Translation - Voltage Levels 2-Bit Bi-Directional Voltage-Level-Trans
TXS0102DCUR: Translation - Voltage Levels 2-Bit Bi-Directional Voltage-Level-Trans
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.29 - .49 / Piece
Translation - Voltage Levels 1B Bidirec Vltg- Lev Translator
US $.15 - .18 / Piece
Translation - Voltage Levels 1B Bidirec Vltg- Lev Translator
Propagation Delay Time : | 260 ns | Supply Voltage - Max : | 3.6 V, 5.5 V | ||
Supply Voltage - Min : | 1.65 V, 2.3 V | Maximum Operating Temperature : | + 85 C | ||
Mounting Style : | SMD/SMT | Package / Case : | US8-8 |
MIN MAX | UNIT | |||
VCCA | Supply voltage range | 0.5 4.6 | V | |
VCCB | 0.5 6.5 | |||
VI Input voltage range | A port | 0.5 4.6 | V | |
B port | 0.5 6.5 | |||
Voltage range applied to any output VO in the high-impedance or power-off state |
A port | 0.5 4.6 | V | |
B port | 0.5 6.5 | |||
VO Voltage range applied to any output in the high or low state | A port | 0.5 VCCA + 0.5 | V | |
B port | 0.5 VCCB + 0.5 | |||
IIK Input clamp current | VI < 0 | 50 | mA | |
IOK Output clamp current | VO < 0 | 50 | mA | |
IO Continuous output current | ±50 | mA | ||
Continuous current through each VCCA, VCCB, or GND | ±100 | mA | ||
QJA Package thermal impedance(4) | DCT package | 220 | °C/W | |
DCU package | 227 | |||
YZP package | 102 | |||
Tstg Storage temperature range | 65 150 | °C |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCCA and VCCB are provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
This two-bit noninverting translator TXS0102DCUR uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Technical/Catalog Information | TXS0102DCUR |
Vendor | Texas Instruments (VA) |
Category | Integrated Circuits (ICs) |
Package / Case | US8, 8-VSSOP |
Packaging | Digi-Reel? |
Input Type | Voltage |
Output Type | Voltage |
Supply Voltage | 1.65 V ~ 5.5 V |
Data Rate | 24Mbs |
Number of Channels | 2 |
Operating Temperature | -40°C ~ 85°C |
Drawing Number | 296; 4200503; DCU; 8 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | TXS0102DCUR TXS0102DCUR 296 21931 6 ND 296219316ND 296-21931-6 |