6 series of SAW band pass filters apply to the frequency range 1000 to 2500 MHz.The SAW filters are fabricated on a lithium tantalate (LiTaO3) substrate, producing filters with a wide frequencybandwidth, low inserti...
Vendor:Other Category:Other
The FAR-F5KB-942M50-B4EB is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.6 to 2.5 dB;(2)Ripple: 0.4 to 1.6 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KB-881M50-B4EJ is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.4 to 2.3 dB;(2)Ripple in passband: 0.4 to 1.4 dB;(3)Absol...
Vendor:Other Category:Other
The FAR-F5KB-881M50-B4EA is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.7 to 2.4 dB;(2)Ripple: 0.6 to 1.5 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KB-836M50-B4ER is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.7 to 2.5 dB;(2)Ripple: 0.5 to 1.4 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KB-836M50-B4EG is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.6 to 2.6 dB;(2)Ripple: 0.4 to 1.4 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KA-942M50-D4DD is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 2.0 to 2.7 dB;(2)Ripple: 0.8 to 1.4 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KA-897M50-D4DC is designed as one kind of EGSM Tx (50/50ohm unbalance) device that has some points of electrical specification:(1)Insertion Loss: 2.2 to 3.1 dB;(2)Ripple: 1.1 to 1.9 dB;(3)Absolute attenuation: ...
Vendor:Other Category:Other
The FAR-F5KA-881M50-D4DB is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.7 to 2.3 dB;(2)Ripple: 0.5 to 1.2 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The FAR-F5KA-836M50-D4DF is designed as one kind of CDMA / GSM850 Tx (50/50ohm Unbalance) device that has some points of electrical specification:(1)Insertion Loss: 1.9 to 2.6 dB;(2)Ripple: 0.7 to 1.6 dB;(3)Absolute atte...
Vendor:Other Category:Other
The FAR-F5KA-836M50-D4CM is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 1.8 to 2.3 dB;(2)Ripple: 0.6 to 1.4 dB;(3)Absolute Attenuat...
Vendor:Other Category:Other
The F5CM series of SAW filters have balanced in/unbalanced out or unbalanced in/balanced out of I/O ports.Therefore these filters are suitable for the design using balanced type of IC. By using these filters, any transfo...
Vendor:Other Category:Other
The FAR-F4SE-57M000-H0JC is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 10.7 to 13.7 dB;(2)Relative level 52.83 (52.75) MHz: -43 to...
Vendor:Other Category:Other
The FAR-F4SE-57M000-H0J9 is produced by the FUJITSU media devices limited. The electrical characteristics of this device can be summarized as:(1)Insertion Loss: 10.7 to 13.7 dB;(2)Relative level 52.83 (52.75) MHz: -55 to...
Vendor:Other Category:Other
The FAR-F4SE-57M000-H0J6 could be used in IF Filter for terrestrial-TV. and its system is Japan. the picture carrier frequency is 57.00 MHz.
The specification of the FAR-F4SE-57M000-H0J6 is as following mentioned:(1)ins...
Vendor:Other Category:Other
The FAR-F4SE-44M000-II0A2 could be used in IF Filter for terrestrial-TV. and its system is America. the picture carrier frequency is 44.00 MHz. the FMD Part Number is FAR-F4SE-44M000-H0A2.
The specification of the FAR-F...
Vendor:Other Category:Other
The FAR-F4SE-44M000-H0A8 could be used in IF Filter for terrestrial-TV. and its system is America. the picture carrier frequency is 44.00 MHz. the FMD Part Number is FAR-F4SE-44M000-H0A8.
The specification of the FAR-F4...
Vendor:Other Category:Other
The FAR-F4SE-44M000-H0A6 could be used in IF Filter for terrestrial-TV. and its system is America. the picture carrier frequency is 44.00 MHz.
The specification of the FAR-F4SE-44M000-H0A6 is as following mentioned:(1)...
Vendor:Other Category:Other
The FAR-F4SE-44M000-H0A4 is designed as one kind of IF filter device that can be used in the Terrestrial-TV applications. The proposal specification of this device can be summarized as:(1)Insertion Loss: 18.6 to 21.6 dB;...
Vendor:Other Category:Other
The FAR-F4SE-44M000-H0A3 could be used in TV-IF. and its system is America. the picture carrier frequency is 44.00 MHz. the FMD Part Number is FAR-F4SE-44M000-H0A3.
The specification of the FAR-F4SE-44M000-H0A3 is as fo...
Vendor:Other Category:Other
The FAR-F4SE-43M750-A006 could be used in TV-IF , and the FMD Part Number is FAR-F4SE-43M750-A006.
The specification of the FAR-F4SE-43M750-A006 is as following mentioned:(1)Insertion Loss: 13.3 to 16.3 dB when 44.06 ...
Vendor:Other Category:Other
The FAR-F4SE-36M125-II0E7 could be used in IF Filter for Terrestrial-TV/STB, and the system is Europe / Asia. Picture Carrier Frequency: 36.125MHz. FMD Part Number is FAR-F4SE-36M125-H0E7.
The specification of the FAR-F...
Vendor:Other Category:Other
The FAR-F4SE-36M125-H0E8 could be used in IF Filter for Terrestrial-TV/STB. and its system is Europe/Asia. the picture carrier frequency is 36.125 MHz. the FMD Part Number is FAR-F4SE-36M125-H0E8.
The specification of t...
Vendor:Other Category:Other
The FAR-F4SE-36M125-H0E5 could be used in IF Filter for TV tuner, and the system is Europe. Picture Carrier Frequency: 38.90MHz. FMD Part Number is FAR-F4SE-36M125-H0E5.
The specification of the FAR-F4SE-36M125-H0E5 is ...
Vendor:Other Category:Other
The FAR-F4SE-36M125-A001 could be used in IF Filter for Terrestrial-TV, and the system is South America. Picture Carrier Frequency: 36.125MHz. FMD Part Number is FAR-F4SE-36M125-A001.
The specification of the FAR-F4SE...
Vendor:Other Category:Other
The F4 series are timing extraction filter used in the high-grade digital transmission equipment like wide-band ISDN. The F4 series uses a single lithium tantalate piezoelectric crystal (LiTaO3) that has large electrome...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The F1, F2 and F3 Series were developed as timing extraction filters for primary, secondary, and tertiary digitalcommunication devices.This new all-solid-state bandpass filter (BPF) F1, F2 and F3 Series uses a piezoelect...
Vendor:Other Category:Other
The FAR-D5GK-942M50-D1KF could be used in 900MHz WCDMA Duplexer (Rx Single-ended) , and the FMD Part Number is FAR-D5GK-942M50-D1KF.
The specification of the FAR-D5GK-942M50-D1KF is as following mentioned:(1)Insertion l...
Vendor:Other Category:Other
The FAR-D5GD-942M50-D1DF is designed as one kind of WCDMA Band VIII Duplexer (Rx balanced) device that has some points of Tx to ANT electrical specifications:(1)Insertion loss: 2.2 to 3.0 dB;(2)Pass band ripple: 1.0 to 2...
Vendor:Other Category:Other
The FAR-D5GA-881M50-D1AA is designed as one kind of cellular SAW duplexer device that has some points of Tx to ANT electrical specifications:(1)Insertion loss: 1.7 to 2.2 dB;(2)Pass band ripple: 0.4 to 1.0 dB;(3)VSWR (Tx...
Vendor:Other Category:Other
The D5CC series of SAW antenna duplexer apply to the frequency range 700 to 1000 MHz.The SAW filters are fabricated on a piezoelectric-crystal unit (LiTaO3:lithium tantalate) with a large electrome-chanical dissociation....
Vendor:Other Category:Other
Fujitsu resonators C4 series (N type) feature originally developed single crystals with a high electro-mechanical coefficient (LiNbO3: lithium niobate), the result is very compact packaging. C4 series (N type) with buil...
Vendor:Other Category:Other
The C4 series (L Type) resonators apply to the frequency range 24 to 60 MHz. They are fabricated on a lithium niobate (LiNaO3) substrate, producing resonators with ultra compact and superior stability due to the high ele...
Vendor:Other Category:Other
Fujitsu resonators C4 series (G type) feature originally developed single crystals with a high electromechanical coefficient (LiNbO3 lithium niobate), the result is ultra compact packaging. C4 series (G type) with built-...
Vendor:Other Category:Other
The features of the C3 series (M,N Type) resonators are compact and high stability. They are fabricated on a lithium tantalate (LitaO3) substrate, producing resonators with ultra compact and superior stability due to the...
Vendor:Other Category:Other
Mfg:FSC D/C:08+ Vendor:Other Category:Other
The FAN9612 interleaved dual Boundary-Conduction-Mode (BCM) Power-Factor-Correction (PFC) controller operates two parallel-connected boost power trains 180? out of phase. Interleaving extends the maximum practical power ...
Vendor:Other Category:Other
The FAN8903 is a monolithic integrated circuit, suitable for a window motor control and sun roof motor control in automotive systems.
Mfg:FSC Pack:DIP D/C:00+ Vendor:Other Category:Other
The FAN8902 is a monolithic integrated circuit, designed for the PWM control of a DC fan motor current in an automotive systems. It allows the fan motor speed to be controlled linearly and efficiently.
Vendor:Other Category:Other
Suitable for a 3-phase BLDC (Brush-Less Direct Current) spindlemotor driver with PWM, the monolithic FAN8741/FAN8742 IC alsoincludes 2-ch motor drivers with PWM for sled motors and 4-chlinear drivers which drive the foc...
Vendor:Other Category:Other
Suitable for a 3-phase BLDC (Brush-Less Direct Current) spindlemotor driver with PWM, the monolithic FAN8741/FAN8742 IC alsoincludes 2-ch motor drivers with PWM for sled motors and 4-chlinear drivers which drive the foc...
Vendor:Other Category:Other
The FAN8732G/BG/CG is a monolithic IC suitable for a PWM 3-phase BLDC spindle motor driver, 2-CH PWM motor drivers for sled motor and 3-CH linear drivers which drive the focus actuator, tracking actuator and loading moto...
Mfg:FSC Pack:TSSOP-42 D/C:03+ Vendor:Other Category:Other
The FAN8732G/BG/CG is a monolithic IC suitable for a PWM 3-phase BLDC spindle motor driver, 2-CH PWM motor drivers for sled motor and 3-CH linear drivers which drive the focus actuator, tracking actuator and loading moto...
Vendor:Other Category:Other
The FAN8732G/BG/CG is a monolithic IC suitable for a PWM 3-phase BLDC spindle motor driver, 2-CH PWM motor drivers for sled motor and 3-CH linear drivers which drive the focus actuator, tracking actuator and loading moto...
Mfg:FSC Pack:QFP D/C:02+ Vendor:Other Category:Other
The FAN8729 is a monolithic integrated circuit built-in 4Channel BTL motor and spindle motor drivers, which can drive tracking actuator, focus actuator, sled motor, loading motor, 3-phase BLDC motor, and it is applicable...
Mfg:20160 Pack:FAIRCHILD Vendor:Other Category:Other
The FAN8727 is a monolithic integrated circuit suitable for a 4-CH motor driver which drives the tracking actuator, focus actuator, sled motor, loading motor and 3-phase BLDC spindle motor of the MDP/CAR-MD/CAR-NAVIGATIO...
Mfg:FSC Pack:QFP D/C:02+ Vendor:Other Category:Other
The FAN8725 is a monolithic IC suitable for a 3-phase BLDC spindle motor driver and 5-ch motor drivers which drives the focus actuator, tracking actuator, loading motor, stepping motor driver of the CD-media systems.
Vendor:Other Category:Other
The FAN8705 is a DSC lens motor driver and it's consist of con-stant current and constant voltage drive blocks suitable for shut-ter, single iris,auto-focus and zoom motor drive.
Mfg:FAIRCHILD Pack:06+/07+() D/C:QFN Vendor:Other Category:Other
The FAN8702 is designed for portable equipment such as DSC and mobile phone camera. It consists of 2 constant current and 4 constant voltage drive blocks suitable for shutter, auto-focus, iris and zoom motor drive.
Mfg:QFP PB Pack:FAI D/C:06+ Vendor:Other Category:Other
The FAN8702 is designed for portable equipment such as DSC and mobile phone camera. It consists of 2 constant current and 4 constant voltage drive blocks suitable for shutter, auto-focus, iris and zoom motor drive.
Mfg:FAIRCHILD Pack:QFP D/C:0714+ Vendor:Other Category:Other
The FAN8702 is designed for portable equipment such as DSC and mobile phone camera. It consists of 2 constant current and 4 constant voltage drive blocks suitable for shutter, auto-focus, iris and zoom motor drive.
© 2008-2012 SeekIC.com Corp.All Rights Reserved.