Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The IDTQS74FCT2574 is an 8-bit high-speed CMOS TTL-compatible buffered register with 3-state outputs and a 25 resistor, useful for driving transmission lines and reducing system noise. The 2574T series parts can replace the 574T series to reduce noise in an existing design. All inputs have clamp diodes for undershoot noise suppression. All outputs have ground bounce suppression. Outputs will not load an active bus when Vcc is removed from the device.
IDTQS74FCT2574CT Maximum Ratings
Symbol
Description
Max
Unit
VTERM
Terminal Voltage with Respect to GND
0.5 to +7
V
TSTG
Storage Temperature
65 to +150
°C
IOUT
DC Output Current Max Current Sink/Pin
+120
mA
IIK
Input Diode Current, VIN < 0
-20
mA
IOK
DC Output Current, VOUT < 0
-50
mA
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDTQS74FCT2574CT Features
• CMOS power levels: <7.5mW static • Undershoot clamp diodes on all outputs • True TTL input and output compatibility • Ground bounce controlled outputs • Reduced output swing of 0 to 3.5V • Built-in 25 series resistor outputs reduce reflection and other system noise • Std., A and C speed grades with 5.2ns tPD for C • IOL = 12mA • Available in SOIC and QSOP packages
IDTQS74FCT2574CT Connection Diagram
IDTQS74FCT2574T General Description
The IDTQS74FCT2574 is an 8-bit high-speed CMOS TTL-compatible buffered register with 3-state outputs and a 25 resistor, useful for driving transmission lines and reducing system noise. The 2574T series parts can replace the 574T series to reduce noise in an existing design. All inputs have clamp diodes for undershoot noise suppression. All outputs have ground bounce suppression. Outputs will not load an active bus when Vcc is removed from the device.
IDTQS74FCT2574T Maximum Ratings
Symbol
Description
Max
Unit
VTERM
Terminal Voltage with Respect to GND
0.5 to +7
V
TSTG
Storage Temperature
65 to +150
°C
IOUT
DC Output Current Max Current Sink/Pin
+120
mA
IIK
Input Diode Current, VIN < 0
-20
mA
IOK
DC Output Current, VOUT < 0
-50
mA
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDTQS74FCT2574T Features
• CMOS power levels: <7.5mW static • Undershoot clamp diodes on all outputs • True TTL input and output compatibility • Ground bounce controlled outputs • Reduced output swing of 0 to 3.5V • Built-in 25 series resistor outputs reduce reflection and other system noise • Std., A and C speed grades with 5.2ns tPD for C • IOL = 12mA • Available in SOIC and QSOP packages
IDTQS74FCT2574T Connection Diagram
IDTQS74FCT2823AT General Description
The IDTQS74FCT2823T is a 9-bit high-speed CMOS TTL-compatible buffered register with 3-state outputs, with a 25 resister that is useful for driving transmission lines and reducing system noise. The 2823 series parts can replace the 823 series to reduce noise in an existing design. All inputs have clamp diodes for undershoot noise suppression. All outputs have ground bounce suppression. Outputs will not load an active bus when Vcc is removed from the device.
IDTQS74FCT2823AT Maximum Ratings
Symbol
Description
Max
Unit
VTERM
Terminal Voltage with Respect to GND
0.5 to +7
V
TSTG
Storage Temperature
65 to +150
°C
IOUT
DC Output Current Max Current Sink/Pin
+120
mA
IIK
Input Diode Current, VIN < 0
-20
mA
IOK
DC Output Current, VOUT < 0
-50
mA
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDTQS74FCT2823AT Features
• CMOS power levels: <7.5mW static • Undershoot clamp diodes on all outputs • True TTL input and output compatibility • Ground bounce controlled outputs • Reduced output swing of 0 to 3.5V • Built-in 25 series resistor outputs reduce reflection and other system noise • A and B speed grades • IOL = 12mA • Available in SOIC and QSOP packages