Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The OPF372 series LED consists of a low cost plastic cap LED, pre-mounted and aligned in an ST* receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap.
The LED's are designed to interface with multimode optical fibers from 50/125 to 200/300 microns.
OPF372B Maximum Ratings
Reverse Voltage.
1.0 V
Continuous For ward Current.
100 mA(4)
Storage Tem perature Range
-55 to +100
Operating Tem perature Range
-40 to +85
Lead Sol dering Tem perature [1/16 inch (1.6 mm) from case for 5 sec. with sol deringiron]
240(1)
Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max when flow soldering. (2) Graded index fiber, 50 mm core, N.A. = 0.20. (3) To convert radiant power output to dBm, use the following expression dBm = 10 log (mW/1000). (4) Derate linearly @ 1.0 mA/ above 25. (5) Prebias @ 5 mA current. LED Burn-in All LED's are subject to 100% burn-in testing. Test conditions are 96 hours at 100 mA continuous current in 25 ambient.
OPF372B Features
·Component pre-mounted and ready to use ·Pre-tested with fiber to assure performance ·Popular ST* style receptacle