6422

Type: AC
Color: Black
Style: Standard
Current - Input: 20mA
Features: Hold Down Screw
Voltage - Output: 24 ~ 280VAC (240VAC Nom)
Current - Output: 0.02 ~ 3.5A
Manufacturer: Crydom Co.
Series: 6
Voltage - Input: 5VDC (3.5 ~ 6VDC)
Turn On Time: 1/2 Cycle
Turn Off Time: 1/2 Cycle


Features:

- Low offset voltage     0.2mV
- 0.01% setting time     400nS
- Slew rate Av = -1      140V/uS
- Slew rate Av = +1       75V/uS
- Gain bandwidth          17MHz
- Total supply current    5.5mA
- Output drives 50 Ohm load (+1V)

Application

- D/A converters
- Fast integrators
- Active filters


Specifications

Total Supply Voltage
42V
Input Voltage
                                                                                (V+ - 1V) to (V-)
Differential Input Current
(Note 2)
                                                                                +10mA
Output Current
(Note 3)
                                                                                Internally Limited
Power Dissipation
(Note 4)
                                                                                500mW
ESD Tolerance
 (C = 100pF, R = 1.5k Ohm)                                     +4kV
Junction Temperature
                                                                                 150 C
Storage Temperature Range
                                                                                 -65 C to +150 C
Lead Temperature
 (Soldering, 10 seconds)                                           300 C
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions.

Note 2: The inputs are shunted with three series-connected diodes back-to-back for input differential clamping.  Therefore differential input voltages greater than about 1.8V will cause excessive current to flow unless limited to less than 10mA.

Note 3: Current limiting protects the output from a short to ground or any voltage less than the supplies.  With a continuous overload, the package dissipation must be taken into account and heat sinking provided when necessary.

Note 4: Devices must be derated using a thermal resistance (Tja) of 90 C/W for the J and 80 C/W for the E package, and Tjc of 12 C/W for both packages.

Description

The 6422 is monolithic fast-setting unity-gain-compensated dual operational amplifiers with +20mA output drive capability.  The PNP input stage has a typical bias current of 200nA, and the operating supply voltage is +5V to +20V. 

The dual op amp 6422 uses slew enhancement with special mirror circuitry to achieve fast response and high gain with low total supply current.

The amplifier 6422 is built on a junction-isolated VIP(TM) (Vertically Integrated PNP) process which produces fast PNP's that complement the standard NPN's.

Parameters:

Technical/Catalog Information	6422
Vendor	Crydom
Category	Relays, I/O Modules
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	6422 6422