642-128-1613 28PIN, 6422, 642-2

Total Supply Voltage
42V
Input Voltage
                                                                                (V+ - 1V) to (V-)
Differential Input Current
(Note 2)
                                                                                +10mA
Output Current
(Note 3)
                                                                                Internally Limited
Power Dissipation
(Note 4)
                                                                                500mW
ESD Tolerance
 (C = 100pF, R = 1.5k Ohm)                                     +4kV
Junction Temperature
                                                                                 150 C
Storage Temperature Range
                                                                                 -65 C to +150 C
Lead Temperature
 (Soldering, 10 seconds)                                           300 C
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions.

Note 2: The inputs are shunted with three series-connected diodes back-to-back for input differential clamping.  Therefore differential input voltages greater than about 1.8V will cause excessive current to flow unless limited to less than 10mA.

Note 3: Current limiting protects the output from a short to ground or any voltage less than the supplies.  With a continuous overload, the package dissipation must be taken into account and heat sinking provided when necessary.

Note 4: Devices must be derated using a thermal resistance (Tja) of 90 C/W for the J and 80 C/W for the E package, and Tjc of 12 C/W for both packages.