Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The UCB1510 is a single chip, integrated mixed signal telecom codec that can directly be connected to a DAA and supports high speed modem protocols. The general purpose I/O pins provide programmable inputs and/or outputs to the system.
The UCB1510 has a serial AClink interface intended to communicate to the system controller. Both the codec input data and codec output data and the control register data are multiplexed on this interface.
UCB1510 Maximum Ratings
Symbol
Parameter
Conditions
Min
Max
0Unit
VDD
supply voltage
-0.5
+4.0
V
Vi
DC input voltage
-0.5
VDD + 0.5
V
Vo
DC output voltage
-
VDD + 0.5
V
Ii(d)
diode input current
-
10
mA
Io(d)
diode output current
-
10
mA
Io
continuous output current, digital outputs
-
4
mA
Tstg
storage temperature
-55
+15
[1] Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any conditions other than those described in the Absolute Maximum Rating section of this specification is not implied. [2] Parameters are valid over the ambient operating temperature unless otherwise specified. All voltages are with respect to VSSD, unless otherwise noted.
UCB1510 Features
· Sigma delta telecom codec with programmable sample rate, including digitally controlled input voltage level, mute, loop back and clip detection functions. The telecom codec can be directly connected to a Data Access Arrangement (DAA) and includes a built in sidetone suppression circuit · AClink (rev 2.1) interface with secondary codec support · 3.3 V supply voltage and built in power saving modes make the UCB1510 optimal for portable and battery powered applications · 5 V tolerant interface for motherboard/PC add on · Maximum operating current 25 mA · 8 general purpose IO pins for line interface control · Interrupt detection driven wake up sequence for ring detect · Low cost 12.288 MHz crystal