EN25F80, EN25F80-100HCP, EN25F80-100QIP Selling Leads, Datasheet
MFG:EOS Package Cooled:SOP D/C:08+
EN25F80, EN25F80-100HCP, EN25F80-100QIP Datasheet download
Part Number: EN25F80
MFG: EOS
Package Cooled: SOP
D/C: 08+
MFG:EOS Package Cooled:SOP D/C:08+
EN25F80, EN25F80-100HCP, EN25F80-100QIP Datasheet download
MFG: EOS
Package Cooled: SOP
D/C: 08+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: EN25F80-75QC
File Size: 465799 KB
Manufacturer: EON [Eon Silicon Solution Inc.]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: EN201D-05A
File Size: 233496 KB
Manufacturer: FUJI [Fuji Electric]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: EN201D-05A
File Size: 233496 KB
Manufacturer: FUJI [Fuji Electric]
Download : Click here to Download
The EN25F80 is a 8M-bit (1024K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25F80 is designed to allow either single Sector at a time or full chip erase operation. The EN25F80 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector.
Parameter | Value | Unit |
Storage Temperature | -65 to +125 | °C |
Plastic Packages | -65 to +125 | °C |
Output Short Circuit Current1 | 200 | mA |
Input and Output Voltage (with respect to ground) 2 | -0.5 to +4.0 | V |
Vcc | -0.5 to +4.0 | V |
Notes:
1. No more than one output shorted at a time. Duration of the short circuit should not be greater than one second.
2. Minimum DC voltage on input or I/O pins is 0.5 V. During voltage transitions, inputs may undershoot Vss to 1.0V for periods of up to 50ns and to 2.0 V for periods of up to 20ns. See figure below. Maximum DC voltage on output and I/O pins is Vcc + 0.5 V. During voltage transitions, outputs may overshoot to Vcc + 1.5 V for periods up to 20ns. See figure below.