MAX1928

IN1, IN2, OUT, SHDN  , SET to GND ......................................-0.3V, +6V
PGND to GND .................................................................-0.3V to +0.3V
LX, REF, FB to GND ...........................................-0.3V to (VBATT + 0.3V)
Continuous Power Dissipation (TA = +70°C)
10-Pin MAX (derate 5.6mW/°C above +70°C) ........................444mW

Operating Temperature Range ....................................-40°C to +85°C
Junction Temperature................................................................+150°C
Storage Temperature Range ......................................-65°C to +150°C
Lead Temperature (soldering, 10s) ...........................................+300°C

The MAX1927/MAX1928 800mA step-down converters power low-voltage microprocessors in compact equipment requiring the highest possible efficiency. The MAX1927/MAX1928 are optimized for generating low output voltages (down to 750mV) at high efficiency using small external components. The supply voltage range is from 2.6V to 5.5V and the guaranteed minimum output current is 800mA. 1MHz pulse-width modulation(PWM) switching allows for small external components. A unique control scheme minimizes ripple at light loads, while maintaining a low 140A quiescent current.

The MAX1927/MAX1928 include a low on-resistance internal MOSFET switch and synchronous rectifier to maximize efficiency and minimize external component count. No external diode is needed. 100% duty-cycle operation allows for a dropout voltage of only 340mV at 800mA. Other features include internal soft-start, power-OK (POK) output, and selectable for lower noise at all load currents.

The MAX1928 is available with several preset output voltages: 1.5V (MAX1928-15), 1.8V (MAX1928-18), and 2.5V (MAX1928-25). The MAX1927R has adjustable output range down to 0.75V. The MAX1927/MAX1928 are available in a tiny 10-pin MAX package.