Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The QS3VH251 HotSwitch Quad 2:1 multiplexer/demultiplexer is a high bandwidth bus switch. The QS3VH251 has very low ON resistance, resulting in under 250ps propagation delay through the switch. The Select (Sx) input controls the data flow. The multiplexers/demultiplexers are enabled when the Enable (E) input is low. In the ON state, the switches can pass signals up to 5V. In the OFF state, the switches offer very high impedence at the terminals.
The combination of near-zero propagation delay, high OFF impedance, and over-voltage tolerance makes the QS3VH251 ideal for high performance comminucation applications.
The QS3VH251 is characterized for operation from -40°C to +85°C.
IDTQS3VH251 Maximum Ratings
Symbol
Description
Max
Unit
VTERM(2)
Supply Voltage to Ground
0.5 to 4.6
V
VTERM(3)
DC Switch Voltage VS
0.5 to 5.5
V
VTERM(3)
DC Input Voltage VIN
0.5 to 5.5
V
VAC
AC Input Voltage (pulse width 20ns)
3
V
IOUT
DC Output Current (max. current/pin)
120
mA
TSTG
Storage Temperature
65 to +15
°C
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC.
IDTQS3VH251 Features
• N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND 5V tolerant in OFF and ON state • 5V tolerant I/Os • Low RON - 4 typical • Flat RON characteristics over operating range • Rail-to-rail switching 0 - 5V • Bidirectional dataflow with near-zero delay: no added ground bounce • Excellent RON matching between channels • VCC operation: 2.3V to 3.6V • High bandwidth - up to 500MHz • LVTTL-compatible control Inputs • Undershoot Clamp Diodes on all switch and control Inputs • Low Demux capacitance, 4pF typical • Available in QSOP and TSSOP packages
The QS3VH253 HotSwitch Dual 4:1 multiplexer/demultiplexer is a high bandwidth bus switch. The QS3VH253 has very low ON resistance, resulting in under 250ps propagation delay through the switch. The Select (Sx) inputs control the data flow. The multiplexers/demultiplexers are enabled when the Enable (EA, EB) inputs are low. In the ON state, the switches can pass signals up to 5V. In the OFF state, the switches offer very high impedence at the terminals.
The combination of near-zero propagation delay, high OFF impedence, and over-voltage tolerance makes the QS3VH253 ideal for high performance communication applications.
The QS3VH253 is characterized for operation from -40°C to +85°C.
IDTQS3VH253 Maximum Ratings
Symbol
Description
Max
Unit
VTERM(2)
Supply Voltage to Ground
0.5 to 4.6
V
VTERM(3)
DC Switch Voltage VS
0.5 to 5.5
V
VTERM(3)
DC Input Voltage VIN
0.5 to 5.5
V
VAC
AC Input Voltage (pulse width 20ns)
3
V
IOUT
DC Output Current (max. current/pin)
120
mA
TSTG
Storage Temperature
65 to +15
°C
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC.
www.idt.com
IDTQS3VH253 Features
• N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND 5V tolerant in OFF and ON state • 5V tolerant I/Os • Low RON - 4 typical • Flat RON characteristics over operating range • Rail-to-rail switching 0 - 5V • Bidirectional dataflow with near-zero delay: no added ground bounce • Excellent RON matching between channels • VCC operation: 2.3V to 3.6V • High bandwidth - up to 500MHz • LVTTL-compatible control Inputs • Undershoot Clamp Diodes on all switch and control Inputs • Low I/O capacitance, 4pF typical • Available in QSOP and TSSOP packages