SN74ABT32318, SN74ABT32318PN, SN74ABT328 Selling Leads, Datasheet
MFG:TI Package Cooled:TQFP D/C:2005+
SN74ABT32318, SN74ABT32318PN, SN74ABT328 Datasheet download
Part Number: SN74ABT32318
MFG: TI
Package Cooled: TQFP
D/C: 2005+
MFG:TI Package Cooled:TQFP D/C:2005+
SN74ABT32318, SN74ABT32318PN, SN74ABT328 Datasheet download
MFG: TI
Package Cooled: TQFP
D/C: 2005+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: SN74ABT32318
File Size: 148895 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: SN7000
File Size: 81454 KB
Manufacturer: SIEMENS [Siemens Semiconductor Group]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: SN7000
File Size: 81454 KB
Manufacturer: SIEMENS [Siemens Semiconductor Group]
Download : Click here to Download
The 4ABT32318 consists of three 18-bit registered input/output (I/O) ports. These registers combine D-type latches and flip-flops to allow data flow in transparent, latch, and clock modes. Data from one input port can be exchanged to one or more of the other ports. Because of the universal storage element, multiple combinations of real-time and stored data can be exchanged among the three ports.
Data flow in each direction is controlled by the output-enable (OEA, OEB, and OEC), select-control (SELA, SELB, and SELC), latch-enable (LEA, LEB, and LEC), and clock (CLKA, CLKB, and CLKC) inputs. The A data register operates in the transparent mode when LEA is high. When LEA is low, data is latched if CLKA is held at a high or low logic level. If LEA is low, data is stored on the low-to-high transition of CLKA. Output data selection is accomplished by the select-control pins. All three ports have active-low output enables, so when the output-enable input is low, the outputs are active; when the output-enable input is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN54ABT32318 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74ABT32318 is characterized for operation from 40°C to 85°C.