JS28F128J3D-75

The JS28F128J3D-75 is a kind of Numonyx™ embedded flash memory J3 version D. It is offered in 128-Mbit density. Besides, it brings reliable, low-voltage capability (3 V read, program, and erase) with high speed, low-power operation. The JS28F128J3D-75 is ideal for code and data applications where high density and low cost are required, such as in networking, telecommunications, digital set top boxes, audio recording, and digital imaging.

There are some features of JS28F128J3D-75 as follows: (1) architecture: high-density symmetrical 128-Kbyte blocks and 128 Mbit (128 blocks); (2) performance: 75 ns initial access speed, 25 ns 8-word and 4-word asynchronous page-mode reads, 32-byte write buffer and 4 s per byte effective programming time; (3) system voltage and power: VCC=2.7 to 3.6 V and VCCQ=2.7 to 3.6 V; (4)security: enhanced security options for code protection, 128-bit protection register, 64-bit unique device identifier, 64-bit user-programmable OTP cells, absolute protection with VPEN = GND, individual block locking and block erase/program lockout during power transitions; (5) software: program and erase suspend support, flash data integrator (FDI) and common flash interface (CFI) compatible; (6) quality and reliability: -40 to +85 operating temperature, 100K minimum erase cycles per block and 0.13 m ETOX™ VIII process.

The following is some general notes of JS28F128J3D-75: (1): storage temperature range (TS) is from -65 to +125; (2): temperature under bias expanded (TA, ambient) is from -40 to +85; (3) VCC voltage is from -2.0 to +5.6 V; (4): VCCQ is from -2.0 to +5.6 V; (5): voltage on any input/output signal (except VCC, VCCQ) is from -2.0 to VCCQ(max)+2.0 V; (6): ISH (output short circuit current) is 100 mA.