Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The L9950 is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five highside drivers. The integrated standard serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance).
All diagnostic informations are available via SPI.
L9950 Maximum Ratings
Symbol
Parameter
Value
Unit
VS
DC supply voltage
-0.3 to28
V
single pulse tmax < 400 ms
40
V
VCC
stabilized supply voltage, logic supply
-0.3 to 5.5
V
VDI VDO VCLK VCSN, Vpwm1
digital input / output voltage
-0.3 to VCC + 0.3
V
VCM
current monitor output
-0.3 to VCC + 0.3
V
VCP
charge pump output
-25 to VS + 11
V
IOUT1,2,3,6,7,8,9,10
output current
±5
A
IOUT4,5,11
output current
±10
A
Note All maximum ratings are absolute ratings. Leaving the limitation of any of these values may cause an irreversible damage of the integrated circuit !
L9950 Features
` One full bridge for 6A load (ron = 150m ) ` Two half bridges for 3A load (ron = 300m ) ` Two half bridges for 1.5A load (ron = 800m ) ` One highside driver for 6A load (ron = 100m ) ` Four highside drivers for 1.5A load (ron = 800 m ) ` Programmable Softstart function to drive loads with higher inrush currents (i.e. current >6A,>3A,>1.5A) ` Very low current consumption in standby mode IS < 6A, typ. Tj 85 °C) ` All outputs short circuit protected ` Current monitor output for 300m ,150m and 100m highside drivers ` All outputs over temperature protected ` Open load diagnostic for all outputs ` Overload diagnostic for all outputs ` Seperated half bridges for door lock motor ` PWM control of all outputs ` Charge Pump output for reverse polarity protection
L9950 Typical Application
Door Actuator Driver with bridges for door lock and safe lock, mirror axis control, mirror fold and highside driver for mirror defroster and four 5W-light bulbs.
L9950 Connection Diagram
L9950TR Parameters
Technical/Catalog Information
L9950TR
Vendor
STMicroelectronics
Category
Integrated Circuits (ICs)
Applications
Automotive
Current - Supply
7mA
Voltage - Supply
7 V ~ 28 V
Package / Case
PowerSO-36 Exposed Bottom Pad
Packaging
Tape & Reel (TR)
Operating Temperature
-40°C ~ 150°C
Drawing Number
*
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
L9950TR L9950TR
L9950TR General Description
The L9950 is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five highside drivers. The integrated standard serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance).
All diagnostic informations are available via SPI.
L9950TR Maximum Ratings
Symbol
Parameter
Value
Unit
VS
DC supply voltage
-0.3 to28
V
single pulse tmax < 400 ms
40
V
VCC
stabilized supply voltage, logic supply
-0.3 to 5.5
V
VDI VDO VCLK VCSN, Vpwm1
digital input / output voltage
-0.3 to VCC + 0.3
V
VCM
current monitor output
-0.3 to VCC + 0.3
V
VCP
charge pump output
-25 to VS + 11
V
IOUT1,2,3,6,7,8,9,10
output current
±5
A
IOUT4,5,11
output current
±10
A
Note All maximum ratings are absolute ratings. Leaving the limitation of any of these values may cause an irreversible damage of the integrated circuit !
L9950TR Features
` One full bridge for 6A load (ron = 150m ) ` Two half bridges for 3A load (ron = 300m ) ` Two half bridges for 1.5A load (ron = 800m ) ` One highside driver for 6A load (ron = 100m ) ` Four highside drivers for 1.5A load (ron = 800 m ) ` Programmable Softstart function to drive loads with higher inrush currents (i.e. current >6A,>3A,>1.5A) ` Very low current consumption in standby mode IS < 6A, typ. Tj 85 °C) ` All outputs short circuit protected ` Current monitor output for 300m ,150m and 100m highside drivers ` All outputs over temperature protected ` Open load diagnostic for all outputs ` Overload diagnostic for all outputs ` Seperated half bridges for door lock motor ` PWM control of all outputs ` Charge Pump output for reverse polarity protection
L9950TR Typical Application
Door Actuator Driver with bridges for door lock and safe lock, mirror axis control, mirror fold and highside driver for mirror defroster and four 5W-light bulbs.