© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The LTC®6401-26 is a high-speed differential amplifi er targeted at processing signals from DC to 140MHz. The part has been specifi cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, ...
Vendor:Other Category:Other
The LTC®6401-14 is a high-speed differential amplifi er targeted at processing signals from DC to 140MHz. The part has been specifi cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, ...
Vendor:Other Category:Other
The LTC®6400-8 is a high-speed differential amplifi er targeted at processing signals from DC to 300MHz. The part has been specifi cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, b...
Vendor:Other Category:Other
The LTC®6400-26 is a high-speed differential amplifi er targeted at processing signals from DC to 300MHz. The part has been specifi cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, ...
Vendor:Other Category:Other
The LTC® 6400-20 is a high-speed differential ampli ertargeted at processing signals from DC to 300MHz. The part has been speci cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but ...
Vendor:Other Category:Other
The LTC®6400-14 is a high-speed differential amplifi er targeted at processing signals from DC to 300MHz. The part has been specifi cally designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, ...
Vendor:Other Category:Other
The LTC® 6241/LTC6242 are dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input bias current. The 0.1Hz to 10Hz noise of only 550nVP-P, along with an offse...
Vendor:Other Category:Other
The LTC6241HVCDD is a dual and quad low noise,low offset,rail-to-rail output,unity gain stable CMOS op amps that feature 1pA of input bias current.The LTC6241HVCDD is available in the 8-pin SO,and for compact designs it ...
Vendor:Other Category:Other
The LTC® 6241/LTC6242 are dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input bias current. The 0.1Hz to 10Hz noise of only 550nVP-P, along with an offse...
Vendor:Other Category:Other
LTC6240IS5 is a kind of single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amp. The device has an output stage that swings within 30 mV of either supply rail to maximize the signa...
Vendor:Other Category:Other
LTC6240HS5 is a kind of single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amp. The device has an output stage that swings within 30 mV of either supply rail to maximize the signa...
Vendor:Other Category:Other
LTC6240CS5 is a kind of single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amp. The device has an output stage that swings within 30 mV of either supply rail to maximize the signa...
Vendor:Other Category:Other
The LTC®6240/6241/LTC6242 are single, dual and quad low noise, low offset, rail-to-rail output, unity gain stable CMOS op amps that feature 1pA of input bias current. Input bias current is guaranteed to be 1pA max on...
Vendor:Other Category:Other
The LTC®6104 is a versatile, high voltage, high side, bidirectional current sense amplifi er. Design fl exibility is provided by the excellent device characteristics: ±450V maximum offset and only 520A of current con...
Vendor:Other Category:Other
The LTC®6102/LTC6102HV are versatile, high voltage, high-side current sense amplifi ers. Their high supply voltage rating allows their use in almost any application,while the low drift and offset ensure accuracy acro...
Vendor:Other Category:Other
The LTC®6102/LTC6102HV are versatile, high voltage, high-side current sense amplifi ers. Their high supply voltage rating allows their use in almost any application,while the low drift and offset ensure accuracy acro...
Mfg:LT D/C:05+ Vendor:Other Category:Other
The LTC® 6101/LTC6101HV are versatile, high voltage, high side current sense amplifiers. Design flexibility is provided by the excellent device characteristics; 300µV Max offset and only 375µA (typical at...
Pack:2008 Vendor:Other Category:Other
The LTC® 6101/LTC6101HV are versatile, high voltage, high side current sense amplifiers. Design flexibility is provided by the excellent device characteristics; 300µV Max offset and only 375µA (typical at...
Vendor:Other Category:Other
The LTC®6087/LTC6088 are dual/quad, low noise, low offset, rail-to-rail input/output, unity-gain stable CMOS operational amplifi ers that feature 1pA of input bias current. A 14MHz gain bandwidth and 7.2V/s slew rate...
Vendor:Other Category:Other
The LTC®6084/LTC6085 are dual/quad, low cost, low offset, rail-to-rail input/output, unity-gain stable CMOS operational ampli ers that feature 1pA of input bias current.A 1.5MHz gain bandwidth, and 0.5V/s slew rate, ...
Vendor:Other Category:Other
The LTC®6084/LTC6085 are dual/quad, low cost, low offset, rail-to-rail input/output, unity-gain stable CMOS operational ampli ers that feature 1pA of input bias current.A 1.5MHz gain bandwidth, and 0.5V/s slew rate, ...
Mfg:LT Pack:DFN-16 Vendor:Other Category:Other
The LTC®6078/LTC6079 are dual/quad, low offset, low noise operational amplifi ers with low power consumption and rail-to-rail input/output swing.Input offset voltage is trimmed to less than 25µV and the C...
Mfg:LT D/C:05+ Vendor:Other Category:Other
The LTC®6078/LTC6079 are dual/quad, low offset, low noise operational amplifi ers with low power consumption and rail-to-rail input/output swing.Input offset voltage is trimmed to less than 25µV and the C...
Vendor:Other Category:Other
The LTS-540A, LTD-5000, LTC-5000 series are 0.52 inch (13.2mm) height 7-Segment displays. AlGaAs red Bright red , yellow and red orange displays have gray face and white segments. Green displays have gray face and green ...
Vendor:Other Category:Other
The LTC®5536 is an RF power detector for RF applications operating in the 600MHz to 7GHz range. A temperature compensated Schottky diode peak detector and fast comparator are combined in a small ThinSOTTM package. Th...
Vendor:Other Category:Other
The LTC®5535 is an RF power detector for RF applications operating in the 600MHz to 7GHz range. A temperature compensated Schottky diode peak detector and output amplifier are combined in a small ThinSOTTM package. T...
Vendor:Other Category:Other
The LTC®5533 is a dual channel RF power detector for RF applications operating in the 300MHz to 11GHz range. Two independent temperature compensated Schottky diode peak detectors and buffer amplifiers are combined in...
Vendor:Other Category:Other
The LTC5532EDC is designed as one kind of RF power detector for RF applications operating in the 300MHz to 7GHz range.The supply voltage range is optimized for operation from a single lithium-ion cell or 3´ NiMH.Th...
Vendor:Other Category:Other
The LTC®5532 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small ThinSOTTM package. T...
Vendor:Other Category:Other
The LTC®5531 is an RF power detector for RF applications perating in the 300MHz to 7GHz range. A temperature ompensated Schottky diode peak detector and buffer mplifier are combined in a small ThinSOTTM package. The ...
Vendor:Other Category:Other
The LTC5530ES6 is one member of the LTC5530 family.The LTC5530 is an RF power detector for RF applications operating in the 300MHz to 7GHz range.A temperature compensated Schottky diode peak detector and buffer amplifier...
Vendor:Other Category:Other
The LTC®5530 is an RF power detector for RF applications perating in the 300MHz to 7GHz range. A temperature ompensated Schottky diode peak detector and buffer amplifier are combined in a small ThinSOTTM package. Th...
Mfg:LINER Vendor:Other Category:Other
The LTC®5509 is an RF power detector for RF applications operating in the 300MHz to 3GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small SC70 package. The su...
Vendor:Other Category:Other
The LTC®5508 is an RF power detector for RF applications operating in the 300MHz to 7GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small SC70 package. The su...
Vendor:Other Category:Other
The LTC®5507 is an RF power detector for applications operating from 100kHz to 1000MHz. The input frequency range is determined by an external capacitor. A temperature- compensated Schottky diode peak detector and bu...
Mfg:LINEAR Pack:SOT5 D/C:n/a Vendor:Other Category:Other
The LTC®5505-X is an RF power detector for RF applications operating in the 300MHz to 3GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small 5-pin ThinSOT pack...
Vendor:Other Category:Other
The LTC®5505-X is an RF power detector for RF applications operating in the 300MHz to 3GHz range. A temperature compensated Schottky diode peak detector and buffer amplifier are combined in a small 5-pin ThinSOT pack...
Vendor:Other Category:Other
The LTS-540A, LTD-5000, LTC-5000 series are 0.52 inch (13.2mm) height 7-Segment displays. AlGaAs red Bright red , yellow and red orange displays have gray face and white segments. Green displays have gray face and green ...
Vendor:Other Category:Other
The LTC®5100 is a 3.2Gbps VCSEL driver offering anunprecedented level of integration and high speed perfor-mance. The part incorporates a full range of features toensure consistently outstanding eye diagrams. The dat...
Mfg:LINEAR Pack:DIP D/C:1400 Vendor:Other Category:Other
The LTC491 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common mode range (+12V to 7V). It also meets the requirements of RS422.The ...
Mfg:LT Pack:DIP8 Vendor:Other Category:Other
The LTC490 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common-mode range (12V to7V). It also meets the requirements of RS422. The C...
Vendor:Linear Technology Category:Integrated Circuits (ICs)
IC LINE RCVR RS485 QUAD 16-DIPThe LTC489CN is one member of the LTC489 family which is designed as the low power differential bus/line receiver that can be used in level translator and low power RS485/RS422 receivers.
Features of the LTC489CN are:(1...
Mfg:LINEAR Pack:DIP D/C:807 Vendor:Other Category:Other
The LTC®488 and LTC489 are low power differential bus/ line receivers designed for multipoint data transmission standard RS485 applications with extended common mode range (12V to 7V). They also meet the requirement...
Mfg:LT Pack:SMD D/C:03+ Vendor:Other Category:Other
The LTC®488 and LTC489 are low power differential bus/ line receivers designed for multipoint data transmission standard RS485 applications with extended common mode range (12V to 7V). They also meet the requirement...
Mfg:LT Pack:SMD D/C:03+ Vendor:Other Category:Other
The LTC487® is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common-mode range ( 7V to 12V). It also meets RS422 requirements.The CMOS de...
Mfg:LINEAR Pack:SOP D/C:2030 Vendor:Other Category:Other
The LTC486 is a low power differential bus/line driver designed for multipoint data transmission standard RS485 applications with extended common-mode range (12V to 7V). It also meets RS422 requirements.The CMOS design o...
Mfg:LT Pack:DIP8 Vendor:Other Category:Other
The LTC485 is a low power differential bus/line transceiver designed for multipoint data transmission standard RS485 applications with extended common-mode range (12V to 7V). It also meets the requirements of RS422.The ...
Vendor:Other Category:Other
The LTC®4558 provides the power conversion and signal level translation needed for advanced cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The device meets all requirements for 1...
Vendor:Other Category:Other
The LTC®4557 provides power conversion and signal level translation needed for 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The part meets all requirements for 1.8V...
Vendor:Other Category:Other
The LTC®4556 provides all necessary power control, level translation and supervisory functions for a smart card or S.A.M. card interface. The part contains a low noise charge pump** plus LDO for generating VCC power,...
Vendor:Other Category:Other
The LTC®4555 provides power conversion and signal level shifting needed for low voltage 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The part meets all type approva...
Vendor:Other Category:Other
The LTC®4447 is a high frequency gate driver with integrated bootstrap Schottky diode that is designed to drive twoN-Channel MOSFETs in a synchronous DC/DC converter. The powerful rail-to-rail driver capability reduc...
Vendor:Other Category:Other
The LTC®4446 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a DC/DC converter with supply voltages up to 100V. The powerful driver capability reduces switching losses in MOSFETs wit...
Vendor:Other Category:Other
The LTC®4444-5 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a synchronous DC/DC converter with supply voltages up to 100V. The powerful driver capability reduces switching losses ...
Vendor:Other Category:Other
The LTC® 4444 is a high frequency high voltage gate driver that drives two N-channel MOSFETs in a synchronous DC/DC converter with supply voltages up to 100V. The powerful driver capability reduces switching losses i...
Vendor:Other Category:Other
DESCRIPTION The LTC®4443 is a high frequency gate driver with integrated bootstrap Schottky diode designed to drive two N-channel MOSFETs in a synchronous buck DC/DC converter topology. The powerful driver capability...
Vendor:Other Category:Other
DESCRIPTION The LTC®4443 is a high frequency gate driver with integrated bootstrap Schottky diode designed to drive two N-channel MOSFETs in a synchronous buck DC/DC converter topology. The powerful driver capability...
Vendor:Other Category:Other
The LTC®4442 is a high frequency gate driver designed to drive two N-channel MOSFETs in a synchronous buck DC/DC converter topology. The powerful driver capability reduces switching losses in MOSFETs with high gate c...
Vendor:Other Category:Other
The LTC®4442 is a high frequency gate driver designed to drive two N-channel MOSFETs in a synchronous buck DC/DC converter topology. The powerful driver capability reduces switching losses in MOSFETs with high gate c...
Vendor:Other Category:Other
The LTC4441ES8-1 is an N-channel MOSFET gate driver that can supply up to 6A of peak output current. It is designed to operate with a supply voltage of up to 25V and has an adjustable linear regulator for the gate drive....
Vendor:Other Category:Other
The LTC®4441/LTC4441-1 is an N-channel MOSFET gate driver that can supply up to 6A of peak output current. The chip is designed to operate with a supply voltage of up to 25V and has an adjustable linear regulator for...
Vendor:Other Category:Other
The LTC®4441/LTC4441-1 is an N-channel MOSFET gate driver that can supply up to 6A of peak output current. The chip is designed to operate with a supply voltage of up to 25V and has an adjustable linear regulator for...
Vendor:Other Category:Other
The LTC®4440-5 is a high frequency high side N-channel MOSFET gate driver that is designed to operate in applications with VIN voltages up to 60V. The LTC4440-5 can also withstand and continue to function during 80V ...
Vendor:Other Category:Other
The LTC® 4440 is a high frequency high side N-channel MOSFET gate driver that is designed to operate in applica-tions with VIN voltages up to 80V. The LTC4440 can also withstand and continue to function during 100V V...
Vendor:Other Category:Other
The LTC®4414 controls an external P-channel MOSFET to create a near ideal diode function for power switchover. This permits highly efficient OR'ing of multiple power sources for extended battery life and low self- he...
Vendor:Other Category:Other
The LTC®4413-1 and LTC4413-2 each contain two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. The ideal diodes use a 100m P-channel MOSFET to independently con...
Vendor:Other Category:Other
The LTC®4413-1 and LTC4413-2 each contain two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. The ideal diodes use a 100m P-channel MOSFET to independently con...
Vendor:Other Category:Other
The LTC®4413 contains two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. Each ideal diode uses a 100m P-channel MOSFET that independently connects INA to OUTA...
Vendor:Other Category:Other
The LTC®4412HV controls an external P-channel MOSFET to create a near ideal diode function for power switchover or load sharing. This permits highly efficient OR'ing of multiple power sources for extended battery li...
Vendor:Other Category:Other
The LTC®4412 controls an external P-channel MOSFET to create a near ideal diode function for power switchover or load sharing. This permits highly efficient OR'ing of multiple power sources for extended battery life ...
Vendor:Other Category:Other
The LTC®4411 is an ideal diode IC, capable of supplying up to 2.6A from an input voltage between 2.6V and 5.5V. The LTC4411 is housed in a 5-lead 1mm profile SOT-23 package.The LTC4411 contains a 140mΩ P-channe...
Vendor:Other Category:Other
The LTC® 4410 enables simultaneous battery charging and operation of portable USB 1.0 and 2.0 compliant devices while they are connected to a USB port. As the USB periph-eral load increases, the LTC4410 proportionall...
Vendor:Other Category:Other
The LTC4403-1 is designed as multiband RF power controllers for EDGE/TDMA. It has two outputs to control dual TX PA modules with two control inputs. An internal sample and hold circuit enables it to be used with AM modul...
Vendor:Other Category:Other
The LTC®4402-2 is a multiband RF power controller for RF power amplifiers operating in the 300MHz to 2.4GHz range. The LTC4402-2 has two outputs to control dual TX PA modules with two control inputs. An internal samp...
Vendor:Other Category:Other
The LTC®4402-2 is a multiband RF power controller for RF power amplifiers operating in the 300MHz to 2.4GHz range. The LTC4402-2 has two outputs to control dual TX PA modules with two control inputs. An internal samp...
Vendor:Other Category:Other
The LTC®4401-1 is a SOT-23 RF power controller for slow turn-on RF power amplifiers operating in the 800MHz to 2.7GHz range. The loop bandwidth is set at 250kHz to improve frequency stability when controlling slow tu...
Vendor:Other Category:Other
The LTC®4401-1 is a SOT-23 RF power controller for slow turn-on RF power amplifiers operating in the 800MHz to 2.7GHz range. The loop bandwidth is set at 250kHz to improve frequency stability when controlling slow tu...
Vendor:Other Category:Other
The LTC®4400-1 is a SOT-23 RF power controller for fast turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. Examples include the Hitachi PF08109B, PF08122B, PF08123B, PF08107B and RF Micro Devices RF...
Vendor:Other Category:Other
The LTC®4400-1 is a SOT-23 RF power controller for fast turn-on RF power amplifiers operating in the 300MHz to 2.7GHz range. Examples include the Hitachi PF08109B, PF08122B, PF08123B, PF08107B and RF Micro Devices RF...
Vendor:Other Category:Other
The LTC®4400-1 is a SOT-23 RF power controller for fast turn-on RF power amplifiers operating in the 800MHz to 2.7GHz range. Examples include the Hitachi PF08109B, PF08122B, PF08123B, PF08107B and RF Micro Devices RF...
Vendor:Other Category:Other
The LTC®4357 is a positive high voltage ideal diode controller that drives an external N-channel MOSFET to replace a Schottky diode. When used in diode-OR and high current diode applications, the LTC4357 reduces powe...
Vendor:Other Category:Other
The LTC®4355 is a positive voltage ideal diode-OR controller that drives two external N-channel MOSFETs. Forming the diode-OR with N-channel MOSFETs instead of Schottky diodes reduces power consumption, heat dissipat...
Vendor:Other Category:Other
The LTC®4354 is a negative voltage diode-OR controller that drives two external N-channel MOSFETs. It replaces two Schottky diodes and the associated heatsink, saving power and area. The power dissipation is greatly ...
Vendor:Other Category:Other
The LTC®4352 creates a near-ideal diode using an external N-channel MOSFET. It replaces a high power Schottky diode and the associated heat sink, saving power and board area. The ideal diode function permits low loss...
Mfg:LT Pack:QFP D/C:6+ Vendor:Other Category:Other
The LTC 4350 is a load share controller that allows systems to equally load multiple power supplies con-nected in parallel. The output voltage of each supply is adjusted using the SENSE+ input until all currents matchthe...
Vendor:Other Category:Other
The LTC®4311 is a dual I2C active pull-up designed to enhance data transmission speed and reliability for bus loading conditions well beyond the 400pF I2C specifi cation limit. The LTC4311 operates at supply voltages...
Vendor:Other Category:Other
The LTC®4309 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4309 provides bidirectional buffering, keeping the backplane and ca...
Vendor:Other Category:Other
The LTC®4308 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4308 provides bidirectional buffering, keeping the backplane and c...
Vendor:Other Category:Other
The LTC4307-1 is a 2-wire bus buffer that provides capacitance buffering between input and output. The HDMI specifi cation requires that devices have less than 50pF of input capacitance on their DDC bus lines. The ...
Vendor:Other Category:Other
The LTC®4307 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4307 provides bidirectional buffering, keeping the backplane and c...
Vendor:Other Category:Other
The LTC®4306 is a 4-channel, 2-wire bus multiplexer with bus buffers to provide capacitive isolation between the upstream bus and downstream buses. Through software control, the LTC4306 connects the upstream 2-wire...
Vendor:Other Category:Other
The LTC®4305 is a 2-channel, 2-wire bus multiplexer with bus buffers to provide capacitive isolation between the upstream bus and downstream buses. Through software control, the LTC4305 connects the upstream 2-wire b...
Vendor:Other Category:Other
The LTC®4304 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection is made, the LTC4304 provides bidirectional buffering, k...
Vendor:Other Category:Other
The LTC®4303 hot swappable 2-wire Bus Buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection is made, the LTC4303 provides bidirectional buffering, k...
Vendor:Other Category:Other
The LTC®4302-1/LTC4302-2 addressable I2C bus and SMBus compatible bus buffers allow a peripheral board to be inserted and removed from a live backplane without corruption of the bus. The LTC4302-1/LTC4302-2 maintain ...
Vendor:Other Category:Other
The LTC®4302-1/LTC4302-2 addressable I2C bus and SMBus compatible bus buffers allow a peripheral board to be inserted and removed from a live backplane without corruption of the bus. The LTC4302-1/LTC4302-2 maintain ...
Mfg:LT-BHQ D/C:4 Vendor:Linear Technology Category:Integrated Circuits (ICs)
IC BUFFER BUS HOTSWAP 2WR 8MSOPThe LTC4301LIMS8 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, the LTC4301LIMS8 SDAIN and SCLIN pins are compatible with sy...
Vendor:Other Category:Other
The LTC4301LCMS8 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, the LTC4301LCMS8 SDAIN and SCLIN pins are compatible with sy...
Mfg:LINEAR D/C:07+ Vendor:Linear Technology Category:Integrated Circuits (ICs)
IC BUFFER BUS HOTSWAP 2WR 8MSOPThe LTC4301LCMS8 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, the LTC4301LCMS8 SDAIN and SCLIN pins are compatible with sy...
Vendor:Other Category:Other
The LTC4301LCDD8 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, the LTC4301LCDD8 SDAIN and SCLIN pins are compatible with sy...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.