Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The JS28F128J3D-75 is a kind of Numonyx™ embedded flash memory J3 version D. It is offered in 128-Mbit density. Besides, it brings reliable, low-voltage capability (3 V read, program, and erase) with high speed, low-power operation. The device is ideal for code and data applications where high density and low cost are required, such as in networking, telecommunications, digital set top boxes, audio recording, and digital imaging.
There are some features as follows: (1) architecture: high-density symmetrical 128-Kbyte blocks and 128 Mbit (128 blocks); (2) performance: 75 ns initial access speed, 25 ns 8-word and 4-word asynchronous page-mode reads, 32-byte write buffer and 4 s per byte effective programming time; (3) system voltage and power: VCC=2.7 to 3.6 V and VCCQ=2.7 to 3.6 V; (4)security: enhanced security options for code protection, 128-bit protection register, 64-bit unique device identifier, 64-bit user-programmable OTP cells, absolute protection with VPEN = GND, individual block locking and block erase/program lockout during power transitions; (5) software: program and erase suspend support, flash data integrator (FDI) and common flash interface (CFI) compatible; (6) quality and reliability: -40 to +85 operating temperature, 100K minimum erase cycles per block and 0.13 m ETOX™ VIII process.
The following is some general notes: (1): storage temperature range (TS) is from -65 to +125; (2): temperature under bias expanded (TA, ambient) is from -40 to +85; (3) VCC voltage is from -2.0 to +5.6 V; (4): VCCQ is from -2.0 to +5.6 V; (5): voltage on any input/output signal (except VCC, VCCQ) is from -2.0 to VCCQ(max)+2.0 V; (6): ISH (output short circuit current) is 100 mA.