Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The KD1084xx is a low drop voltage regulator able to provide up to 5 A of output current. Dropout is guaranteed at a maximum of 1.5 V at the maximum output current, decreasing at lower loads. The KD1084xx is pin to pin compatible with he older 3-terminal adjustable regulators but has better performances in term of drop and output tolerance.
A 2.85 V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the KD1084xx quiescent current flows into the load, so increase efficiency. Only a 10 µF minimum capacitor is need for stability.
The devices are supplied in D2PAK and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25 for "A" version and ± 2 % at 25 for standard version.
KD1084DT33R Maximum Ratings
Symbol
Parameter
Value
Unit
VI
DC input voltage
12
V
IO
Output current
Internally limited
PD
Power dissipation
Internally limited
TSTG
Storage temperature range
-55 to +150
TOP
Operating junction temperature range
-40 to +125
Note: Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.
KD1084DT33R Features
` Typical dropout 1.3 V (at 5 A) ` Three terminal adjustable or fixed output voltage 1.8 V, 3.3 V. ` Guaranteed output current up to 5 A ` Output tolerance ±1 % at 25 and ± 2 % in full temperature range for the "A" version ` Output tolerance ± 2 % at 25 and ± 3 % in full temperature range internal power and thermal limit ` Wide operating temp. range -40 to 125 ` Package available: D2PAK and DPAK ` Pinout compatibility with standard adjustable VREG
KD1084DT33R Connection Diagram
KD1084DT-R Parameters
Technical/Catalog Information
KD1084DT-R
Vendor
STMicroelectronics
Category
Integrated Circuits (ICs)
Regulator Type
Single Output
Package / Case
DPak, SC-63, TO-252 (2 leads+tab)
Packaging
Tape & Reel (TR)
Regulator Topology
Positive Adjustable
Current - Output
5A
Voltage - Output
Adjustable
Operating Temperature
-40°C ~ 125°C
Voltage - Input
2.85 ~ 10 V
Number of Regulators
1
Current - Limit (Min)
-
Current Short Circuit (Isc)
5.5A
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
KD1084DT R KD1084DTR
KD1084DT-R General Description
The KD1084xx is a low drop voltage regulator able to provide up to 5 A of output current. Dropout is guaranteed at a maximum of 1.5 V at the maximum output current, decreasing at lower loads. The KD1084xx is pin to pin compatible with he older 3-terminal adjustable regulators but has better performances in term of drop and output tolerance.
A 2.85 V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the KD1084xx quiescent current flows into the load, so increase efficiency. Only a 10 µF minimum capacitor is need for stability.
The devices are supplied in D2PAK and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25 for "A" version and ± 2 % at 25 for standard version.
KD1084DT-R Maximum Ratings
Symbol
Parameter
Value
Unit
VI
DC input voltage
12
V
IO
Output current
Internally limited
PD
Power dissipation
Internally limited
TSTG
Storage temperature range
-55 to +150
TOP
Operating junction temperature range
-40 to +125
Note: Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.
KD1084DT-R Features
` Typical dropout 1.3 V (at 5 A) ` Three terminal adjustable or fixed output voltage 1.8 V, 3.3 V. ` Guaranteed output current up to 5 A ` Output tolerance ±1 % at 25 and ± 2 % in full temperature range for the "A" version ` Output tolerance ± 2 % at 25 and ± 3 % in full temperature range internal power and thermal limit ` Wide operating temp. range -40 to 125 ` Package available: D2PAK and DPAK ` Pinout compatibility with standard adjustable VREG