RC733T/883, RC7341NE, RC7352 Selling Leads, Datasheet
MFG:RAY Package Cooled:CAN10 D/C:04+
RC733T/883, RC7341NE, RC7352 Datasheet download
Part Number: RC733T/883
MFG: RAY
Package Cooled: CAN10
D/C: 04+
MFG:RAY Package Cooled:CAN10 D/C:04+
RC733T/883, RC7341NE, RC7352 Datasheet download
MFG: RAY
Package Cooled: CAN10
D/C: 04+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: RC70
File Size: 148678 KB
Manufacturer: ETC [ETC]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: RC70
File Size: 148678 KB
Manufacturer: ETC [ETC]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: RC7352
File Size: 9747762 KB
Manufacturer:
Download : Click here to Download
The RC7352 is a "Per Pin" Parametric Measurement Unit (PMU) that can force voltage and measure current or force current and measure voltage. The RC7352 forces voltages from +15V to -5V when +VS is 20V and VS is -10V, or currents up to ±40mA. All logic inputs for the RC7352 are TTL compatible, while the open collector logic outputs are TTL/CMOS compatible.
Setting the SI/V (Select I/V) pin low puts the RC7352 in the force voltage and measure current mode. The resulting output voltage at the DUT matches the input applied to the
Parameter | Min. | Max. | Units |
Absolute Difference, +VS+|VS| | 32 | V | |
Digital Control Inputs | |||
SI/V, RS1, RS2, VDIS | -2 | +6 | V |
Comparator Inputs | |||
I/VMN, I/VMX | I/VMN +VS | VS I/VMX | V |
I/VIN | VS I/VIN £ +VS |
V |
• Force voltage/measure current and force current
measure voltage functions
• Forced voltage range (-5V to +15V)
• Four programmable measured current ranges:
Range A = ±20mA max
Range B = ±200mA max
Range C = ±1.0mA max
Range D = ±40mA max
• High resolution current force/measure ±0.05% = 2 bits
• Internal control circuitry for selecting ranges
• High accuracy: 12 bit linearity and 0.5% gain error
• High current range D current limit protection set
externally by the value of resistor RDIL
• Measurement output voltage can be disabled
• Forced current ranges:
Range A = ±20mA max
Range B = ±200mA max
Range C = ±1.0mA max
Range D = ±40mA max
• Measured voltage range: -5V to +15V
• High resolution voltage measurement (±0.05%) and
accuracy: (±10mV max. offset) and 0.5% gain error
• Internal current limit for ranges (A, B, & C)