About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index D : DM54LS299,DM54LS283,DM-232,
DM54LS299
Vendor:Other Category:Other
The DM54LS299 is an 8-bit universal shift/storage register with TRI-STATE. outputs. Four modes of operation are possible: hold (store), shift left, shift right and load data. The parallel load inputs and flip-flop output...DM54LS283
Vendor:Other Category:Other
These DM54LS283 full adders perform the addition of two 4-bit binary numbers. The sum (R) outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM54LS283 adders feature ...DM54LS279
Vendor:Other Category:Other
The DM54LS279 consists of four individual and independent Set- Reset Latches with active low inputs Two of the four latch- es have an additonal S input ANDed with the primary S input A low on any S input while the R inpu...DM54LS273
Vendor:Other Category:Other
The DM54LS273 is a high speed 8-bit register, consisting of eight D-type flip-flops with a common Clock and an asynchronous active LOW Master Reset. This DM54LS273 device is supplied in a 20-pin package featuring 0.3 ...DM54LS260
Vendor:Other Category:Other
This DM54LS260 device contains two individual five input gates, each of which perform the logic NOR function.DM54LS258B
Vendor:Other Category:Other
These DM54LS258B Schottky-clamped high-performance multiplexers feature TRI-STATE outputs that can interface directly with data lines of bus-organized systems.With all but one of the common outputs of DM54LS258B disabled...DM54LS257B
Vendor:Other Category:Other
These DM54LS257B Schottky-clamped high-performance multiplexers feature TRI-STATE outputs that can interface directly with data lines of bus-organized systems.With all but one of the common outputs of DM54LS257B disabled...DM54LS253
Vendor:Other Category:Other
Each of these DM54LS253 Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary,on-chip, binary decoding data selection to the AND-OR gates. Separate output control input...DM54LS245
Vendor:Other Category:Other
These DM54LS245 octal bus transceivers are designed for asynchro- nous two-way communication between data buses Thecontrol function implementation minimizes external timing requirementsThe DM54LS245 device allows data tr...DM54LS241
Vendor:Other Category:Other
These DM54LS241 buffersline drivers are designed to improve both the performance and PC board density of TRI-STATE buffers drivers employed as memory-address drivers clock drivers and bus-oriented transmittersreceivers F...DM54LS240
Vendor:Other Category:Other
These DM54LS240 buffersline drivers are designed to improve both the performance and PC board density of TRI-STATE buffers drivers employed as memory-address drivers clock drivers and bus-oriented transmittersreceivers F...DM54LS21
Vendor:Other Category:Other
This DM54LS21 device contains two independent gates each of which performs the logic AND functionDM54LS191
Vendor:Other Category:Other
These DM54LS191 circuits are synchronous reversible updown coun-ters The DM54LS191 is a 4-bit binary counter and the DM54LS190 is a BCD counter ynchronous operation is provided by having all flip-flops clocked simultaneo...DM54LS190
Vendor:Other Category:Other
These DM54LS190 circuits are synchronous reversible updown coun-ters The DM54LS191 is a 4-bit binary counter and the DM54LS190 is a BCD counter ynchronous operation is provided by having all flip-flops clocked simultaneo...DM54LS181
Vendor:Other Category:Other
The DM54LS181 is a 4-bit Arithmetic Logic Unit (ALU) which can perform all the possible 16 logic operations on two variables and a variety of arithmetic operationsDM54LS175
Mfg:CDIP Pack:N\A D/C:N\A Vendor:Other Category:Other
These DM54LS175 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM54LS175 have a direct clear input, and the quad (175) versions feature complementary outputs from e...DM54LS174
Vendor:Other Category:Other
These DM54LS174 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM54LS174 have a direct clear input, and the quad (175) versions feature complementary outputs from ea...DM54LS165
Vendor:Other Category:Other
This DM54LS165 device is an 8-bit serial shif tregister which shifts data in the direction of QA toward QH when clocked Parallel-in ac-cess is made available by eight individual direct data inputs which are enabled by ...DM54LS164
Vendor:Other Category:Other
These DM54LS164 8-bit shift registers feature gated serial inputs and an asynchronous clear. A low logic level at either input inhibits entry of the new data, and resets the first flip-flop to the low level at the ne...DM54LS163A
Vendor:Other Category:Other
These DM54LS163A synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The DM54LS163A and DM54LS161A are 4-bit binary counters. The carry output is decoded...DM54LS161A
Vendor:Other Category:Other
These DM54LS161A synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The DM54LS161A and DM54LS163A are 4-bit binary counters. The carry output is decoded...DM54LS158
Vendor:Other Category:Other
These DM54LS158 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sour...DM54LS157
Vendor:Other Category:Other
These DM54LS157 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sour...DM54LS156
Vendor:Other Category:Other
These DM54LS156 TTL circuits feature dual 1-line-to-4-line demultiplexers with individual strobes and common binary-address inputs in a single 16-pin package. When both sections are enabled by the strobes, the common add...DM54LS155
Vendor:Other Category:Other
These DM54LS155 TTL circuits feature dual 1-line-to-4-line demultiplexers with individual strobes and common binary-address inputs in a single 16-pin package. When both sections are enabled by the strobes, the common add...DM54LS154
Vendor:Other Category:Other
Each of these DM54LS154 4-line-to-16-line decoders utilizes TTL circuit-ry to decode four binary-coded inputs into one of sixteen mutually exclusive outputs when both the strobe inputs G1 and G2 are low. The demultiple...DM54LS153
Vendor:Other Category:Other
Each of these DM54LS153 data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs are provided fo...DM54LS151
Vendor:Other Category:Other
This DM54LS151 data selector/multiplexer contains full on-chip decoding to select the desired data source. The DM54LS151 selects one-of-eight data sources. The DM54LS151 has a strobe input which must be at a low logic le...DM54LS139
Vendor:Other Category:Other
These DM54LS139 Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these D...DM54LS138
Vendor:Other Category:Other
These DM54LS138 Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these D...DM54LS125A
Vendor:Other Category:Other
This DM54LS125A device contains four independent gates each of which performs a non-inverting buffer function. The outputsof DM54LS125A have the TRI-STATE feature. When enabled, the outputs of DM54LS125A exhibit the low ...DM54LS11
Vendor:Other Category:Other
This DM54LS11 device contains three independent gates each of which performs the logic AND function.DM54LS109A
Vendor:Other Category:Other
This DM54LS109A device contains two independent positive-edge-triggered J-K flip-flops with complementary outputs. The J and K data is accepted by the flip-flop on the rising edge of the clock pulse. The triggering occur...DM54LS107A
Vendor:Other Category:Other
This DM54LS107A device contains two independent negative-edge-trig-gered J-K flip-flops with complementary outputs. The J and K data is processed by the flip-flops on the falling edge of the clock pulse. The clock trig...DM54LS10
Vendor:Other Category:Other
This DM54LS10 device contains three independent gates each of which performs the logic NAND function.DM54LS08
Vendor:Other Category:Other
This DM54LS08 device contains four independent gates each of which performs the logic AND function.DM54LS04
Vendor:Other Category:Other
This DM54LS04 device contains six independent gates each of which performs the logic INVERT function.DM54LS03
Vendor:Other Category:Other
This DM54LS03 device contains four independent gates each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation.DM54LS02
Vendor:Other Category:Other
This DM54LS02 device contains four independent gates each of which performs the logic NOR function.DM54LS00
Vendor:Other Category:Other
This DM54LS00 device contains four independent gates each of which performs the logic NAND function.DM54L95
Vendor:Other Category:Other
These DM54L95 4-bit registers feature parallel and serial inputs paral-lel output mode control and two clock inputs. The DM54L95 registers have three modes of operation Parallel (broadside) load Shift right (the dire...DM54L93
Vendor:Other Category:Other
Each of these DM54L93 monolithic counters contains four master-slave flip-flops and additional gating to provide a divide-by-two counter and a three-stage binary counter for which the count cycle length is divide-by-ei...DM54L74
Vendor:Other Category:Other
This DM54L74 device contains two independent positive-edge-trig-gered D flip-flops with complementary outputs. The informa-tion on the D input is accepted by the flip-flops on the posi-tive going edge of the clock puls...DM54L73
Vendor:Other Category:Other
This DM54L73 device contains two independent positive pulse trig-gered J-K flip-flops with complementary outputs. The J and K data is processed by the flip-flops after a complete clock pulse While the clock is low the ...DM54L72
Vendor:Other Category:Other
This DM54L72 device contains a positive pulse triggered master-slave J-K flip-flop with complementary outputs Multiple J and K inputs are ANDed together to produce the internal J and K function for the flip-flop. The J...DM54L10
Vendor:Other Category:Other
This DM54L10 device contains three independent gates each of which performs the logic NAND functionDM54L04
Vendor:Other Category:Other
This DM54L04 device contains six independent gates each of which performs the logic INVERT functionDM54L02
Vendor:Other Category:Other
This DM54L02 device contains four independent gates each of which Performs the logic NOR functionDM54L00
Vendor:Other Category:Other
This DM54L00 device contains four independent gates each of which Performs the logic NAND functionDM5490
Vendor:Other Category:Other
Each of these DM5490 monolithic counters contains four master-slave flip-flops and additional gating to provide a divide-by-two counter and a three-stage binary counter for which the count cycle length is divide-by-fiv...DM5486
Vendor:Other Category:Other
This DM5486 device contains four independent gates each of which performs the logic exclusive-OR function.DM5485
Vendor:Other Category:Other
These DM5485 4-bit magnitude comparators perform comparison of straight binary or BCD codes. Three fully-decoded decisions about two 4-bit words (A, B) are made and are externally available at three outputs. These DM5485...DM5476
Vendor:Other Category:Other
This DM5476 device contains two independent positive pulse triggered J-K flip-flops with complementary outputs. The J and K data is processed by the flip-flop after a complete clock pulse. While the clock is low the slav...DM5474
Vendor:Other Category:Other
This DM5474 device contains two independent positive-edge-triggered D flip-flops with complementary outputs. The information on the D input is accepted by the flip-flops on the positive going edge of the clock pulse. The...DM5447A
Vendor:Other Category:Other
The DM5447A and DM5447A feature active-low outputs designed for driving common-anode LEDs or incandescent indicators di-rectly. All of the circuits have full ripple-blanking inputout-put controls and a lamp test input....DM5445
Vendor:Other Category:Other
These DM5445 BCD-to-decimal decodersdrivers consist of eight in-verters and ten four-input NAND gates The inverters are connected in pairs to make DM5445 BCD input data available for decoding by the NAND gates. Full de...DM5442A
Vendor:Other Category:Other
These DM5442A BCD-to-decimal decoders consist of eight inverters and ten, four-input NAND gates. The inverters are connected in pairs to make BCD input data available for decoding by the NAND gates. Full decoding of inpu...DM5437
Vendor:Other Category:Other
This device DM5437 contains four independent gates each of which performs the logic NAND function.DM54367
Vendor:Other Category:Other
This device DM54367 contains six independent gates each of which Performs a non-inverting buffer function The outputs have the TRI-STATE feature When enabled the outputs exhibit the low impedance characteristics of a sta...DM5420
Vendor:Other Category:Other
This device DM5420 contains two independent gates each of which performs the logic NAND function.DM54194
Vendor:Other Category:Other
This DM54194 bidirectional shift register is designed to incorporate virtually all of the features a system designer may want in a shift register it features parallel inputs parallel outputs right-shift and left-shift ...DM54191
Vendor:Other Category:Other
This DM54191 circuit is a synchronous, reversible, up/down counter.The DM54191 is a 4-bit binary counter. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change sim...DM54180
Vendor:Other Category:Other
These DM54180 universal 9-bit (8 data bits plus 1 parity bit) parity generatorscheckers feature oddeven outputs and control inputs to facilitate operation in either odd or even parity ap- plications. Depending on wheth...DM54175
Vendor:Other Category:Other
These DM54175 positive-edge triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM54175 have a direct clear input, and the quad (175) version features complementary outputs from each fli...DM54174
Vendor:Other Category:Other
These DM54174 positive-edge triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM54174 have a direct clear input, and the quad (175) version features complementary outputs from each fli...DM54173
Vendor:Other Category:Other
These DM54173 four-bit registers contain D-type flip-flops with totempole TRI-STATE outputs, capable of driving highly capacitive or low-impedance loads. The high-impedance state and increased high-logic-level drive pr...DM5417
Vendor:Other Category:Other
DM5417 contains six independent gates each of which performs a buffer function The open-collector outputs re-quire external pull-up resistors for proper logical operationDM54161
Vendor:Other Category:Other
These DM54161and DM54163 synchronous presettable counters feature an inter-nal carry look-ahead for application in high-speed counting designs The DM54161and DM54163 are 4-bit binary counters The carry output is deco...DM54157
Mfg:NSC D/C:2002 Vendor:Other Category:Other
These DM54157 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four outputgates. A separate strobe input is provided. A 4-bit word is selected from one of two sourc...DM54155
Vendor:Other Category:Other
These DM54155 TTL circuits feature dual 1-line-to-4-line demultiplexers with individual strobes and common binary-address inputs in a single 16-pin package. When both sections are enabled by the strobes, the common add...DM54154
Vendor:Other Category:Other
DM54154: Each or these 4-line-to-16-line decoders utilizes TTL circuitry to decode four binary-coded inputs into one of sixteen mutually exclusive outputs when both the strobe inputs, G1 and G2, are low. The demultiplex...DM54153
Vendor:Other Category:Other
Each of these data selectors/multiplexers (DM54153) contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs are provided ...DM54151A
Vendor:Other Category:Other
These data selectors/multiplexers contain full on-chip decoding to select the desired data source. The 150 selects one-of-sixteen data sources; the DM54151A selects one-of-eight data sources. The 150 and DM54151A have a ...DM54150
Mfg:NS Pack:DIP D/C:N/A Vendor:Other Category:Other
These data selectors/multiplexers (DM54150) contain full on-chip decoding to select the desired data source. The DM54150 selects one-of-sixteen data sources; the 151A selects one-of-eight data sources. The DM54150 and 15...DM5414
Vendor:Other Category:Other
DM5414 contains six independent gates each of which Performs the logic INVERT function. Each input has hyster-esis which increases the noise immunity and transforms a Slowly changing input signal to a fast changing jitte...DM54132
Vendor:Other Category:Other
DM54132 contains four independent gates each of which performs the logic NAND function .Each input has hystere-sis which increases the noise immunity and transforms a slowly changing input signal to a fast changing jit...DM54125
Vendor:Other Category:Other
DM54125 contains four independent gates each of which performs a non-inverting buffer function The outputs of DM54125 have the TRI-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a s...DM54123
Mfg:1200 Vendor:Other Category:Other
The DM54123 is a dual retriggerable monostable multivibrator capable of generating output pulses from a few nano-sec-onds to extremely long duration up to 100% duty cycle Each device has three inputs permitting the choic...DM54121
Vendor:Other Category:Other
The DM54/74121 is a monostable multivibrator featuring both positive and negative edge triggering with complementary outputs. An internal 2kX timing resistor is provided for design convenience minimizing component coun...DM5410
Vendor:Other Category:Other
DM5410 contains three independent gates each of which performs the logic NAND function.DM5408
Vendor:Other Category:Other
DM5408 contains four independent gates each of which performs the logic AND functionDM5407
Vendor:Other Category:Other
DM5407 contains six independent gates each of which performs a buffer function The open-collector outputs re-quire external pull-up resistors for proper logical operationDM5406
Pack:DIP14 Vendor:Other Category:Other
DM5406 contains six independent buffers each of which performs the logic INVERT function The open-collector out-puts require external pull-up resistors for proper logical op-erationDM5405
Vendor:Other Category:Other
DM5405 contains six independent gates each of which performs the logic INVERT function The open-collector out- puts require external pull-up resistors for proper logical op-erationDM5404
Vendor:Other Category:Other
DM5404 contains six independent gates each of which performs the logic INVERT functionDM5403
Vendor:Other Category:Other
DM5403 contains four independent gates each of which Performs the logic NAND function The open-collector out-puts require external pull-up resistors for proper logical op-erationDM5402
Vendor:Other Category:Other
DM5402 contains four independent gates each of which performs the logic NOR functionDM5401
Vendor:Other Category:Other
DM5401 contains four independent gates each of which Performs the logic NAND function The open-collector out-puts require external pull-up resistors for proper logical op-erationDM5400
Vendor:Other Category:Other
DM5400 contains four independent gates each of which performs the logic NAND function.DM413
Mfg:SITI Pack:SSOP16 D/C:04+ Vendor:Other Category:Other
DM413 is a PWM enabled LED driver specifically designed for LED lighting or display applications. DM413 incorporates shift registers, data latches, 3-channel constant current circuitry with current value set by 3 externa...DM3D
Vendor:Other Category:Other
DM3D:microSD card connectors (Push-pull type)DM3C
Vendor:Other Category:Other
DM3C:microSD card connectors (Hinge type)DM3B
Vendor:Other Category:Other
DM3B:microSD card connectors (Bottom mount type)DM3AT
Vendor:Other Category:Other
DM3AT:microSD card connectors (Push-push type)DM336P
Vendor:Other Category:Other
The DM336P integrated modem is a four chipset design that provides a complete solution for state-of-the-art, voice-band Plain Old Telephone Service (POTS) communication. The modem provides for Data (up to 33,600bps), F...DM2504
Vendor:Other Category:Other
The DM2502 DM2503 and DM2504 are 8-bit and 12-bit TTL registers designed for use in successive approximation AD converters These devices contain all the logic and control circuits necessary in combination with a DA con...DM2503
Vendor:Other Category:Other
The DM2502 DM2503 and DM2504 are 8-bit and 12-bit TTL registers designed for use in successive approximation AD converters These devices contain all the logic and control circuits necessary in combination with a DA con...DM2502
Vendor:Other Category:Other
The DM2502 DM2503 and DM2504 are 8-bit and 12-bit TTL registers designed for use in successive approximation AD converters These devices contain all the logic and control circuits necessary in combination with a DA con...DM2382
Vendor:Other Category:Other
The DM2382 integrates the bq2018 gas gauge peripheral and the UCC3952 single-cell Li-Ion protection device into a complete solution for battery-pack integration.DM-232
Vendor:Other Category:Other
DM-232:a magnetic sensor using magnetoresist-ance effect is composed of ferromagnetic material deposited by evaporation on a silicon substrate. DM-232 is suitable for angle of rotation detection.