© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The LMH0071 SDI Deserializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. When paired with a host FPGA the LMH0341 automatically detects the incoming data ra...
Vendor:Other Category:Other
The LMH0070 SDI Serializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. An FPGA Host will format data with supplied IP such that the output of the LMH0340 is...
Vendor:Other Category:Other
The LMH0056 HD/SD SDI Reclocker with 4:1 Input Multiplexer retimes serial digital video data conforming to the SMPTE 292M and SMPTE 259M (A & C) standards. It operates at serial data rates of 143 Mbps, 270Mbps, 1.483...
Vendor:Other Category:Other
The LMH0051 SDI Deserializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. When paired with a host FPGA the LMH0341 automatically detects the incoming data ra...
Vendor:Other Category:Other
The LMH0050 SDI Serializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. An FPGA Host will format data with supplied IP such that the output of the LMH0340 is...
Vendor:Other Category:Other
The LMH0046 is HD/SD SDI Reclocker with Dual Differential Outputs. It operates at serial data rates of 143 Mbps, 270 Mbps, 1.483 Gbps and 1.485 Gbps. The device is powered from a single 3.3V supply and is housed in a 20...
Vendor:Other Category:Other
The LMH0041 SDI Deserializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. When paired with a host FPGA the LMH0341 automatically detects the incoming data ra...
Vendor:Other Category:Other
The LMH0040 SDI Serializers are part of National's family of FPGA-Attach SER/DES products supporting 5-bit LVDS interfaces with FPGAs. An FPGA Host will format data with supplied IP such that the output of the LMH0340 is...
Vendor:Other Category:Other
The LMH0036 is SD SDI Reclocker with 4:1 Input Multiplexer retimes serial digital video data conforming to the SMPTE 259M (C) standard. The device operates at the serial data rate of 270 Mbps, and also supports DVB-ASI o...
Vendor:Other Category:Other
The LMH0034 SMPTE 292M / 259M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates ove...
Vendor:Other Category:Other
The LMH0026 is SD SDI Reclocker with Dual Differential Outputs. It operates at the serial data rate of 270 Mbps and also supports DVB-ASI operation at 270 Mbps. The device is powered from a single 3.3V supply and is hous...
Vendor:Other Category:Other
The LMH0024 is 3.3V SMPTE 259M / 344M Adaptive Cable Equalizer. It operates over a wide range of data rates from 125 Mbps to 540 Mbps and supports SMPTE 259M and SMPTE 344M. The applications of it are:Serial digital data...
Vendor:Other Category:Other
The LMH0002 SMPTE 292M / 259M serial digital cable driver is a monolithic, high-speed cable driver designed for use in SMPTE 292M / 259M serial digital video and ITU-T G.703 serial digital data transmission applications....
Vendor:Other Category:Other
The LMH0001 is SMPTE 259M / 344M Serial Digital Cable Driver. It is is designed for use in SMPTE 259M / 344M serial digital video applications. The LMH0001 drives 75 transmission lines (Belden 8281, Belden 1694A or equ...
Mfg:UNKNOW Pack:10.4 D/C:LCD Vendor:Other Category:Other
Mfg:HITACHI Pack:02+ D/C:LCD Vendor:Other Category:Other
Mfg:HITACHI Pack:01+ D/C:LCD Vendor:Other Category:Other
Mfg:HITACHI Pack:02+ D/C:LCD Vendor:Other Category:Other
Vendor:Other Category:Other
The LMG7401PLBC is produced by HITACHI and it has some features:(1)blue on white STN type;(2)transmissive mode;(3)high brightness CFL backlight;(4)high contrast LC material;(5)built-in LCD controller HD61830B.
The mecha...
Vendor:Other Category:Other
The LMG7400PLFC is produced by HITACHI and it has some features:(1)blue on white STN type;(2)transmissive mode;(3)high brightness CFL backlight;(4)high contrast LC material;(5)built-in LCD controller HD61830B.
The mecha...
Mfg:UNKNOW Pack:4.9 D/C:LCD Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:HITACHI Pack:lcd D/C:1998 Vendor:Other Category:Other
Mfg:UNKNOW Pack:5.3 D/C:LCD Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
LM-FB26Y CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance cos...
Vendor:Other Category:Other
LM-FB26R CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance cos...
Vendor:Other Category:Other
LM-FB26G-12 CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance ...
Vendor:Other Category:Other
LM-FB26G CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance cos...
Vendor:Other Category:Other
LM-FB26B CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance cos...
Vendor:Other Category:Other
LM-FB20F-12 CML IT LED Modules are available in various sizes, shapes and colors and utilize the CML-IT line of high quality LEDs. The features are easy handling, compact construction, long life span and low maintenance ...
Mfg:NS Pack:SOP D/C:07+ Vendor:Other Category:Other
The LMF90 is a fourth-order elliptic notch (band-reject) filter based on switched-capacitor techniques. No external components are needed to define the response function.The depth of the notch is set using a two-level lo...
Mfg:NS Vendor:Other Category:Other
The LMF60 is a high performance, precision, 6th-order Butterworth lowpass active filter. It is fabricated using National's LMCMOS process, an improved silicon-gate CMOS process specifically designed for analog products. ...
Vendor:Other Category:Other
The LMF501 designed for use as a single-chip AM radio. It can be used to configure an AM radio with few external components. It is ideal for use in watch radios, lighter-radios and other applications intended to operate ...
Vendor:Other Category:Other
The LMF380 is a triple, one-third octave filter set designed for use in audio, audiological, and acoustical test and measurement applications. Built using advanced switched-capacitor techniques, the LMF380 contains three...
Vendor:Other Category:Other
The LMF100 consists of two independent general purpose high performance switched capacitor filters. With an external clock and 2 to 4 resistors, various second-order and first-order filtering functions can be realized by...
Vendor:Other Category:Other
LMF Conductive Plastic Motion Transducer Elements, Reduced Bulk, Designed for Easy Integration, High Accuracy, Long Life, Simple and Flexible Mounting, Essentially Infinite Resolution
Vendor:Other Category:Other
The LME49870 is part of the ultra-low distortion, low noise,high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications.
Features of the LME49870 are:(1)eas...
Vendor:Other Category:Other
The LME49860 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge pro...
Vendor:Other Category:Other
The LME49810 is a high fidelity audio power amplifier driver designed for demanding consumer and pro-audio applications. Amplifier output power may be scaled by changing the supply voltage and number of power transistors...
Vendor:Other Category:Other
The LME49740 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge pro...
Vendor:Other Category:Other
The LME49726 is a low distortion, low noise rail-to-rail output audio operational amplifier optimized and fully specified for high performance, high fidelity applications. The LME49726 delivers superior audio signal ampl...
Vendor:Other Category:Other
The LME49725 is part of the ultra-low distortion, low noise,high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications.Combining advanced leading-edge proce...
Vendor:Other Category:Other
The LME49724 is an ultra-low distortion, low noise, high slew rate fully-differential operational amplifier optimized and fully specified for high performance, high fidelity applications.
Features of the LME49724 are:(1...
Vendor:Other Category:Other
The LME49723 is part of the ultra-low distortion, low noise,high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications.Combining advanced leading-edge proce...
Vendor:Other Category:Other
The LME49721 is a low distortion, low noise Rail-to-Rail Input/Output operational amplifier optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge process technolo...
Vendor:Other Category:Other
The LME49713 is an ultra-low distortion, low noise, ultra high slew rate current feedback operational amplifier optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-e...
Vendor:Other Category:Other
The LME49600 is a high performance, low distortion high fidelity 250mA audio buffer. The LME49600 is designed for a wide range of applications. It can be used inside the feedback loop of op amps.
The LME49600 offers a p...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The LME0305D series of DC-DC converters are optimised for low-power operation. Due to the low quiescent current they are able to offer efficiencies up to 75%. The use of advanced magnetics ensures a minimal quiescent cur...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:LRC Pack:SOD-323 D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
LM-DIN232F Bluetooth RS232, DIN Rail Mounting, Female Socket + Male Adapter
Vendor:Other Category:Other
The LMDB3 is a kind of silicon bidirectional trigger diodes. These kind of diacs are intended for use in thyristor phase control, circuits for lamp-dimming, universal-motor speed controls, and heat controls.
The absolut...
Vendor:Other Category:Other
The LMD18400 is a fully protected quad high side driver. It contains four common-drain DMOS N-channel power switches, each capable of switching a continuous 1 Amp load (>3 Amps transient) to a common positive power su...
Vendor:Other Category:Other
The LMD18245 full-bridge power amplifier incorporates all the circuit blocks required to drive and control current in a brushed type DC motor or one phase of a bipolar stepper motor. The multi-technology process used to ...
Vendor:Other Category:Other
The LMD18201 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithi...
Vendor:Other Category:Other
LMD18200T is a kind of 3A H-bridge. It uses a a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. The typical applications include DC and...
Vendor:Other Category:Other
The LMD18200 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithi...
Mfg:NS Pack:DIP D/C:N/A Vendor:Other Category:Other
The LMC835 is a monolithic, digitally-controlled graphic equalizer CMOS LSI for Hi-Fi audio. The LMC835 consists of a Logic section and a Signal Path section made of analog switches and thin-film silicon-chromium resisto...
Vendor:Other Category:Other
The LMC8101 is a Rail-to-Rail Input and Output high performance CMOS operational amplifier. The LMC8101 is ideal for low voltage (2.7V to 10V) applications requiring Rail-to-Rail inputs and output. The LMC8101 is supplie...
Mfg:NS Pack:SOP8 D/C:09+ Vendor:Other Category:Other
The LMC7660 is a CMOS voltage converter capable of converting a positive voltage in the range of +1.5V to +10V to the corresponding negative voltage of −1.5V to −10V. The LMC7660 is a pin-for-pin replacement ...
Mfg:NSC Pack:SO-8 D/C:06+ Vendor:Other Category:Other
The LMC7215/LMC7225 are ultra low power comparators with a maximum of 1 µA power supply current. They are designed to operate over a wide range of supply voltages, from 2V to 8V.
The LMC7215/LMC7225 have a greater...
Vendor:Other Category:Other
The LMC7221BIN is one member of the LMC7221 family which is designed as the tiny CMOS comparator that can be used in (1)battery powered products; (2)notebooks and PDAs; (3)PCMCIA cards; (4)mobile communications; (5)alarm...
Vendor:Other Category:Other
The LMC7221BIM5 is designed as one kind of micropower CMOS comparator device that can be used in (1)Mixed voltage battery powered products; (2)Notebooks and PDAs; (3)PCMCIA cards; (4)Mobile communications; (5)Alarm and s...
Vendor:Other Category:Other
The LMC7221 is a micropower CMOS comparator available in the space saving SOT23-5 package. This makes this comparator ideal for space and weight critical designs. The LMC7221 is also available in the SO-8 package. The LM...
Vendor:Other Category:Other
The LMC7215 is designed as one member of the micro-power, rail-to-rail CMOS comparator that can be used in (1)laptop computers; (2)mobile phones; (3)metering systems; (4)hand-held electronics; (5)RC timers; (6)alarm and ...
Vendor:Other Category:Other
The LMC7211AIN is one member of the LMC7211 family which is designed as the tiny CMOS comparator that can be used in (1)battery powered products; (2)notebooks and PDAs; (3)PCMCIA cards; (4)mobile communications; (5)alarm...
Vendor:Other Category:Other
The LMC7211 is a micropower CMOS comparator available in the space saving SOT23-5 package. This makes the comparator ideal for space and weight critical designs. The LMC7211 is supplied in two offset voltage grades, 5 mV...
Vendor:Other Category:Other
The LMC7111 is a micropower CMOS operational amplifier available in the space saving SOT 23-5 package. This makes the LMC7111 ideal for space and weight critical designs. The wide common-mode input range makes it easy de...
Vendor:Other Category:Other
The LMC7101 is a high-performance, low-power, operational amplifier which is pin-for-pin compatible with the National Semiconductor LMC7101. It features rail-to-rail input and output performance in Micrel's IttyBittyT...
Vendor:Other Category:Other
The LMC6953 is a voltage supervisory chip designed to meet PCI (Peripheral Component Interconnect) Specifications Revision 2.1. It monitors 5V and 3.3V power supplies. In cases of power-up, power-down, brown-out, power f...
Vendor:Other Category:Other
The LMC6772 is an ultra low power dual comparator with a maximum 10 A/comparator power supply current. It is designed to operate over a wide range of supply voltages, with a minimum supply voltage of 2.7V.
The common mo...
Vendor:Other Category:Other
The LMC6762 is an ultra low power dual comparator with a maximum supply current of 10 µA/comparator. It is designed to operate over a wide range of supply voltages, from 2.7V to 15V. The LMC6762 has guaranteed spec...
Vendor:Other Category:Other
The LMC669 uses sampled-data techniques to reduce the input offset voltage (VOS) of an amplifier or system to approximately 5 V.A four-stage comparator samples the summing node of an inverting-amplifier's a correction vo...
Vendor:Other Category:Other
The LMC6684 is a high performance operational amplifier which can operate over a wide range of supply voltages, with guaranteed specifications at 1.8V, 2.2V, 3V, 5V, and 10V.The LMC6684 provides an input common-mode volt...
Vendor:Other Category:Other
The LMC6682 is a high performance operational amplifier which can operate over a wide range of supply voltages, with guaranteed specifications at 1.8V, 2.2V, 3V, 5V, and 10V.The LMC6682 provides an input common-mode volt...
Vendor:Other Category:Other
The LMC6681/2/4 is a high performance operational amplifier which can operate over a wide range of supply voltages, with guaranteed specifications at 1.8V, 2.2V, 3V, 5V, and 10V.The LMC6681/2/4 provides an input common-m...
Mfg:NSC D/C:29800 Vendor:Other Category:Other
The LMC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. ...
Vendor:Other Category:Other
The LMC660EP CMOS Quad operational amplifier is ideal for operation from a single supply. It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground...
Vendor:Other Category:Other
The LMC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. ...
Mfg:NSC Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The LMC6584 is a high performance operational amplifier which can operate over a wide range of supply voltages with guaranteed specifications at 1.8V, 2.2V, 3V, 5V, and 10V.The LMC6584 provides an input common-mode volta...
Mfg:NS Pack:9602+ D/C:PDIP8 Vendor:Other Category:Other
The LMC6582/4 is a high performance operational amplifier which can operate over a wide range of supply voltages with guaranteed specifications at 1.8V, 2.2V, 3V, 5V, and 10V.The LMC6582/4 provides an input common-mode v...
Vendor:Other Category:Other
Low voltage operation and low power dissipation make the LMC6574/2 ideal for battery-powered systems. 3V amplifier performance is backed by 2.7V guarantees to ensure operation throughout battery lifetime. These guarantee...
Vendor:Other Category:Other
Low voltage operation and low power dissipation make the LMC6574/2 ideal for battery-powered systems.
3V amplifier performance is backed by 2.7V guarantees to ensure operation throughout battery lifetime. These guarante...
Vendor:Other Category:Other
The LMC6492/LMC6494 amplifiers were specifically developed for single supply applications that operate from −40°Cto +125°C. This feature is well-suited for automotive systems because of the wide temperature range. ...
Vendor:Other Category:Other
The LMC6492/LMC6494 amplifiers were specifically developed for single supply applications that operate from -40°C to +125°C. This feature is well-suited for automotive systems because of the wide temperature range. A uni...
Vendor:Other Category:Other
The LMC6484 provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes it unique among rail-to-rail input amplifiers.
It is ...
Vendor:Other Category:Other
The LMC6482AIMX is CMOS Dual Rail-To-Rail Input and Output Operational Amplifier. It provides a common-mode range that extends to both supply rails.It is ideal for systems, such as data acquisition, that require a large ...
Vendor:Other Category:Other
The LMC6482 provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes it unique among rail-to-rail input amplifiers.It is id...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.