© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The D1861B direct-modulated laser (DML) module is a cost-effective solution for 10 Gbits/s digital transmission up to 12 km using traditional intracity SMF-28 † single-mode fiber links. The 1310 nm wavelength elimi...
Vendor:Other Category:Other
The D1861A direct-modulated laser (DML) module is a cost-effective solution for 10 Gbits/s digital transmission up to 50 km using traditional intracity SMF28 single-mode fiber links. The 1310 nm wavelength eliminates the...
Vendor:Other Category:Other
Pack:4P Vendor:Other Category:Other
The D171-Type Photodetector consists of a PIN coupled to a multimode fiber pigail. The D171-Type is available in a 4-pin mini-DIL configuration (see Figure 3 and/or Table 1) and is ideal for long-reach (SONET) and othe...
Vendor:Other Category:Other
Mfg:MSC Pack:DIP-16P D/C:99+ Vendor:Other Category:Other
D/C:01+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The D15XB60 is designed as the schottky dual differential line receiver that has been specifically designed to satisfy the requirements of EIA Standards RS-422 and RS-423.The D15XB60 is suitable for use as a line receive...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The HFCT-5215 transceiver is a high performance, cost effective module for serial optical data communications applications specified for a signal rate of 155 MBd. The HFCT-5215 is designed to provide a SONET/SDH complian...
Vendor:Other Category:Other
The HFCT-5215 transceiver is a high performance, cost effective module for serial optical data communications applications specified for a signal rate of 155 MBd. The HFCT-5215 is designed to provide a SONET/SDH complian...
Vendor:Other Category:Other
The D15557FN is one member of the D15557 family which designed as the planar silicon transistor. The D15557FN has two points of features:high collector-base voltage(VCBO=1500V) and high speed switching. The absolute maxi...
Vendor:Other Category:Other
The notes for D1555 during applicated are 1.for proper mounting an grounding of refer to application note AN-101; 2. For proper output loading of VCO, refer to application note AN-102.
The features of D1555 can be summ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Memory Cards D15, consist of two main parts: the plastic card, and the embedded Micromodule (which, in turn, carries the silicon chip). The plastic card D15, is made of PVC, ABS or similar material, and can be over-prin...
Mfg:JLI Pack:TO-220 D/C:09+ Vendor:Other Category:Other
3DD13009K is NPN bipolar type high power transistor, the process technology which is adopted in manufacturing mainly include high voltage flat process technology, triple diffusion technique, and 3DD13009K also uses the h...
Mfg:JI.L Pack:TO-220 D/C:09+ Vendor:Other Category:Other
3DD13007K is NPN bipolar type high power transistor, the process technology which is adopted in manufacturing mainly include high voltage flat process technology, triple diffusion technique, and 3DD13007K also uses the h...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1260UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1218UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1217UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of theD1212UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEMELAB Pack:(LX)high-frequency Vendor:Other Category:Other
The ceramic portion of the D1210UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1209UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Vendor:Other Category:Other
The ceramic portion of the D1208UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1207UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1222UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Pack:(LX)high-frequency Vendor:Other Category:Other
The ceramic portion of the D1203UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1202UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1201UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:PERKINELMER D/C:2006 Vendor:Other Category:Other
The D117212,Photoconductive Cell in clear glass housing with spectral range peak at 720 nm
Vendor:Other Category:Other
The D116013,Photoconductive Cell in clear glass encapsulated housing
Vendor:Other Category:Other
The D116012,Photoconductive Cell in glass encapsulated housing
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ANAREN Pack:N/A D/C:N/A Vendor:Other Category:Other
Vendor:Other Category:Other
The D10AAXXZ4 is high performance Alumina (Al2O3) surface mount attenuator intended as a lower cost alternative to Aluminum Nitride (AlN) and Beryllium Oxide (BeO). The attenuator,the D10AAXXZ4 is well suited to all ce...
Vendor:Other Category:Other
The D10AAXXZ4 is high performance Alumina (Al2O3) surface mount attenuator intended as a lower cost alternative to Aluminum Nitride (AlN) and Beryllium Oxide (BeO). The attenuator, D10AAXXZ4 is well suited to all cellul...
Mfg:SEMELAB Pack:(LX)high-frequency Vendor:Other Category:Other
The ceramic portion of the D1094UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
The ceramic portion of the D1093UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SML Pack:TO-220 D/C:06+ Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SML Pack:00+ D/C:N/A Vendor:Other Category:Other
The ceramic portion of the D1053UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEME-LAB Vendor:Other Category:Other
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1029UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of theD1028UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Vendor:Other Category:Other
The ASI D10-28 is Designed for General Purpose UHF Amplifier Applications up to 1200 MHz.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1027UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
Mfg:SEMELAB Vendor:Other Category:Other
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1023UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1022UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of theD1021UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1020UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of theD1019UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1018UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1017UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1016UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1015UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of theD1014UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:EPCOS D/C:03+ Vendor:Other Category:Other
The ceramic portion of the D1014 between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area. THESE D1014 MUST ...
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1013UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEMELAB Vendor:Other Category:Other
The ceramic portion of the D1012UK between leads and metal flange is beryllium oxide. Beryllium oxide dust is highly toxic and care must be taken during handling and mounting to avoid damage to this area.
Mfg:SEME-LAB Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.