© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:MAXIM Pack: QSOP D/C:8 Vendor:Other Category:Other
The MAX1777/MAX1977/MAX1999 dual step-down,switch-mode power-supply (SMPS) controllers generate logic-supply voltages in battery-powered systems. The MAX1777/MAX1977/MAX1999 include two pulse-width modulation (PWM) contr...
Vendor:Other Category:Other
The MAX1777/MAX1977/MAX1999 dual step-down, switch-mode power-supply (SMPS) controllers generate logic-supply voltages in battery-powered systems. The MAX1777/MAX1977/MAX1999 include two pulse-width modulation (PWM) cont...
Vendor:Other Category:Other
The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5%) output voltage is preset ...
Mfg:MAXIM Pack:N/A D/C:09+ Vendor:Other Category:Other
The MAX1973/MAX1974 are constant-frequency 1.4MHz pulse-width-modulated (PWM) current-mode step-down regulators. The output voltage can be set as low as 0.75V using an external voltage-divider, or it can be set to preset...
Vendor:Other Category:Other
The MAX1973/MAX1974 are constant-frequency 1.4MHz pulse-width-modulated (PWM) current-mode step-down regulators. The output voltage can be set as low as 0.75V using an external voltage-divider, or it can be set to preset...
Vendor:Other Category:Other
The MAX1970/MAX1971/MAX1972 dual-output currentmode PWM buck regulators operate from 2.6V to 5.5V input and deliver a minimum of 750mA on each output. The MAX1970 and MAX1972 operate at a fixed 1.4MHz (MAX1971 operates a...
Vendor:Other Category:Other
The MAX1970/MAX1971/MAX1972 dual-output currentmode PWM buck regulators operate from 2.6V to 5.5V input and deliver a minimum of 750mA on each output. The MAX1970 and MAX1972 operate at a fixed 1.4MHz (MAX1971 operates a...
Vendor:Other Category:Other
The MAX19708 is an ultra-low-power, mixed-signal ana-log front-end (AFE) designed for TD-SCDMA handsets and data cards. Optimized for high dynamic perfor-mance at ultra-low power, the device integrates a dual 10-bit, 11M...
Vendor:Other Category:Other
The MAX19707 is an ultra-low-power, mixed-signal analog front-end (AFE) designed for power-sensitive communication equipment. Optimized for high dynamic performance at ultra-low power, the MAX19707device integrates a dua...
Vendor:Other Category:Other
The MAX19706 is an ultra-low-power, mixed-signal analog front-end (AFE) designed for power-sensitive communication equipment. Optimized for high dynamic performance at ultra-low power, the MAX19706 device integrates a du...
Vendor:Other Category:Other
The MAX19705 is an ultra-low-power, mixed-signal analog front-end (AFE) designed for power-sensitive communication equipment. Optimized for high dynamic performance at ultra-low power, the device integrates a dual 10-bit...
Vendor:Other Category:Other
The MAX19700 is an ultra-low-power, mixed-signal analog front-end (AFE) designed for TD-SCDMA handsets and data cards. Optimized for high dynamic performance at ultra-low power, the MAX19700 integrates a dual 10-bit, 7.5...
Vendor:Other Category:Other
The MAX1970/MAX1971/MAX1972 dual-output currentmode PWM buck regulators operate from 2.6V to 5.5V input and deliver a minimum of 750mA on each output. The MAX1970 and MAX1972 operate at a fixed 1.4MHz (MAX1971 operates a...
Mfg:MAXIM D/C:O9+ Vendor:Other Category:Other
The MAX197 multi-range, 12-bit data-acquisition sys-tem (DAS) requires only a single +5V supply for opera-tion, yet accepts signals at its analog inputs that may span both above the power-supply rail and below ground. Th...
Vendor:Maxim Integrated Products Category:Programmers, Development Systems
EVALUATION KIT FOR MAX196/198The features of MAX196EVKIT-DIP can be summarized as:(1)stand-alone demo;(2)proven pc board layout;(3)user prototype area;(4)fully assembled and tested;(5)jumper-selectable configuration.
The clock and power-down select...
Mfg:MAXIM Pack: SSOP D/C:8 Vendor:Other Category:Other
The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systemsprovide si...
Vendor:Other Category:Other
The MAX1968/MAX1969 are highly integrated and costeffective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges i...
Vendor:Other Category:Other
The MAX1968/MAX1969 are highly integrated and costeffective, high-efficiency, switch-mode drivers for Peltier thermoelectric cooler (TEC) modules. Both devices utilize direct current control to eliminate current surges i...
Vendor:Other Category:Other
The MAX1966/MAX1967 are voltage-mode pulse-widthmodulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and sy...
Vendor:Other Category:Other
The MAX1966/MAX1967 are voltage-mode pulse-widthmodulated (PWM), step-down DC-DC controllers that are ideal for a variety of cost-sensitive applications. They drive low-cost N-MOSFETs for both the high-side switch and sy...
Vendor:Other Category:Other
The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. O...
Vendor:Other Category:Other
The MAX1964/MAX1965 power-supply controllers are designed to address cost-sensitive applications demanding voltage sequencing/tracking, such as cable modem consumer premise equipment (CPE), xDSL CPE, and set-top boxes. O...
Vendor:Other Category:Other
The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5%) output voltage of MAX1963...
Vendor:Other Category:Other
The MAX1960/MAX1961/MAX1962 high-current, highefficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump of MAX19...
Vendor:Other Category:Other
The MAX1960/MAX1961/MAX1962 high-current, highefficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generate...
Vendor:Other Category:Other
The MAX1960/MAX1961/MAX1962 high-current, highefficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generate...
Mfg:MAX Pack:N/A D/C:SMD Vendor:Other Category:Other
The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide s...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC ADC 16BIT 85KSPS SHTDN 16-DIPThe MAX195BCPE is designed as one kind of 16-bit successive-approximation analog-to-digital converter (ADC) device that can be used in wide range of applications such as (1)portable instruments; (2)audio; (3)industrial c...
Vendor:Other Category:Other
The MAX1958/MAX1959 evaluation (EV) kit demonstrates an application circuit ideal for use with hetero-junction bipolar transistor power amplifiers (HBT PA). The MAX1958/MAX1959 application circuit features an 800mA DC-to...
Vendor:Other Category:Other
The MAX19586 is a 3.3V, high-speed, high-performance analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) and a 16-bit converter core. It is optimized for multichannel, multimode...
Vendor:Other Category:Other
The MAX1958/MAX1959 evaluation (EV) kit demonstrates an application circuit ideal for use with hetero-junction bipolar transistor power amplifiers (HBT PA). The MAX1958/MAX1959 application circuit features an 800mA DC-to...
Mfg:MAX Pack:MSOP D/C:04+ Vendor:Other Category:Other
The MAX1953/MAX1954/MAX1957 is a family of versatile, economical, synchronous current-mode, pulse-width modulation (PWM) buck controllers. These step-down controllers are targeted for applications where cost and size are...
Vendor:Other Category:Other
The MAX1955/MAX1956 are dual-output, fixed-frequency, voltage-mode, pulse-width modulated (PWM) step-down controllers with 0.5% output accuracy. Each controller switches at a constant 600kHz and is 180° out-of-phase with...
Vendor:Other Category:Other
The MAX1955/MAX1956 are dual-output, fixed-frequency, voltage-mode, pulse-width modulated (PWM) step-down controllers with 0.5% output accuracy. Each controller switches at a constant 600kHz and is 180° out-of-phase with...
Vendor:Other Category:Other
The MAX1954AEUB is one member of the MAX1954A family which is designed as the evaluation kit (EV kit) that demonstrates the MAX1954A buck controller application circuit. Features of the MAX1954AEUB are:(1)current-mode co...
Vendor:Other Category:Other
The MAX1954A evaluation kit (EV kit) demonstrates the MAX1954A buck controller application circuit. The EV kit generates a 1.5V output voltage at load currents up to 5A from a 10.8V to 13.2V input voltage range independe...
Vendor:Other Category:Other
The MAX19541 monolithic 12-bit, 125Msps analog-todigital converter (ADC) is optimized for outstanding dynamic performance at high-IF frequencies of 300MHz and beyond. This device operates with conversion rates up to 125M...
Vendor:Other Category:Other
The MAX1953/MAX1954/MAX1957 is a family of versatile, economical, synchronous current-mode, pulse-width modulation (PWM) buck controllers. These step-down controllers are targeted for applications where cost and size are...
Vendor:Other Category:Other
The MAX19538 is a 3.3V, 12-bit, 95Msps analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) input amplifier, driving a low-noise internal quantizer. The analog input accepts sing...
Vendor:Other Category:Other
The MAX1953/MAX1954/MAX1957 is a family of versatile, economical, synchronous current-mode, pulse-width modulation (PWM) buck controllers. These step-down controllers are targeted for applications where cost and size are...
Vendor:Other Category:Other
The MAX1951 evaluation kit (EV kit) provides a 1.5V output voltage from a 2.6V to 5.5V input source.The output voltage can be adjusted from 0.8V to VIN. The MAX1951 delivers up to 1.5A output current. The MAX1951 is a fi...
Mfg:MAXIM Pack:SOP8 Vendor:Other Category:Other
The MAX1951 high-efficiency, DC-to-DC step-down switching regulator delivers up to 1.5A of output current. The device operates from an input voltage range of 2.6V to 5.5V and provides an output voltage from 0.8V to VIN, ...
Mfg:Maxim Pack:SOP/DIP D/C:06+ Vendor:Other Category:Other
The MAX195 is a 16-bit successive-approximation analog- to-digital converter (ADC) that combines high speed, high accuracy, low power consumption, and a 10µA shutdown mode. Internal calibration circuitry corrects l...
Mfg:MAXIM Pack: TDFN D/C:8 Vendor:Other Category:Other
Vendor:Other Category:Other
The MAX1947 is a compact, high-efficiency, step-up DCDC converter that regulates output voltages from 1.8V to 3.3V to power P/DSP cores, memory, and I/O rails in 1-and 2-cell alkaline/NiMH/NiCd battery-powered systems.It...
Mfg:N/A Pack:N/A D/C:N/A Vendor:Other Category:Other
The MAX1946 single current-limited switch with autoreset supplies a guaranteed 500mA load in accordance with USB specifications. The MAX1946 operates from a 2.7V to 5.5V input supply and consumes only 40µA of quies...
Vendor:Other Category:Other
The MAX1945R/MAX1945S high-efficiency pulse-width modulation (PWM) switching regulators deliver up to 6A of output current. The devices operate from an input supply range of 2.6V to 5.5V and provide selectable output vol...
Vendor:Other Category:Other
The MAX1945R/MAX1945S high-efficiency pulse-width modulation (PWM) switching regulators deliver up to 6A of output current. The devices operate from an input supply range of 2.6V to 5.5V and provide selectable output vol...
Vendor:Other Category:Other
The MAX1945 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a high-efficiency step-down switching-regulator circuit for applications requiring on-board postregulation. Th...
Vendor:Other Category:Other
The MAX1940 triple current-limited switch with autoreset supplies a guaranteed 500mA load per channel in accordance with USB specifications. The MAX1940 operates from a 4V to 5.5V input supply and consumes only 60µ...
Vendor:Other Category:Other
The MAX194 is a 14-bit successive-approximation analog- to-digital converter (ADC) that combines high speed, high accuracy, low power consumption, and a 10µA shutdown mode. Internal calibration circuitry corrects l...
Mfg:MAXIM Pack:SSOP D/C:0412+ Vendor:Other Category:Other
The MAX1937/MAX1938/MAX1939 comprise a family of synchronous, two-phase, step-down controllers capable of delivering load currents up to 60A. The controllers utilize Quick-PWM™ control architecture in conjunction w...
Vendor:Other Category:Other
The MAX1937/MAX1938/MAX1939 comprise a family of synchronous, two-phase, step-down controllers capable of delivering load currents up to 60A. The controllers utilize Quick-PWM™ control architecture in conjunction w...
Vendor:Other Category:Other
The MAX1937/MAX1938/MAX1939 comprise a family of synchronous, two-phase, step-down controllers capable of delivering load currents up to 60A. The controllers utilize Quick-PWM™ control architecture in conjunction w...
Vendor:Other Category:Other
The MAX1935 low-dropout linear regulator operates from a 2.25V to 5.5V supply and delivers a guaranteed 500mA load current with low 175mV dropout. The highaccuracy (±1.5%) output voltage is preset at an internally trimme...
Vendor:Other Category:Other
The MAX1932 generates a low-noise, high-voltage output to bias avalanche photodiodes (APDs) in optical receivers. Very low output ripple and noise is achieved by a constant-frequency, pulse-width modulated (PWM) boost to...
Vendor:Other Category:Other
The MAX1931 is a current-limited, 60m switch with built-in fault blanking. Its accurate preset current limit of 0.64A to 1.06A makes it ideally suited for USB applications.The device's low quiescent supply current (14A) ...
Vendor:Other Category:Other
The MAX1930 current-limited 70m switch with built-in fault blanking provides an accurate, preset 1.2A to 2.3A current limit, making it ideal for dual USB applications.Its low quiescent supply current (16A) and standby cu...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC ADC LP 10-BIT 133KHZ 20-SOICThe MAX192BCWP+ is designed as one kind of low-cost, 10-bit data-acquisition system that combines an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and ultra-low power c...
Vendor:Other Category:Other
The MAX1927/MAX1928 800mA step-down converters power low-voltage microprocessors in compact equipment requiring the highest possible efficiency. The MAX1927/MAX1928 are optimized for generating low output voltages (down ...
Vendor:Other Category:Other
The MAX1927/MAX1928 800mA step-down converters power low-voltage microprocessors in compact equipment requiring the highest possible efficiency. The MAX1927/MAX1928 are optimized for generating low output voltages (down ...
Vendor:Other Category:Other
The MAX1925/MAX1926 single-cell lithium-ion (Li+) switch-mode battery chargers use an external PMOS pass element step-down configuration. Charge current is programmable, and an external capacitor sets the maximum charge ...
Vendor:Other Category:Other
The MAX1925/MAX1926 single-cell lithium-ion (Li+) switch-mode battery chargers use an external PMOS pass element step-down configuration. Charge current is programmable, and an external capacitor sets the maximum charge ...
Mfg:MAXIM Pack:SSOP Vendor:Other Category:Other
The MAX1894/MAX1924 are lithium-ion/lithium-polymer (Li+) battery-pack protector ICs for 3- or 4-series Li+ battery packs. The MAX1894/MAX1924 enhance the useful operating life of Li+ batteries by monitoring individual c...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SW CUR LIMIT USB 8-SOICThe MAX1922ESA+ is designed as one kind of 1A current-limited switch that has several safety features to ensure that the USB port is protected. And this device is offered in a space-saving 8-pin SO package and a 10-pin T...
Mfg:MAXIM Pack:SMD8 Vendor:Other Category:Other
The MAX1922 current-limited 70m switch with built-in fault blanking provides an accurate, preset 1.4A to 2.1A current limit, making it ideal for dual USB applications.Its low quiescent supply current (16A) and standby cu...
Vendor:Other Category:Other
The MAX1920/MAX1921 step-down converters deliver over 400mA to outputs as low as 1.25V. These converters use a unique proprietary current-limited control scheme that achieves over 90% efficiency. These devices maintain e...
D/C:7 Vendor:Other Category:Other
The MAX1920/MAX1921 step-down converters deliver over 400mA to outputs as low as 1.25V. These converters use a unique proprietary current-limited control scheme that achieves over 90% efficiency. These devices maintain e...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The MAX192 is a low-cost, 10-bit data-acquisition system that combines an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and ultra-low power consumption. The device oper...
Vendor:Other Category:Other
The features of MAX191EVSYS-DIP can be summarized as:(1)ev system includes ev kit and 80c32 c module;(2)12-bit resolution, 1/2lsb linearity adc;(3)ev system operates in:unipolar- or bipolar-input mode,serial- or parallel...
Mfg:MAXIM D/C:06+ Vendor:Other Category:Other
The MAX1917 provides a complete power-management solution for DDR memory. It contains a synchronous buck controller and an amplifier to generate 1/2VDDR voltage for VTT and VTTR. The VTT and VTTR voltages are maintained ...
Mfg:maxin Pack:sot23-6 D/C:02+ Vendor:Other Category:Other
The MAX1916 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It uses a single resistor to set the bias current for three LED...
Vendor:Other Category:Other
The MAX1912/MAX1913 power LEDs with a regulated output voltage or current (up to 60mA) from an unregulated input supply (2.7V to 5.3V). These MAX1912/MAX1913 are complete DC-DC converters requiring only four small ceram...
Vendor:Other Category:Other
The MAX1912/MAX1913* power LEDs with a regulated output voltage or current (up to 60mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors an...
Vendor:Other Category:Other
The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors an...
Mfg:Maxim Pack:SOP/DIP D/C:06+ Vendor:Other Category:Other
The MAX191 is a monolithic, CMOS, 12-bit analog-to-digital converter (ADC) featuring differential inputs, track/hold (T/H), internal voltage reference, internal or external clock, and parallel or serial µP interfac...
Vendor:Other Category:Other
The MAX1909 highly integrated control IC simplifies construction of accurate and efficient multichemistry battery chargers. The MAX1909 uses analog inputs to control charge current and voltage, and can be programmed by a...
Vendor:Other Category:Other
The MAX1908ETI is one member of the MAX1908 family which is designed as the low-cost multichemistry battery charger that can be used in (1)notebook and subnotebook computers; (2)personal digital assistants; (3)hand-held ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The MAX1906 evaluation kit (EV kit) is a complete, fully assembled and tested circuit board that is used to evaluate the MAX1906 lithium-ion (Li+) battery-pack protector.The MAX1906 EV kit protects the battery pack by bl...
Vendor:Other Category:Other
The MAX1906 evaluation kit (EV kit) is a complete, fully assembled and tested circuit board that is used to evaluate the MAX1906 lithium-ion (Li+) battery-pack protector.The MAX1906 EV kit protects the battery pack by bl...
Vendor:Other Category:Other
The MAX1906S evaluation kit (EV kit) is a complete, fully assembled and tested circuit board that is used to evaluate the MAX1906 lithium-ion (Li+) battery-pack protector.The MAX1906 EV kit protects the battery pack by b...
Vendor:Other Category:Other
The MAX1906 protects against overvoltage conditions in lithium-ion/lithium polymer (Li+) battery packs by blowing a three-terminal protection fuse. The IC should be used in conjunction with resettable protection circuits...
Mfg:MAXIM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The MAX1901/MAX1902/MAX1904 are buck-topology,step-down, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems.These MAX1901/MAX1902/MAX1904 high-performance, dual/triple-o...
Mfg:MAXIM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The MAX1901/MAX1902/MAX1904 are buck-topology,step-down, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems.These MAX1901/MAX1902/MAX1904 high-performance, dual/triple-o...
Mfg:MAX Pack:MLP D/C:06+ Vendor:Other Category:Other
The MAX1901/MAX1902/MAX1904 are buck-topology,step-down, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems.These MAX1901/MAX1902/MAX1904 high-performance, dual/triple-ou...
Vendor:Other Category:Other
The MAX1898, with an external PNP or PMOS transistor,forms a complete charger for 1-cell lithium-ion (Li+) batteries.It provides accurate constant-current/constant-voltage charging. Battery regulation voltage accuracy i...
Vendor:Other Category:Other
The MAX1887/MAX1897 step-down slave controllers are intended for low-voltage, high-current, multiphase DC-to- DC applications. The MAX1887/MAX1897 slave controllers can be combined with any of Maxim's Quick-PWM™ st...
Vendor:Other Category:Other
The MAX1896 step-up DC-DC converter incorporates high-performance current-mode, fixed-frequency, pulse-width modulation (PWM)circuitry and an internal 0.7 N-channel MOSFET to provide a highly efficient regulator with fas...
Vendor:Other Category:Other
The MAX1895/MAX1995 integrated controllers are optimized to drive cold-cathode fluorescent lamps (CCFL) using a synchronized full-bridge inverter architecture. Synchronized drive provides near sinusoidal waveforms over t...
Vendor:Other Category:Other
The MAX1894/MAX1924 are lithium-ion/lithium-polymer (Li+) battery-pack protector ICs for 3- or 4-series Li+ battery packs. The MAX1894/MAX1924 enhance the useful operating life of Li+ batteries by monitoring individual c...
Mfg:MAX Pack:N/A D/C:SMD Vendor:Other Category:Other
The MAX187/MAX189 serial 12-bit analog-to-digital converters (ADCs) operate from a single +5V supply and accept a 0V to 5V analog input. Both parts feature an 8.5µs successive-approximation ADC, a fast track/hold (...
Vendor:Other Category:Other
The MAX1889 provides the three regulated output voltages required for active matrix, thin-film transistor liquid crystal displays (TFT LCDs). It combines a high-performance step-up regulator with two linear-regulator con...
Vendor:Other Category:Other
The MAX1888 is a three-input decoder with three opendrain outputs. It is used with the MAX1718 or a similar DC-to-DC controller to offset the CPU core voltage in notebook computers. Designed to interface with lowvoltage ...
Vendor:Other Category:Other
The MAX1887/MAX1897 step-down slave controllers are intended for low-voltage, high-current, multiphase DC-to- DC applications. The MAX1887/MAX1897 slave controllers can be combined with any of Maxim's Quick-PWM™ st...
Vendor:Other Category:Other
The MAX1886 is a high-current operational transconductance amplifier. It is ideal for driving the backplane of an active matrix, dot inversion thin film transistor (TFT) liquid crystal display (LCD). The MAX1886's high &...
Vendor:Other Category:Other
The MAX1778/MAX1880MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power...
Vendor:Other Category:Other
The MAX1778/MAX1880MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power...
Vendor:Other Category:Other
The MAX1778/MAX1880MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power...
Vendor:Other Category:Other
The MAX1778/MAX1880MAX1885 multiple-output DC-DC converters provide the regulated voltages required by active matrix thin-film transistor (TFT) liquid crystal displays (LCD) in a low-profile TSSOP package. One high-power...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.