MAX2632

Features:

Single +2.7V to +5.5V Operation
Internally Biased (MAX2630/MAX2631)
Adjustable Bias (MAX2632/MAX2633)
6.6mA Supply Current (insensitive to supply voltage)
1µA Shutdown Current (MAX2631/MAX2633)
3.7dB Noise Figure
13.4dB Gain
Ultra-Small SOT Packages


Application

Personal Communicating Systems Cordless Phones
Global Positioning Systems Cellular Phones
Wireless Local Area Networks ISM Radios
Wireless Local Loops TV Tuners
Land Mobile Radios Set-Top Boxes


Pinout




Specifications

VCC to GND ...............................................................-0.3V to 6V
Input Power........................................................................5dBm
OUT Current ....................................................................±12mA
IN to GND Voltage ..................................................-1.2V to 1.2V
Bias to GND Voltage....................................................0.0V to 3V
Voltage at SHDN Input
(MAX2631/MAX2633) .................................-0.3V to (VCC + 0.3V)
Current into SHDN Input (MAX2631/MAX2633)..................100µA
Continuous Power Dissipation (TA = +70°C)
 SOT143 (derate 4mW/°C above +70°C) .....................320mW
 SOT23-5 (derate 7.1mW/°C above +70°C).................571mW
 SOT23-6 (derate 7.1mW/°C above +70°C).................571mW
Operating Temperature Range .......................-40°C to +85°C
Junction Temperature....................................................+150°C
Storage Temperature Range ........................-65°C to +150°C
Lead Temperature (soldering, 10sec) ..........................+300°C


Description

The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their low noise figure and low supply current make them ideal for receive, buffer, and transmit IF applications.

The MAX2630/MAX2631 are biased internally, eliminating the need for external bias resistors or inductors. The MAX2632/MAX2633 have a user-selectable supply current, which can be adjusted by adding a single external resistor. This allows customized output power and gain according to specific applications requirements. The MAX2631/MAX2633 feature a shutdown pin that allows them to be powered down to less than 1µA supply current. Aside from a single bias resistor required for the MAX2632/MAX2633, the only external components needed for this family of amplifiers are input and output blocking capacitors and a VCC bypass capacitor.

The MAX2630 comes in a 4-pin SOT143 package, requiring minimal board space. The MAX2631/MAX2632 come in small 5-pin SOT23 packages. The MAX2633 comes in a 6-pin SOT23 package.