IC Blog Center

Logic Probe Adopts Two Comparators

Published:2011/8/25 5:25:00 Author:Amy

Measurement instruments should not affect the circuits. For instance, a logic probe must suitably detect logic levels, and it should not put undue loads on the test circuit. The logic probe must set thresholds on automatically checking logic levels, relying on the supply voltages of the ICs it is checking. The previous logic probe has loading problems (Reference 1). Its thresholds do not adequately depend o...   (View)

View full text | Comments | Reading(2388)

The description of GPS simulator

Published:2011/8/25 3:18:00 Author:Li xiao na

The Aspen Electronic has more than three decades’ of history, which was estabilished in 1974. It is a specialist distributor of state of the art test equipment and electronic components. In the chosen fields, it has the sales team with great experience. It uses a ‘consultative’ sales approach in dealing with our customer requirements. The key to offer its customers with the products they need it to exchange...   (View)

View full text | Comments | Reading(324)

The latest USB 3.0

Published:2011/8/25 2:41:00 Author:Phyllis

Nowadays we can rarely find a PS/2 keyboard or mouse on a laptop as more and more people use flexible USB keyboards and mice. USB has successfully created its own market space by replacing PS/2, UART and parallel port. Besides in consumer electronics devices, USB is also used in image sensing applications like cameras, biometric ...   (View)

View full text | Comments | Reading(290)

University Students Became the winners of Optical Design Competition

Published:2011/8/25 2:15:00 Author:Amy

Bin Ma and Dustin Moore, students of Rochester University, have won the 2011 Robert S Hilbert Memorial Optical Design Competition on Tuesday, August 23 Ma is a PhD candidate. He was recognized for his work on aspheric lens design by taking CODE V in his paper which titled as “Design of Lithographic Lenses with Slope Constrained Q...   (View)

View full text | Comments | Reading(347)

The measurement instrumentation for digital radio

Published:2011/8/25 2:10:00 Author:Li xiao na

The single portable box is produced by IZT and Enkom. They cooperate together for the digital broadcast coverage analysis. This device is able to analyze the UKW FM, HD Radio, DRM/DRM+, DAB/DAB+/DMB, ATSC, DVB-H/DVB-T, DVB-T2 and Tetrapol networks. The R3301 is used to connect with the receiver and RF recorder, and an Enkom measureme...   (View)

View full text | Comments | Reading(252)

The Water tolerant capacitive touch sensors

Published:2011/8/25 2:08:00 Author:Phyllis

Capacitive touch sensors are commonly used in MP3 players and mobile phones. New design challenges are encountered as this technology is applied to other product categories. One of them is the operation in a wet environment such as in the dishwasher. Water tolerance is a reasonable and cost effective solution for operation in ...   (View)

View full text | Comments | Reading(551)

The First 3:1 High Speed USB Switch

Published:2011/8/25 1:37:00 Author:Phyllis

The recent NCN1188 of ON Semiconductor Corporation is supposed to be the industry’s first 3:1 high speed USB switch is capable of supporting the new Mobile High Definition Link interface standard for digital audio and High Definition video. (View)

View full text | Comments | Reading(315)

TaiyoYuden Released New 4mm Square Wire-Wound Power Inductors

Published:2011/8/25 1:35:00 Author:Amy

TAIYO YUDEN CO., LTD., engaged in circuit modules, dielectric component and engage device design and production, announced three new 4mm square wire-wound power inductors, the NRS4010 (4.0x4.0x1.0mm), the NRS4012 (4.0x4.0x1.2mm) and the NRS4018 (4.0x.4.0x1.8mm) with maximum thickness represented. With an inductance value of 2.2µH...   (View)

View full text | Comments | Reading(317)

The RMS-to-DC Converter

Published:2011/8/25 0:59:00 Author:Phyllis

The RMS-to-DC converter released by Analog Devices Inc. recently offers a usable dynamic range of 100μV to 3V and the ability to measure extremely low signal levels with high accuracy and no drop in settling time. RMS is an important measure for AC signal. RMS-to-DC (View)

View full text | Comments | Reading(297)

ARM will be Applied by Intel x86 Home Turf

Published:2011/8/24 22:47:00 Author:Li xiao na

The Arizona analyst IC Insights declares that the ARM will be applied by x86 MPU home turf. The application will bring pressure to the personal computer, desktop system and servers. “The spread of ARM-based processors threatens to go beyond tablet computers and invade the x86 MPU turf in mainstream home PCs, desktop systems, and even network servers,” says Bill McLean, CEO of IC Insights. “The steep takeoff of touc...   (View)

View full text | Comments | Reading(260)

Vishay Released New Power Metal Strip Resistors in 2726 and 4026 Case Sized

Published:2011/8/24 22:42:00 Author:Amy

Vishay Intertechnology, Inc. (NYSE: VSH), a world leading designer and manufacturer of standard high performance integrated circuits, released two new surface-mount Power Metal Strip resistors in the 2726 and 4026 case sizes in Aug. 25, 2011. With high power ratings from 5 W to 7 W and extremely low resistance values of 0.5 mΩ, the ...   (View)

View full text | Comments | Reading(186)

Apple brings pressure to the rivals

Published:2011/8/24 21:41:00 Author:Li xiao na

According to the predication of HIS iSuppli, the 44.2m of ipad’s shipment will bring challenges to its rivals. The price of HP touchpad has been decreased from $500 to below $100 in seven weeks. What is more, it is restricted to Germany wide. All this has given a good opportunity for the iPad2 production. “All the momentum in the media tablet market is with Apple right now,” says IHS’ Rhoda Alexander, “the...   (View)

View full text | Comments | Reading(602)

Part 1: PCB design basics 4

Published:2011/8/24 2:25:00 Author:Amy

Karol Walraven Wrapping up Continue by placing the com­ponents in their final location (Figure 5). If you ore short of space, check if the following tricks are of any help: -Use SMD components. These are smaller (and therefore belter at higher frequencies) than leaded components and can b...   (View)

View full text | Comments | Reading(1314)

Part 1: PCB design basics 3

Published:2011/8/24 2:19:00 Author:Amy

Karol Walraven Get cracking We’ll now gel lo work, keep­ing the above information in mind. A little bit of searching on the Internet will quickly pro­duce a number of free demo versions of nice printed circuit board layout software. At the end of the article we have included a few links lo get you started. When designing a PCB layout you start with the fixed con­straints. These a...   (View)

View full text | Comments | Reading(772)

Part 1: PCB design basics 2

Published:2011/8/24 2:14:00 Author:Amy

Karol Walraven C12 and C4 are capacitors in the signal path. In this case it is also true that short traces and small area provide less opportunity lo pick up trouble or cause trouble. We repeat the above once more because it is very important that you think about this. How does a signal connection have an area? In figure...   (View)

View full text | Comments | Reading(853)

Part 1: PCB design basics 1

Published:2011/8/24 2:07:00 Author:Amy

Karol Walraven What do most electronics engineers enjoy a lot? Designing printed circuit boards, of course! In an irregular series of articles we would like to familiarize you with this subject. We start as simple as possible and it will become more difficult as we progress. Feedback and requests to cover certain topics are encouraged and welcomed! When you’re just designing a sm...   (View)

View full text | Comments | Reading(1351)

Class-2 Bluetooth RS-232 Adapter

Published:2011/8/24 1:56:00 Author:Phyllis

SMART Modular Technologies, Inc. announced its new Bluetooth 1.1 compliant RS-232 adapter for the industrial, medical, and scientific markets. This RS-232 adapter features an onboard antenna, an embedded configuration utility, and an embedded Bluetooth communications stack complete with the Bluetooth Serial Port Profile. When used in co...   (View)

View full text | Comments | Reading(972)

The New Adjustable Output Non-synchronous Boost Controller

Published:2011/8/24 1:41:00 Author:Phyllis

ON Semiconductor introduced a new adjustable output non-synchronous boost controller for automotive systems. The NCV8871 is a wide input voltage device ranging from 3.2V to 44V, which can be used to drive an external N-channel MOSFET. There’s an internal regulator in the device that charges to the gate driver. When in sleep...   (View)

View full text | Comments | Reading(407)

The DAC8562 D/A Converter

Published:2011/8/24 1:24:00 Author:Phyllis

Texas Instruments Inc., the world leading analog and digital semiconductor IC design and manufacturing company, introduced a dual 16-, 14- and 12-bit digital-to-analog converters (DACs) recently. The DAC8562 family del...   (View)

View full text | Comments | Reading(575)

Temperature switches in SOT packages

Published:2011/8/24 1:17:00 Author:Phyllis

The MAX6509 and MAX6510 made by Maxim are very small temperature switches, which can be configured with a single external resistor to trip at any temperature between -40℃ and + 125℃. The accuracy of the trip point is typically ±0.5℃ and ±4.7℃ maximum. They have a pin that sets the hysteresis to either 2℃ or 10℃. The MAX6509 has an open...   (View)

View full text | Comments | Reading(757)

Pages:47/114 At 204142434445464748495051525354555657585960Under 20