Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
This one-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
TXS0101DBVR Features
` Available in the Texas Instruments NanoFree™ Package ` 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA VCCB) ` VCC Isolation Feature If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State ` Ioff Supports Partial-Power-Down Mode Operation ` Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ` ESD Protection Exceeds JESD 22 A Port 2500-V Human-Body Model (A114-B) abc 200-V Machine Model (A115-A) 1500-V Charged-Device Model (C101) B Port 8-kV Human-Body Model (A114-B) abc 200-V Machine Model (A115-A) 1500-V Charged-Device Model (C101)
This one-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
TXS0101DCKR Features
` Available in the Texas Instruments NanoFree™ Package ` 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA VCCB) ` VCC Isolation Feature If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State ` Ioff Supports Partial-Power-Down Mode Operation ` Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ` ESD Protection Exceeds JESD 22 A Port 2500-V Human-Body Model (A114-B) abc 200-V Machine Model (A115-A) 1500-V Charged-Device Model (C101) B Port 8-kV Human-Body Model (A114-B) abc 200-V Machine Model (A115-A) 1500-V Charged-Device Model (C101)
