Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The octal bus switch has standard 244 pinouts. The CBTLV3244 is designed for asynchronous communication between data buses. Sets of four switches are controlled by one output Enable (OE). When OEis low, the set of four bus switches is on and port A is connected to port B. When OEis high, the set of four bus switches is off and a high impedance exists between port A and port B.
To ensure the high-impedance state during power up or power down, both OEs should be tied to VCC through a pullup resistor.
IDT74CBTLV3244 Maximum Ratings
Symbol
Description
Max
Unit
VCC
Supply Voltage Range
0.5 to 4.6
V
VI
Input Voltage Range
0.5 to 4.6
V
Continuous Channel Current
128
mA
IIK
Input Clamp Current, VI/O < 0
-50
mA
TSTG
Storage Temperature Range
65 to +150
°C
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDT74CBTLV3244 Features
· Pin-out compatible with standard '244 logic · 5W A/B bidirectional switch · Isolation Under Power-Off Conditions · Over-voltage tolerant · Latch-up performance exceeds 100mA · VCC = 2.3V - 3.6V, Normal Range · ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) · Available in SSOP, QSOP, and TSSOP packages
IDT74CBTLV3244 Typical Application
· 3.3V High Speed Bus Switching and Bus Isolation
IDT74CBTLV3244 Connection Diagram
IDT74CBTLV3245 General Description
The octal bus switch has standard 245 pinouts. The CBTLV3245 is designed for asynchronous communication between data buses. When Output Enable (OE) is low, the 8-bit bus switch is on and port A is connected to Port B. When OE is high, the switch is off and a high impedance exists between Port A and Port B. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor.
IDT74CBTLV3245 Maximum Ratings
Symbol
Description
Max.
Unit
VCC
SupplyVoltage Range
0.5 to +4.6
V
VI
Input Voltage Range
0.5 to +4.6
V
Continuous Channel Current
128
mA
IIK
Input Clamp Current, VI/O < 0
-50
mA
TSTG
Storage TemperatureRange
65 to +150
° C
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
IDT74CBTLV3245 Features
Pin-out compatible with standard '245 logic 5 A/B bidirectional switch Isolation Under Power-Off Conditions Over-voltage tolerant Latch-up performance exceeds 100mA VCC = 2.3V - 3.6V, Normal Range ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) Available in SSOP, QSOP, and TSSOP packages