T0806, T0806PEQG, T0806-TCQ Selling Leads, Datasheet
MFG:TOS Package Cooled:TSSOP D/C:02+
T0806, T0806PEQG, T0806-TCQ Datasheet download
Part Number: T0806
MFG: TOS
Package Cooled: TSSOP
D/C: 02+
MFG:TOS Package Cooled:TSSOP D/C:02+
T0806, T0806PEQG, T0806-TCQ Datasheet download
MFG: TOS
Package Cooled: TSSOP
D/C: 02+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: T0806
File Size: 246864 KB
Manufacturer: ATMEL [ATMEL Corporation]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: T080
File Size: 133284 KB
Manufacturer: ETC [ETC]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: T0806-TCQ
File Size: 246864 KB
Manufacturer: ATMEL [ATMEL Corporation]
Download : Click here to Download
The T0806 is a laser diode driver for the operation of two different grounded laserdiodes for DVD-RAM (650 nm) and CD-RW (780 nm) drives. It includes three chan-nels for three different optical power levels which are controlled by a separate IC. Theread channel generates a continuous output level whereas channels 2 and 3 are pro-vided as write channels with very fast switching speeds. Write current pulses areenabled when a low signal is applied to the NE pins. All channels are summedtogether and switched to one of the two outputs IOUTA or IOUTB by the select inputSELA. Each channel can contribute up to 250 mA to the total output current of up to300 mA. A total gain of 100 is provided between each reference current input and theselected output. Although the reference inputs are current inputs, voltage control ispossible by using external resistors.
An on-chip RF oscillator is provided to reduce laser mode hopping noise during readmode. Swing can be set independently for the two selectable outputs with two differentresistors. Oscillation is enabled by a high signal at the ENOSC pin. Complete outputcurrent and oscillator switch-off is achieved by a 'low' signal at the ENABLE input.
Parameters |
Symbol |
Value |
Unit |
Supply voltage |
VCC |
0.5 to +6.0 |
V |
Input voltage at IR, I2, I3 |
VIN1 |
0.5 to +1.0 |
V |
Input voltage at NE2, NE3, ENOSC |
VIN2 |
0.5 to V +0.5 |
V |
Output voltage |
VOUT |
0.5 to VCC 1 |
V |
Total output current |
IOUT |
350 |
mA |
Output current per channel |
IOUT (IR, I2, I3) |
300 |
mA |
Power dissipation |
PMAX |
0.7 |
W |
Junction temperature |
TJ |
150 |
°C |
Storage temperature range |
Tsld |
65 to +125 |
°C |