Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The MP6001 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 15W output power. It can also be used for boost and SEPIC applications.The MP6001 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over voltage protection. The MP6001 can also skip cycles to maintain zero load regulation.It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired.The MP6001 is ideal for telecom applications, and is available in a compact, thermally enhanced SO8 package with an exposed pad.
MP6001 Maximum Ratings
VSW............................................. 0.5V to +180V VIN ............................................. 0.3V to +120V All Other Pins............................... 0.3V to +6.5V Junction Temperature...................................150 Lead Temperature .......................................260 Storage Temperature ................65 to +150 Recommended Operating Conditions (2) Supply Voltage VCC............................ 4.5 V to 6V Output Voltage VSW................... 0.5V to +150V Input Voltage VIN....................... 0.3V to +100V Operating Temperature ...............40 to +85 Thermal Resistance (3)JAJC SOIC8N (Exposed Pad) ............ 50...... 10... /W
Notes: 1) Exceeding these ratings may damage the device. 2) The device is not guaranteed to function outside of its operating conditions. 3) Measured on approximately 1" square of 1 oz copper.
MP6001 Features
• Integrated 0.9Ω 150V Power Switch • Cycle-by-Cycle Current Limiting • Programmable Switching Frequency • Duty Cycle Limiting with Line Feed Forward • Integrated 100V Startup Circuit • Internal Slope Compensation • Disable Function • Built-in Soft-Start • Line Under Voltage Lockout • Line Over Voltage Protection • Auto-Restart for Opened/Shorted Output • Zero Load Regulation • Thermal Shutdown
MP6001 Typical Application
• Telecom Equipment • VoIP Phones, Power over Ethernet (PoE) • Distributed Power Conversion
The MP6002 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 30W output power. It can also be used for boost and SEPIC applications. The MP6002 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over voltage protection. The MP6002 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired.The MP6002 is ideal for telecom applications, and is available in a compact, thermally enhanced SO8 package with an exposed pad.