Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
This 16-bit bus transceiver is built using advanced dual metal CMOS technology. The ALVCHR162245 device is designed for asynchronous communication between data buses. The control-function implementation minimizes external timing requirements.
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction control DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
The ALVCHR162245 has series resistors in the device output structure which will significantly reduce line noise when used with light loads. This driver has been designed to drive ±12mA at the designated threshold levels.
The ALVCHR162245 has "bus-hold" which retains the inputs' last state whenever the input bus goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors.
IDT74ALVCHR162245 Maximum Ratings
Symbol
Description
Max
Unit
VTERM(2)
Terminal Voltage with Respect to GND
0.5 to +4.6
V
VTERM(3)
Terminal Voltage with Respect to GND
0.5 to VCC+0.5
V
TSTG
Storage Temperature
65 to +150
IOUT
DC Output Current
50 to +50
mA
IIK
Continuous Clamp Current, VI < 0 or VI > VCC
±50
mA
IOK
Continuous Clamp Current, VO < 0
50
mA
ICC ISS
Continuous Current through each VCC or GND
±100
mA
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC.
IDT74ALVCHR162245 Features
• 0.5 MICRON CMOS Technology • Typical tSK(o) (Output Skew) < 250ps • ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range • VCC = 2.5V ± 0.2V • CMOS power levels (0.4µ W typ. static) • Rail-to-Rail output swing for increased noise margin • Available in SSOP, TSSOP, and TVSOP packages
IDT74ALVCHR162245 Typical Application
• 3.3V high speed systems • 3.3V and lower voltage computing systems