KD1084

·nTYPICAL DROPOUT 1.3V (AT 5A)
· THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V.
· GUARANTEED OUTPUT CURRENT UP TO 5A
· OUPUT TOLERANCE ±1% AT 25°C AND ±2% IN FULL TEMPERATURE RANGE FOR THE "A" VERSION
· OUPUT TOLERANCE ±2% AT 25°C AND ±3% IN FULL TEMPERATURE RANGE INTERNAL POWER AND THERMAL LIMIT
· WIDE OPERATING TEMPERATURE RANGE -40°C TO 125°C
· PACKAGE AVAILABLE : TO-220, D2PAK, D2PAK/A, DPAK
· PINOUT COMPATIBILITY WITH STANDARD ADJUSTABLE VREG

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.

The KD1084 is a LOW DROP Voltage Regulator able to provide up to 5A of Output Current. Dropout is guaranteed at a maximum of 1.5V at the maximum output current, decreasing at lower loads. The KD1084 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance .

A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the KD1084 quiescent current flows into the load, so increase efficiency. Only a 10F minimum capacitor is need for stability.

The devices KD1084 are supplied in TO-220, D2PAK, D2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25°C for "A" version and ±2% at 25°C for standard version