Published:2011/8/9 17:35:00 Author:Vicky | Keyword: Superheterodyne receiving module | From:SeekIC
The module uses crystal frequency stabilization technology. It has relatively high frequency stability and uses SYN400R as the superheterodyne receptor. The receiving sensitiveness is high, the performance is stable, the current is low, the usage is easy, the size is small and it is cheap. The short antenna can be connected in the outside so that it is convenient to use. It can transmit direct current to the 2500BPS signal.
Product specification
Working voltage: DC 2.7~5.5V
Transmission rate: 2~4KBPS
Working mode: ASK amplitude modulation
Working current: 2MA
Receiving sensitiveness: -99dBm
Size of appearance: 30×11×5mm
Working temperature: -40℃~+85℃
Working frequency: 315 MHz;433 MHz;
Output frequency stability: ±30PBM
Output signal: CMOS electrical level
Ranking of pins: ANT、 +5V、SHUT、DATA、GND
Function of pins: ANT: antenna
+5V : working power DC 5V ; SHUT: power-saving module; DATA: receiving data output VSS: ground connection
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Automotive_Circuit/Superheterodyne_receiving_module_RXB3.html
Print this Page | Comments | Reading(3)
Code: