Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOUCH SCREEN CONTROL The MK712 Touch Screen Controller IC provides all the screen drive, A to D converter and control circuits to easily interface to 4-wire analog resistive touch screens. The IC continually monitors the screen waiting for a touch. In this mode, the supply current is typically 0.5A. When the screen is touched, the IC performs analog to digital conversions to determine the location of the touch, stores the X and Y locations in the registers, and issues an interrupt. This process is repeated up to 197 times per second until no further screen touches are detected, at which time the low current mode is resumed.
Packaged in 28-pin SSOP (150 mil) or 28-pin SOIC (300 mil)
Industrial (-30°C to +70°C), commercial (0 to +70°C), and automotive (-35°C to +85°C) temperature ranges
Available in Pb (lead) free package
Fully integrated, lowest power solution
Low standby current of 0.5A (typical) at 5.0V
Active current while converting less than 10 mA
Resolves 350 dots/inch on 10.5" display
Maximum speed of 197 points/second
Ratiometric conversion may eliminate screen calibration
Automatically wakes up and goes back to standby
3.3V or 5V supply
12 bit A/D converter
Simplifies the writing of software for touch screens
Extended temperature range available o Capacitors are the only external components required
Touch screen is directly driven - no external transistors are required
Programmable conversion rate
A to D Converter is monotonic
Parallel interface
MK712RI Maximum Ratings
Package
QSOP 28
Speed
NA
Temperature
I
Voltage
3.3 V
MK712RTR Parameters
Technical/Catalog Information
MK712RTR
Vendor
IDT, Integrated Device Technology Inc
Category
Integrated Circuits (ICs)
Mounting Type
Surface Mount
Package / Case
28-SSOP
Type
Controller
Supply Voltage
3 V ~ 5.5 V
Packaging
Tape & Reel (TR)
Operating Temperature
0°C ~ 70°C
Sampling Rate (Per Second)
-
Data Interface
Parallel
Voltage Supply Source
Single
Resolution (Bits)
12 b
Drawing Number
*
Lead Free Status
Contains Lead
RoHS Status
RoHS Non-Compliant
Other Names
MK712RTR MK712RTR
MK712RTR General Description
TOUCH SCREEN CONTROL The MK712 Touch Screen Controller IC provides all the screen drive, A to D converter and control circuits to easily interface to 4-wire analog resistive touch screens. The IC continually monitors the screen waiting for a touch. In this mode, the supply current is typically 0.5A. When the screen is touched, the IC performs analog to digital conversions to determine the location of the touch, stores the X and Y locations in the registers, and issues an interrupt. This process is repeated up to 197 times per second until no further screen touches are detected, at which time the low current mode is resumed.
Packaged in 28-pin SSOP (150 mil) or 28-pin SOIC (300 mil)
Industrial (-30°C to +70°C), commercial (0 to +70°C), and automotive (-35°C to +85°C) temperature ranges
Available in Pb (lead) free package
Fully integrated, lowest power solution
Low standby current of 0.5A (typical) at 5.0V
Active current while converting less than 10 mA
Resolves 350 dots/inch on 10.5" display
Maximum speed of 197 points/second
Ratiometric conversion may eliminate screen calibration
Automatically wakes up and goes back to standby
3.3V or 5V supply
12 bit A/D converter
Simplifies the writing of software for touch screens
Extended temperature range available o Capacitors are the only external components required
Touch screen is directly driven - no external transistors are required
Programmable conversion rate
A to D Converter is monotonic
Parallel interface
MK712RTR Maximum Ratings
Package
QSOP 28
Speed
NA
Temperature
C
Voltage
3.3 V
MK712S Parameters
Technical/Catalog Information
MK712S
Vendor
IDT, Integrated Device Technology Inc
Category
Integrated Circuits (ICs)
Mounting Type
Surface Mount
Package / Case
28-SOIC
Type
Controller
Supply Voltage
3 V ~ 5.5 V
Packaging
Tube
Operating Temperature
0°C ~ 70°C
Sampling Rate (Per Second)
-
Data Interface
Parallel
Voltage Supply Source
Single
Resolution (Bits)
12 b
Drawing Number
*
Lead Free Status
Contains Lead
RoHS Status
RoHS Non-Compliant
Other Names
MK712S MK712S
MK712S General Description
TOUCH SCREEN CONTROL The MK712 Touch Screen Controller IC provides all the screen drive, A to D converter and control circuits to easily interface to 4-wire analog resistive touch screens. The IC continually monitors the screen waiting for a touch. In this mode, the supply current is typically 0.5A. When the screen is touched, the IC performs analog to digital conversions to determine the location of the touch, stores the X and Y locations in the registers, and issues an interrupt. This process is repeated up to 197 times per second until no further screen touches are detected, at which time the low current mode is resumed.
Packaged in 28-pin SSOP (150 mil) or 28-pin SOIC (300 mil)
Industrial (-30°C to +70°C), commercial (0 to +70°C), and automotive (-35°C to +85°C) temperature ranges
Available in Pb (lead) free package
Fully integrated, lowest power solution
Low standby current of 0.5A (typical) at 5.0V
Active current while converting less than 10 mA
Resolves 350 dots/inch on 10.5" display
Maximum speed of 197 points/second
Ratiometric conversion may eliminate screen calibration
Automatically wakes up and goes back to standby
3.3V or 5V supply
12 bit A/D converter
Simplifies the writing of software for touch screens
Extended temperature range available o Capacitors are the only external components required
Touch screen is directly driven - no external transistors are required