Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The THS10082 is a CMOS, low-power, 10-bit, 8 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS10082 consists of two analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load offof the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided.
An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In the single conversion mode, a single and simultaneous conversion can be initiated by using the single conversion start signal (CONVST). The conversion clock in the single conversion mode is generated internally using a clock oscillator circuit. In the continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS10082. The internal clock oscillator is switched off in the continuous conversion mode.
The THS10082C is characterized for operation from 0°C to 70°C, and the THS10082I is characterized for operation from 40°C to 85°C.
THS10082 Maximum Ratings
THS10082
Supply voltage range Su ly
DGND to DVDD
0.3 V to 6.5 V
BGND to BVDD
0.3 V to 6.5 V
AGND to AVDD
0.3 V to 6.5 V
Analog input voltage range
AGND 0.3 V to AVDD + 1.5 V
Reference input voltage
0.3 V + AGND to AVDD + 0.3 V
Digital input voltage range
0.3 V to BVDD/DVDD + 0.3 V
Operating virtual junction temperature range, TJ
40°C to 150°C
Operating free air temperature range T free-range, TA
THS10082C
0°C to 70°C
THS10082I
40°C to 85°C
Storage temperature range, Tstg
65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
260°C
THS10082 Features
Simultaneous Sampling of Two Single-Ended Signals or One Differential Signal Integrated 16-Word FIFO Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz Differential Nonlinearity Error: ±1 LSB Integral Nonlinearity Error: ±1 LSB Auto-Scan Mode for Two Inputs 3-V or 5-V Digital Interface Compatible Low Power: 216 mW Max 5-V Analog Single Supply Operation Internal Voltage References . . . 50 PPM/°C and ±5% Accuracy Parallel µC/DSP Interface
THS10082 Typical Application
Radar Applications Communications Control Applications High-Speed DSP Front-End Automotive Applications