NE082CN, NE1458P, NE1617 Selling Leads, Datasheet
MFG:og stock Package Cooled:DIP8 D/C:og stock
NE082CN, NE1458P, NE1617 Datasheet download
Part Number: NE082CN
MFG: og stock
Package Cooled: DIP8
D/C: og stock
MFG:og stock Package Cooled:DIP8 D/C:og stock
NE082CN, NE1458P, NE1617 Datasheet download
MFG: og stock
Package Cooled: DIP8
D/C: og stock
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: NE021
File Size: 175630 KB
Manufacturer: ETC [ETC]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: NE1617
File Size: 165984 KB
Manufacturer: PHILIPS [Philips Semiconductors]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: NE1617
File Size: 165984 KB
Manufacturer: PHILIPS [Philips Semiconductors]
Download : Click here to Download
The NE1617 is an accurate two-channel temperature monitor. It measures the temperature of itself and the temperature of a remote sensor. The remote sensor is a diode connected transistor. This can be in the form of either a discrete NPN/PNP, such as the 2N3904/2N3906, or a diode connected PNP built into another die, such as is done on some INTEL microprocessors.
The temperature of both the remote and local sensors is stored in a register that can be read via a 2-wire SMBus. The temperatures are updated at a rate that is programmable via the SMBus (the average supply current is dependent upon the update rate-the faster the rate, the higher the current).
In addition to the normal operation, which is to update the temperature at the programmed rate, there is a one shot mode that will force a temperature update.
There is also an alarm that senses either an over or under temperature condition. The trip points for this alarm are also programmable.
The device can have 1 of 9 addresses (determined by 2 address pins), so there can be up to 9 of the NE1617 on the SMBus.
It can also be put in a standby mode (in order to save power). This can be done either with software (over the SMBus) or with hardware (using the STANDBY pin).
PARAMETER | MIN. | MAX. | UNIT |
VDD to GND | 0.3 | +6 | V |
D+, ADD0, ADD1 | 0.3 | VDD+0.3 | V |
D to GND | 0.3 | +0.8 | V |
SCLK, SDATA, ALERT, STBY | 0.3 | +6 | V |
Input current SDATA | 1 | +50 | mA |
D current | ±1 | mA | |
Operating temperature range | 0 | +120 | |
Maximum junction temperature | +150 | ||
Storage temperature range | 65 | +150 |