Published:2011/8/12 21:12:00 Author:Ariel Wang | Keyword: Demodulator, radio frequency, IF, subsystem
View full Circuit Diagram | Comments | Reading(1205)
Published:2011/8/12 21:10:00 Author:Ariel Wang | Keyword: 555, optical tester
It is the optical tester circuit.It consists of photoelectric sensor,monoflop and audio circuit.The photoelectric sensor uses photocell 2CR33.
(View)
View full Circuit Diagram | Comments | Reading(846)
Published:2011/8/12 21:02:00 Author:Ariel Wang | Keyword: amplier, Voltage-tuned , Dual-gate, MOSFET, RF , amplifier
View full Circuit Diagram | Comments | Reading(2157)
Published:2011/8/12 21:00:00 Author:Ariel Wang | Keyword: amplier, JFET , RF, amplifier
View full Circuit Diagram | Comments | Reading(1707)
Published:2011/8/12 20:59:00 Author:Ariel Wang | Keyword: amplier, Common base , JFET, RF, amplifier
View full Circuit Diagram | Comments | Reading(1103)
Published:2011/8/12 20:58:00 Author:Ariel Wang | Keyword: amplier, RF, amplifier
View full Circuit Diagram | Comments | Reading(1034)
Published:2011/8/10 7:24:00 Author:Fiona | Keyword: Input choice relation
electrical level of the input choice terminal
selection objects
the 2 pin
L (<0.5 V)
the 12 pin's input singal
H (>2.0 V)
the3pin's input singal (View)
View full Circuit Diagram | Comments | Reading(541)
Published:2011/8/9 23:43:00 Author:Fiona | Keyword: Format control relation
SYS1’S 11 pin
SYS2’S 10 pin
COLOR SYSTEM
L
L
PALM
L
H
PALB、G、H、D、I
H
L
NTSCN
H
H
PALN (View)
View full Circuit Diagram | Comments | Reading(432)
Published:2011/8/10 7:18:00 Author:Fiona | Keyword: Output choice relation
electrical level of the input choice terminal
selection objects
the 15 pin
L (<0.5 V)
comb type filter Y/C separation signal
H (>2.0 V)
S terminal Y/C separation signal (View)
View full Circuit Diagram | Comments | Reading(621)
Published:2011/7/20 6:51:00 Author:Fiona | Keyword: buck /boost, constant current, driver
working principleThe input circuit consists of the fusible resistor R1,VD1,VD2,C1,CZ and filter inductor u;power adjustment circuit consists of LNK3OGP,energy storage inductor L2,VD3,R2,C4 and C5.When LNK306 turns on, the input current I constitutes a loop through (LNK306) D → (LNK306) S → L2 → C2 (-) and stores the input current IIN in inductor L2 (the inductor current linear increases by UI / LI),the polarity is that up is positive and under is negative;when LNK306 is off,it can't be mutated because of the inductor current(inductor current decreases linearly by UI/L1),the polarity is that up is negative and under is positive;the energy stored in L2 constitutes a loop through by the lower end of L2(ground) →LED (load) →VD3 →R2 →the upper end of L2.
(View)
View full Circuit Diagram | Comments | Reading(4325)
Published:2011/8/9 17:30:00 Author:Vicky | Keyword: Remote Control
Product Specification:
Modulation mode: ASK/OOK (amplitude modulation)
Work voltage: DC 12V (27A/12V Battery)
Work current: 10mA
Work frequency: 315;433MHZ;(stable frequency for audiometer)
Transmission range: >200M (in spacious area, the sensibility of the receptor is above -100dbm)
Coding type: fixed/scroll/learning code
Key button: alternative between key 2 and key 4
Color of appearance: black
Coding types: coder and decoder: PT2260/PT2262 (pad); learning code: eV1527/PT2240B/scroll code: HCS101/HCS301
Product features:
Cheap; small size of the handle of emitter; exquisite appearance; power-saving; stable work performance; black appearance; settable rubber mat number. (View)
View full Circuit Diagram | Comments | Reading(695)
Published:2011/8/9 17:31:00 Author:Vicky | Keyword: ASK/OOK Emitter module
The module is composed by 315MHz or 433.92MHz audiometer oscillator. It belongs to ASK modulation emitter. It can be matched with frequently-used super-regenerative receiving circuit and superheterodyne receiving circuit. The frequency-stability is relatively high. It can be connected with coding chips and data transmission end in the outer side. It only consumes current when the button is pressed down, otherwise it consumes no current. It is easy to use.
Product specification
Communication mode: ASK amplitude modulation
Working frequency: 315MHZ~433.92MHZ
Static current: ≤0.1UA
Emitting current: 10mA
Working voltage: DC 3~12V
Working temperature: -20℃~+60℃
Size of appearance: 11x16x5.5MM
Frequency Stability: ±75KHZ
Emitting Power: 15dbm
Emitting distance: 500m (in the open space)
Emitting rate: 3KB/SInput signal: TTL electrical level (View)
View full Circuit Diagram | Comments | Reading(844)
Published:2011/8/9 17:33:00 Author:Vicky | Keyword: Superheterodyne Receiving Module
The module uses crystal frequency stabilization technology. It has relatively high frequency stability and uses SYN400R as the superheterodyne receptor. The receiving sensitiveness is high, the performance is stable, the current is low, the usage is easy, the size is small and it is cheap. The short antenna can be connected in the outside so that it is convenient to use. It can transmit direct current to the 2500BPS signal.
Product specification
Working voltage: DC 2.7~5.5V
Transmission rate: 2~4KBPS
Working mode: ASK amplitude modulation
Working current: 5MA
Receiving sensitiveness: -105dBm
Size of appearance: 43×12×5mm
Working temperature: -40℃~+85℃
Working frequency: 315 MHz;433 MHz;
Output frequency stability: ±30PBM
Output signal: CMOS electrical level
Ranking of pins: GND、DATA、DATA、+5V 、 +5V、GND、GND、ANT
Function of pins: GND: ground connection DATA: receiving data outputDATA: receiving data output+5V : working power,DC 5V ; +5V : working power,DC 5V ; GND: ground connectionGND: ground connection ANT: antenna
(View)
View full Circuit Diagram | Comments | Reading(641)
Published:2011/8/9 17:35:00 Author:Vicky | Keyword: Superheterodyne receiving module
The module uses crystal frequency stabilization technology. It has relatively high frequency stability and uses SYN400R as the superheterodyne receptor. The receiving sensitiveness is high, the performance is stable, the current is low, the usage is easy, the size is small and it is cheap. The short antenna can be connected in the outside so that it is convenient to use. It can transmit direct current to the 2500BPS signal.
Product specification
Working voltage: DC 2.7~5.5V
Transmission rate: 2~4KBPS
Working mode: ASK amplitude modulation
Working current: 2MA
Receiving sensitiveness: -99dBm
Size of appearance: 30×11×5mm
Working temperature: -40℃~+85℃
Working frequency: 315 MHz;433 MHz;
Output frequency stability: ±30PBM
Output signal: CMOS electrical level
Ranking of pins: ANT、 +5V、SHUT、DATA、GND
Function of pins: ANT: antenna
+5V : working power DC 5V ; SHUT: power-saving module; DATA: receiving data output VSS: ground connection
(View)
View full Circuit Diagram | Comments | Reading(649)
Published:2011/8/9 17:36:00 Author:Vicky | Keyword: Superheterodyne receiving module
The module uses crystal frequency stabilization technology. It has relatively high frequency stability and uses RXB5 as the superheterodyne receptor. The receiving sensitiveness is high, the performance is stable, the current is low, the usage is easy, the size is small and it is cheap. The short antenna can be connected in the outside so that it is convenient to use. It can transmit direct current to the 9600BPS signal.
Product specification
Working voltage: DC 2.7~5.5V
Transmission rate: 0KBPS~9.6KBPS
Working mode: ASK amplitude modulation
Working current: 6mA
Receiving sensitiveness: -102dBm
Size of appearance: 30×11×5mm
Working temperature: -20℃~+70℃
Working frequency: 315 MHz; 433 MHz;
Output signal: CMOS electrical level
Ranking of pins: ANT、 GND、GND、DATA、VDD
Function of pins: ANT: antenna
GND: ground connectionGND: ground connectionDATA: receiving data output, and presenting high-resistance state when there is no signalVDD : working power
(View)
View full Circuit Diagram | Comments | Reading(696)
Published:2011/8/9 17:39:00 Author:Vicky | Keyword: Superheterodyne receiving module
This RF wireless high-frequency receiving module, RXB6, is of high sensitiveness, which reaches -110dBm. It adopts ASK receiving mode, which is available for remote control, far- end control, remote control vehicle, data transmission, anti-theft alarm, home appliance control, wireless toy, vehicle-burglar alarm, wireless backup radar, remote garage gate control , remote motor-driven curtain, flexible door , remote strobe control. It is also an ideal choice GSM/GPS vehicular system set, industry control and systems of high complicated environmental requirement. It can take the place of infrared receptor. It can receive signals from omnidirectional direction and is easy to be added to general remote controls.
Key Feature:
315/433.92/868/914.5MH receiving module
Built-in AGC
Low working voltage: 3.0V~5.5V
Low current: 315MHZ/433.92MHZ(it is available to be connected to power-saving mode in the outside and the start-up time is 250µs; the low-current shutdown mode is 30mA, which effectively saves power)
High sensitiveness: -110dBm
Working temperature: -40℃~+85℃
Size of the appearance: 43.2×12.3×5mm (View)
View full Circuit Diagram | Comments | Reading(1560)
Published:2011/8/9 17:40:00 Author:Vicky | Keyword: Superheterodyne Receiving Module
This RF wireless high-frequency receiving module, RXB10, is of high sensitiveness, which reaches -107dBm. The size is very small. It adopts ASK receiving mode, which is available for remote control, far- end control, remote control vehicle, data transmission, anti-theft alarm, home appliance control, wireless toy, vehicle-burglar alarm, wireless backup radar, remote garage gate control , remote motor-driven curtain, flexible door , remote strobe control. It is also an ideal choice GSM/GPS vehicular system set, industry control and systems of high complicated environmental requirement. It can take the place of infrared receptor. It can receive signals from omnidirectional direction and is easy to be added to general remote controls.
Key Feature:
Low-price 315/433.92/ receiving module
Built-in AGC
Low working voltage: 3.0V~5.5V
Low current: 5.7mA
High sensitiveness: -107dBm
Working temperature: -20℃~+85℃
Size of the appearance: 33×11×5mm (View)
View full Circuit Diagram | Comments | Reading(487)
Published:2011/8/9 17:42:00 Author:Vicky | Keyword: Superheterodyne Receiving Module
This RF wireless high-frequency receiving module, RXB11, is of high sensitiveness, which reaches -107dBm. It adopts ASK receiving mode, which is available for remote control, far- end control, remote control vehicle, data transmission, anti-theft alarm, home appliance control, wireless toy, vehicle-burglar alarm, wireless backup radar, remote garage gate control , remote motor-driven curtain, flexible door , remote strobe control. It is also an ideal choice GSM/GPS vehicular system set, industry control and systems of high complicated environmental requirement. It can take the place of infrared receptor. It can receive signals from omnidirectional direction and is easy to be added to general remote controls.
Key Feature:
Low-price 315/433.92/ receiving module
Built-in AGC
Low working voltage: 3.0V~5.5V
Low current: 5.7mA
High sensitiveness: -112dBm
Working temperature: -20℃~+85℃
Size of the appearance: 43.2×12.3×5mm
(View)
View full Circuit Diagram | Comments | Reading(875)
Published:2011/8/9 17:43:00 Author:Vicky | Keyword: ASK/OOK Small-size Receiving Module
This RF wireless high-frequency receiving module, RXB14, is of high sensitiveness, which reaches -107dBm.The size is very small. It adopts ASK receiving mode, which is available for remote control, far- end control, remote control vehicle, data transmission, anti-theft alarm, home appliance control, wireless toy, vehicle-burglar alarm, wireless backup radar, remote garage gate control , remote motor-driven curtain, flexible door , remote strobe control. It is also an ideal choice GSM/GPS vehicular system set , industry control and systems of high complicated environmental requirement. It can take the place of infrared receptor. It can receive signals from omnidirectional direction and is easy to be added to general remote controls.
Key Feature:
Low-price 315/433.92/ receiving module
Built-in AGC
Low working voltage: 3.0V~5.5V
Low current: 5.7mA
High sensitiveness: -112dBm
Working temperature: -20℃~+85℃
Size of the appearance: 12×10.5×5mm
(View)
View full Circuit Diagram | Comments | Reading(937)
Published:2011/8/9 17:45:00 Author:Vicky | Keyword: FSK/FM Receiving Module
Specification:
Frequency: 433.92/868MHZ
Working Voltage: 5V
Current dissipation: 7mA
Sensitiveness: -108dBm
Modulation mode: FSK
Applied fields: automotive-electronics, industrial control, and vehicular remote control etc. (View)
View full Circuit Diagram | Comments | Reading(931)
Pages:26/164 At 202122232425262728293031323334353637383940Under 20 |