Features: ` Accurate Current Limit (1.4A min, 2.1A max)` 10ms InternalOC Blanking Timeout`OC Blanking During Power-Up` 125m max High-Side MOSFET` Short-Circuit and Thermal Protection with Overcurrent Logic Output` Undervoltage Lockout` 16A Quiescent Supply Current` 1A (max) Standby Supply Current`...
MAX1922: Features: ` Accurate Current Limit (1.4A min, 2.1A max)` 10ms InternalOC Blanking Timeout`OC Blanking During Power-Up` 125m max High-Side MOSFET` Short-Circuit and Thermal Protection with Overcurren...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
IN, EN, OC to GND...................................................-0.3V to +6V
OUT to GND ................................................-0.3V to (VIN + 0.3V)
Maximum Switch Current.........................2.3A (internally limited)
OUT Short-Circuit to GND ..........................................Continuous
Continuous Power Dissipation (TA = +70°C)
8-Pin SO (derate 5.88mW/°C above +70°C)................471mW
Operating Temperature Range (extended).........-40°C to +85°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10s) ..................................+300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
The MAX1922 current-limited 70m switch with built-in fault blanking provides an accurate, preset 1.4A to 2.1A current limit, making it ideal for dual USB applications.Its low quiescent supply current (16A) and standby current (1A) conserve battery power in portable applications.The MAX1922 operates with inputs from 2.7V to 5.5V, making it ideal for both 3V and 5V systems.
An overcurrent signal (OC) notifies the microprocessor that the internal current limit has been reached. A 10ms overcurrent-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system. This blanking also prevents an OC signal from being issued when the device is powering up.The MAX1922 has several safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperature.The device also has accurate internal currentlimiting circuitry to protect the input supply against overload.
The MAX1922 is offered in a space-saving 8-pin SO package and operates over the extended (-40°C to +85°C) temperature range.