© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The MAX2750/MAX2751/MAX2752 are self-contained volt-age-controlled oscillators (VCOs) intended for use in the2.4GHz to 2.5GHz ISM band. Each IC combines a fullyintegrated oscillator and output buffer in a miniature 8...
Vendor:Other Category:Other
The MAX2750/MAX2751/MAX2752 are self-contained volt-age-controlled oscillators (VCOs) intended for use in the2.4GHz to 2.5GHz ISM band. Each IC combines a fullyintegrated oscillator and output buffer in a miniature 8...
Vendor:Other Category:Other
The MAX2750EUA is one member of the MAX2750 family which is designed as the 2.4GHz monolithic voltage-controlled oscillator that can be used in (1)802.11b DSSS WLAN; (2)802.11 FHSS WLAN; (3)Home RF; (4)2.4GHz Bluetooth I...
Vendor:Other Category:Other
The MAX2750/MAX2751/MAX2752 are self-contained volt-age-controlled oscillators (VCOs) intended for use in the2.4GHz to 2.5GHz ISM band. Each IC combines a fullyintegrated oscillator and output buffer in a miniature 8...
Vendor:Other Category:Other
The MAX2745 complete single-chip global positioning system (GPS) RF front-end downconverter utilizes many innovative and leading-edge RF CMOS design techniques. This high-performance, state-of-the-art device consumes ext...
Vendor:Other Category:Other
The MAX2742 complete single-chip global positioning system (GPS) RF front-end utilizes many innovative and leading-edge RF CMOS design techniques. This highperformance, state-of-the-art device consumes extremely low powe...
Vendor:Other Category:Other
The MAX2741 L1-band GPS receiver IC offers a highperformance, compact solution for mobile handsets, PDAs, and automotive applications. Total voltage gain of 80dB and a 4.7dB cascaded noise figure can provide receiver sen...
Mfg:Maxim Pack:00+ D/C:200 Vendor:Other Category:Other
The MAX2740 is a complete global positioning system (GPS) receiver from antenna output to digitizer input. The signal path includes the LNA, two downconverters, and variable-gain and fixed-gain amplifiers. By utilizing a...
Vendor:Other Category:Other
The MAX274 are continuous-time active filters comsisting of independent cascadable 2nd-order sections. Each section can implement any all-pole bandpass or low pass filter response, such as butter-worth, bessel, and cheby...
Vendor:Other Category:Other
The MAX2720/MAX2721 are low-cost, high-performance,direct I/Q modulators designed for use in wideband-CDMA and wireless local-loop (WLL) systems. Theirdirect-upconversion architecture reduces system cost,component count,...
Vendor:Other Category:Other
The MAX2720/MAX2721 are low-cost, high-performance,direct I/Q modulators designed for use in wideband-CDMA and wireless local-loop (WLL) systems. Theirdirect-upconversion architecture reduces system cost,component count,...
Mfg:MAXIM Vendor:Other Category:Other
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s' zero-IF architectu...
Vendor:Other Category:Other
The MAX2700ECMD is designed as one kind of 1.8GHz to 2.5GHz direct downconversion receiver that belongs to the MAX2700 family. This device can be used in (1)wireless local loop; (2)wideband direct-sequence spread-spectru...
Mfg:MAXIM Vendor:Other Category:Other
The MAX2700/MAX2701 are highly integrated direct downconversion (zero-IF) receivers designed for wideband wireless local loop (WLL) systems operating in the 1.8GHz to 2.5GHz band. The MAX2700/MAX2701s' zero-IF architectu...
Vendor:Other Category:Other
The MAX2690 is a miniature, low-noise, low-power downconverter mixer designed for use in portable consumer equipment. Signals at the RF input port are mixed with signals at the local-oscillator (LO) port using a double-b...
Vendor:Other Category:Other
The MAX2685's low-noise amplifier (LNA) and downconverter mixer comprise the major blocks of an RF front-end receiver. Optimized for 900MHz operation, the device's low noise figure, high gain, and high linearity make it ...
Vendor:Other Category:Other
The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is o...
Vendor:Other Category:Other
The MAX2683/MAX2684 are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital microwave radio (DMR) applications in the 3.4GHz to 3.8GHz frequency band. The MAX2683 is o...
Mfg:MAXIM Pack: SOT D/C:8 Vendor:Other Category:Other
The MAX2682 miniature, low-cost, low-noise downconverter mixer is designed for low-voltage operation and is ideal for use in portable communications equipment. Signals at the RF input port are mixed with signals at the l...
Vendor:Other Category:Other
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for lowvoltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed wit...
Vendor:Other Category:Other
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for lowvoltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed wit...
Vendor:Other Category:Other
The MAX2680/MAX2681/MAX2682 miniature, low-cost, low-noise downconverter mixers are designed for lowvoltage operation and are ideal for use in portable communications equipment. Signals at the RF input port are mixed wit...
Vendor:Other Category:Other
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are ...
Vendor:Other Category:Other
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are ...
Vendor:Other Category:Other
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are ...
Vendor:Other Category:Other
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are ...
Vendor:Other Category:Other
The MAX2660/MAX2661/MAX2663/MAX2671/MAX2673 miniature, low-cost, low-noise upconverter mixers are designed for low-voltage operation and are ideal for use in portable consumer equipment. Signals at the IF input port are ...
Vendor:Other Category:Other
The MAX2659 high-gain, low-noise amplifier (LNA) is designed for GPS, Galileo, and GLONASS applications. Designed in Maxim's advanced SiGe process, the device achieves a 20.5dB gain and an ultra-low-noise figure of 0.8dB...
Vendor:Other Category:Other
The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, WLL, and satellite phone systems. The MAX2654/MAX2655/MAX2656 incorporate on-chip...
Vendor:Other Category:Other
The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, WLL, and satellite phone systems. The MAX2654/MAX2655/MAX2656 incorporate on-chip...
Vendor:Other Category:Other
The MAX2654/MAX2655/MAX2656 high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in GPS, PCS, WLL, and satellite phone systems. The MAX2654/MAX2655/MAX2656 incorporate on-chip...
Vendor:Other Category:Other
The MAX2651/MAX2652/MAX2653 silicon germanium (SiGe), low-noise amplifiers (LNAs) are intended for use in GSM900, DCS1800, and PCS1900 band wireless handsets. The MAX2651/MAX2652 consist of two LNAs, one optimized for th...
Mfg:MAX Pack:SMD D/C:O1/O2 Vendor:Other Category:Other
The MAX2651/MAX2652/MAX2653 silicon germanium (SiGe), low-noise amplifiers (LNAs) are intended for use in GSM900, DCS1800, and PCS1900 band wireless handsets. The MAX2651/MAX2652 consist of two LNAs, one optimized for th...
Vendor:Other Category:Other
The MAX2651/MAX2652/MAX2653 silicon germanium (SiGe), low-noise amplifiers (LNAs) are intended for use in GSM900, DCS1800, and PCS1900 band wireless handsets. The MAX2651/MAX2652 consist of two LNAs, one optimized for th...
Vendor:Other Category:Other
The MAX2650 is a low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a flat gain response to 900MHz. The MAX2650's low noise figure and high drive capability make it i...
Vendor:Other Category:Other
The MAX2649 evaluation kit (EV kit) simplifies evaluation of the MAX2649. The EV kit allows the evaluation of the LNA without requiring additional support circuitry.The signal input and output use SMA connectors to simpl...
Vendor:Other Category:Other
The MAX2648 high-linearity, silicon-germanium (SiGe) low-noise amplifier (LNA) is designed for 5GHz wireless LAN systems based on IEEE 802.11a and HiperLAN2 standards. The LNA provides high gain, low noise, and high line...
Mfg:MAX Vendor:Other Category:Other
The MAX2645 evaluation kit (EV kit) simplifies evaluation of the MAX2645 3.4GHz to 3.8GHz low-noise amplifier/PA predriver. The EV kit is fully assembled and tested, allowing simple evaluation of all device functions. Al...
Mfg:Maxim Pack:SMD D/C:09+ Vendor:Other Category:Other
The MAX2644 low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems. It features a programmable bias, allowing the input IP...
Vendor:Other Category:Other
The MAX2642/MAX2643 evaluation kits (EV kits) simplify evaluation of the MAX2642 and MAX2643 low-noise amplifiers (LNAs). These kits enable testing of the devices' performance and require no additional support circuitry....
Vendor:Other Category:Other
The MAX2642/MAX2643 low-cost, high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in cellular, ISM, SMR, and PMR systems. They feature a programmable bias, allowing the IP3 a...
Vendor:Other Category:Other
The MAX2642/MAX2643 low-cost, high third-order intercept point (IP3), low-noise amplifiers (LNAs) are designed for applications in cellular, ISM, SMR, and PMR systems. They feature a programmable bias, allowing the IP3 a...
Vendor:Other Category:Other
The MAX2640/MAX2641 are low-cost, ultra-low-noise amplifiers designed for applications in the cellular, PCS, GPS, and 2.4GHz ISM frequency bands. Operating from a single +2.7V to +5.5V supply, these devices consume only ...
Vendor:Other Category:Other
The MAX2640/MAX2641 are low-cost, ultra-low-noise amplifiers designed for applications in the cellular, PCS, GPS, and 2.4GHz ISM frequency bands. Operating from a single +2.7V to +5.5V supply, these devices consume only ...
Vendor:Other Category:Other
The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their ...
Vendor:Other Category:Other
The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their ...
Vendor:Other Category:Other
The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their ...
Vendor:Other Category:Other
The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their ...
Vendor:Other Category:Other
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The sig...
Vendor:Other Category:Other
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The sig...
Vendor:Other Category:Other
The MAX2622/MAX2623/MAX2624 evaluation kits (EV kits) simplify evaluation of the MAX2622/MAX2623/MAX2624 VCOs. These kits enable testing of the devices' RF performance and require no additional support circuitry. The sig...
Vendor:Maxim Integrated Products Category:RF and RFID
IC RF OSC W/BUFFERED OUT 8-UMAXThe MAX2620EUA+ is one member of the MAX2620 series which designed as the 10MHz to 1050MHz integrated RF oscillator with buffered outputs. This device can be used in (1)analog cellular phones; (2)digital cellular phones;...
Mfg:MAXIM D/C:04+ Vendor:Other Category:Other
The MAX2620 combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small µMAX package. This device integrates functions typically achieved with discrete components. The ...
Vendor:Other Category:Other
The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz. The MAX2611's low noise figure and high drive capability ...
Vendor:Other Category:Other
The MAX2605MAX2609 evaluation kits (EV kits) simplify evaluation of this family of voltage-controlled oscillators (VCOs). These kits enable testing of the devices' performance and require no additional support circuitry....
Vendor:Other Category:Other
The MAX2605MAX2609 are compact, high-performance intermediate-frequency (IF) voltage-controlled oscillators (VCOs) designed specifically for demanding portable wireless communication systems. They combine monolithic cons...
Vendor:Other Category:Other
The MAX2605MAX2609 are compact, high-performance intermediate-frequency (IF) voltage-controlled oscillators (VCOs) designed specifically for demanding portable wireless communication systems. They combine monolithic cons...
Mfg:500 Vendor:Other Category:Other
The MAX2605MAX2609 are compact, high-performance intermediate-frequency (IF) voltage-controlled oscillators (VCOs) designed specifically for demanding portable wireless communication systems. They combine monolithic cons...
Vendor:Other Category:Other
The MAX2605MAX2609 evaluation kits (EV kits) simplify evaluation of this family of voltage-controlled oscillators (VCOs). These kits enable testing of the devices' performance and require no additional support circuitry....
Vendor:Other Category:Other
The MAX2601/MAX2602 are RF power transistors optimized for use in portable cellular and wireless equipment that operates from three NiCd/NiMH cells or one Li-Ion cell. These transistors deliver 1W of RF power from a 3.6V...
Vendor:Other Category:Other
The MAX2601/MAX2602 are RF power transistors optimized for use in portable cellular and wireless equipment that operates from three NiCd/NiMH cells or one Li-Ion cell. These transistors deliver 1W of RF power from a 3.6V...
Vendor:Other Category:Other
The MAX2560/MAX2566/MAX2572 evaluation kits (EV kits) simplify testing of the MAX2560/MAX2566/ MAX2572. The EV kits provide 50Ω SMA connectors for all RF inputs, baseband inputs, and RF outputs. Onboard VCOs are pr...
Vendor:Other Category:Other
The MAX2560/MAX2566/MAX2572 evaluation kits (EV kits) simplify testing of the MAX2560/MAX2566/ MAX2572. The EV kits provide 50Ω SMA connectors for all RF inputs, baseband inputs, and RF outputs. Onboard VCOs are pr...
Vendor:Other Category:Other
The MAX2560/MAX2566/MAX2572 evaluation kits (EV kits) simplify testing of the MAX2560/MAX2566/ MAX2572. The EV kits provide 50Ω SMA connectors for all RF inputs, baseband inputs, and RF outputs. Onboard VCOs are pr...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC DRVR TRANSFORMER 8-SOICThe MAX253ESA+T is designed as one kind of monolithic oscillator / power-driver device that can be used in (1)isolated RS-485/RS-232 power-supply transformer driver; (2)high noise-immunity communications interface; (3)is...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC XFRMR DRIVER RS485 8-SOICThe MAX253ESA+ is one member of the MAX253 series.The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-ta...
Mfg:MAX Vendor:Other Category:Other
The MAX2530/MAX2531/MAX2538 evaluation kits (EV kits) simplify evaluation of the MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/ MAX2538 high-performance, silicon germanium (SiGe) BiCMOS, quad-mode LNA/mixer ICs...
Mfg:MAXIM Vendor:Other Category:Other
The MAX2530/MAX2531/MAX2538 evaluation kits (EV kits) simplify evaluation of the MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/ MAX2538 high-performance, silicon germanium (SiGe) BiCMOS, quad-mode LNA/mixer ICs...
Mfg:MAXIM D/C:8 Vendor:Other Category:Other
The MAX2531 multiband LNA/Mixer IC is optimized for CDMA, GSM, and TDMA applications in cellular band. The MAX2531 IC features a GPS LNA/mixer signal path for E911 and Traveler Assistance applications. The cellular signa...
Vendor:Other Category:Other
The MAX2530/MAX2531/MAX2538 evaluation kits (EV kits) simplify evaluation of the MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/ MAX2538 high-performance, silicon germanium (SiGe) BiCMOS, quad-mode LNA/mixer ICs...
Vendor:Other Category:Other
The MAX2530/MAX2531/MAX2538 evaluation kits (EV kits) simplify evaluation of the MAX2351/MAX2354/MAX2358/MAX2359/MAX2530/MAX2531/MAX2537/ MAX2538 high-performance, silicon germanium (SiGe) BiCMOS, quad-mode LNA/mixer ICs...
Vendor:Other Category:Other
The MAX253 is a monolithic oscillator/power-driver, specifically designed to provide isolated power for an isolated RS-485 or RS-232 data interface. It drives a center-tapped transformer primary from a 5V or 3.3V DC powe...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC DVR/RCVR DUAL RS232 5V 14-DIPThe MAX251EPD is designed as one kind of +5 V powered isolated RS-232 driver / receiver that can be used in (1)high noise data communications; (2)industrial communications; (3)data links to analog circuits; (4)bridge gro...
Mfg:MAX Pack:SOP Vendor:Other Category:Other
The MAX2511 is a complete, highly integrated IF transceiver for applications employing a dual-conversion architecture. Alternatively, the MAX2511 can be used as a single-conversion transceiver if the RF operating frequen...
Mfg:MAX Pack:SMD D/C:O1/O2 Vendor:Other Category:Other
The MAX2510 is a highly integrated IF transceiver for digital wireless applications. It operates from a +2.7V to +5.5V supply voltage and features four operating modes for advanced system power management.Supply current ...
Mfg:MAX Pack:PLCC44 Vendor:Other Category:Other
The MAX220MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communica-tions interfaces, particularly applications where ±12V is not available. These MAX220MAX249 parts are especially ...
Vendor:Other Category:Other
The MAX2472/MAX2473 are flexible, wideband, highreverse-isolation buffer amplifiers. The MAX2472 has dual open-collector outputs capable of delivering -5dBm into 50 while maintaining harmonic suppression below -25dBc. Th...
Vendor:Other Category:Other
The MAX2472/MAX2473 are flexible, wideband, highreverse-isolation buffer amplifiers. The MAX2472 has dual open-collector outputs capable of delivering -5dBm into 50 while maintaining harmonic suppression below -25dBc. Th...
Mfg:MAX Pack:06+ D/C:SOT23-6 Vendor:Other Category:Other
The MAX2470/MAX2471 are flexible, low-cost, highreverse- isolation buffer amplifiers for applications with discrete and module-based VCO designs. Both feature differential 50 outputs for driving a single differential (ba...
Mfg:MAX Pack:06+ D/C:SOT23-6 Vendor:Other Category:Other
The MAX2470/MAX2471 are flexible, low-cost, highreverse- isolation buffer amplifiers for applications with discrete and module-based VCO designs. Both feature differential 50 outputs for driving a single differential (ba...
Vendor:Other Category:Other
Using the latest high voltage technology based on a patented strip layout, Max247 STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix "W" ide...
Vendor:Other Category:Other
The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All MAX2420/MAX2421/MAX2422/MAX...
Vendor:Other Category:Other
The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All MAX2420/MAX2421/MAX2422/MAX2...
Vendor:Other Category:Other
The monolithic MAX2452 is a quadrature modulator with supporting oscillator and divide-by-8 prescaler. It operates from a single +3V supply and draws only 4.1mA. The modulator accepts differential I and Q baseband signal...
Mfg:MAX Pack:TSSOP Vendor:Other Category:Other
The monolithic MAX2451 is a quadrature demodulator with a supporting oscillator and divide-by-8 prescaler. It operates from a single +3V supply and draws only 5.5mA. The demodulator accepts an amplified and filtered IF s...
Mfg:MAX Pack:N/A D/C:SMD Vendor:Other Category:Other
The MAX2450 combines a quadrature modulator and quadrature demodulator with a supporting oscillator and divide-by-8 prescaler on a monolithic IC. It operates from a single +3V supply and draws only 5.9mA. The demodulator...
Mfg:MAX Vendor:Other Category:Other
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All MAX2440/MAX2441/MAX2442 devices incorporate ...
Vendor:Other Category:Other
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate receive imagereject mixe...
Vendor:Other Category:Other
The MAX2440/MAX2441/MAX2442 highly integrated front-end receiver ICs provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All MAX2440/MAX2441/MAX2442 devices incorporate ...
Mfg:MAX Pack:SMD Vendor:Other Category:Other
The MAX2430 is a versatile, silicon RF power amplifier that operates directly from a 3V to 5.5V supply, making it suitable for 3-cell NiCd or 1-cell lithium-ion battery applications. MAX2430 is designed for use in the 80...
Mfg:MAXIM Pack: SSOP D/C:8 Vendor:Other Category:Other
The MAX2424/MAX2426 highly integrated front-end ICs provide the lowest cost solution for cordless and ISM- band radios operating in the 900MHz band. Both devices incorporate a receive image-reject mixer (to reduce filter...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate transmit...
Vendor:Other Category:Other
The MAX2421EAI is one member of the MAX2421 family which is designed as the 900MHz image-reject transceiver that can be used in (1)cordless phones ; (2)spread-spectrum communications; (3)wireless telemetry ; (4)two-way p...
Vendor:Other Category:Other
The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate transmit...
Vendor:Other Category:Other
The MAX2420EAI is one member of the MAX2420 family which is designed as the 900MHz image-reject transceiver that can be used in (1)cordless phones ; (2)spread-spectrum communications; (3)wireless telemetry ; (4)two-way p...
Mfg:DIP Vendor:Other Category:Other
The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate transmit...
Mfg:MAXIM D/C:08+ Vendor:Other Category:Other
The MAX202EMAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discha...
D/C:0 Vendor:Other Category:Other
The MAX2411A evaluation kit (EV kit) simplifies testing of the MAX2411A. This EV kit allows evaluation of the MAX2411A's low-noise amplifier (LNA), receive downconverter mixer, transmit upconverter mixer, variablegain po...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.