HV825, HV825LG, HV826 Selling Leads, Datasheet
MFG:SARRIS Package Cooled:SMD8 D/C:00+
HV825, HV825LG, HV826 Datasheet download
Part Number: HV825
MFG: SARRIS
Package Cooled: SMD8
D/C: 00+
MFG:SARRIS Package Cooled:SMD8 D/C:00+
HV825, HV825LG, HV826 Datasheet download
MFG: SARRIS
Package Cooled: SMD8
D/C: 00+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: HV825
File Size: 335305 KB
Manufacturer: SUTEX [Supertex, Inc]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HV825LG
File Size: 335305 KB
Manufacturer: SUTEX [Supertex, Inc]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HV826
File Size: 342440 KB
Manufacturer: SUTEX [Supertex, Inc]
Download : Click here to Download
The Supertex HV825 is a high voltage driver designed for driving EL lamps typically up to 6nF. The input supply voltage range is from 1.0V to 1.6V. The device uses a single inductor and a minimum number of passive components. Typical output voltage that can be applied to the EL lamp is ±56V.
The HV825 can be enabled/disabled by connecting the RSW-osc resistor to VDD/ground.
The HV825 has two internal oscillators, a switching bipolar junction transistor (BJT), and a high voltage EL lamp driver. The frequency for the switching BJT is set by an external resistor connected between the RSW-osc pin and the supply pin VDD. The EL lamp driver frequency is set by an external resistor connected between REL-osc pin and the VDD pin. An external inductor is connected between the LX and VDD pins. A 0.01 to 0.1F, 100V capacitor is connected between CS and ground. The EL lamp is connected between VA and VB.
The switching BJT charges the external inductor and discharges it into the 0.01 to 0.1F, 100V capacitor at CS. The voltage at CS will start to increase. The outputs VA and VB are configured as an H-bridge and are switching in opposite states to achieve a peak-to-peak voltage of two times the VCS voltage across the EL lamp.
The Supertex HV826 is a high voltage driver designed for driving EL lamps. The input supply voltage range is from 1.8V to 3.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±80V. The chip can be enabled/ disabled by connecting the resistor on R SW-OSC to VDD/ground.
The HV826 has two internal oscillators, a switching MOSFET, and a high voltage EL lamp driver. The frequency for the switching MOSFET is set by an external resistor connected between the R SW-osc pin and the supply pin VDD. The EL lamp driver frequency is set by an external resistor connected between REL-osc pin and the VDD pin. An external inductor is connected between the LX and VDD pins. A 0.01-0.1F capacitor is connected between CS and ground. The EL lamp is connected between VA and VB.
The switching MOSFET charges the external inductor and discharges it into the capacitor at CS. The voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 80V, the switching MOSFET is turned OFF to conserve power. The outputs VA and VB are configured as an H bridge and are switching in opposite states to achieve 160V peak-to-peak across the EL lamp.