Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The APExx16 series are very low cost voice and melody synthesizer with 4-bits CPU. They have various features including 4-bits ALU, ROM, RAM, I/O ports, timers, clock generator, voice and melody synthesizer, and PWM (Direct drive) or D/A current outputs, etc. The audio synthesizer contains one voice-channel and two melody-channels. Furthermore, they consist of 27 instructions in these devices. With CMOS technology and halt function can minimize power dissipation. Their architectures are similar to RISC, with two stages of instruction pipeline. They allow all instructions to be executed in a single cycle, except for program branches and data table read instructions (which need two instruction cycles).
APE1016 Features
(1) Single power supply can operate from 2.4V to 5.5V at 4MHz or 8MHz. (2) Program ROM: 16k x 10 bits ( APE8416 /APE10616 /APE12716 are 64k x 10 bits ) (3) 1 set of 16-bits DPR can access up to 64k x 10 bits melody data memory space, and 1 set of 19-bits VPR can access up to 512k x 10 bits voice data memory space.
Product
Voice Duration (sec)
Voice Pointer (VPR)
ROM Size (10-bit)
APE1016
10
15-bits
32k
APE1516
15
16-bits
48k
APE2016
20
16-bits
64k
APE3116
31
17-bits
96k
APE4116
41
17-bits
128k
APE6316
63
18-bits
192k
APE8416
84
18-bits
256k
APE10616
106
19-bits
320k
APE12716
27
19-bits
384k
(4) Data Registers: a). 128 x 4-bits data RAM (00-7Fh) b). Unbanked special function registers (SFR) range: 00h-2Fh (5) I/O Ports: a). PRA: 4-bits I/O Port A (10h) can be programmed to input/output individually. (Register control) b). PRB: 4-bits I/O Port B (13h) can be configured to input/output individually. (Mask option) c). PRC: 4-bits I/O Port C (14h) can be programmed to input/output individually. (Register control) d). PRD: 4-bits I/O Port D (15h) can be programmed to input/output individually. (Register control) (6) On-chip clock generator: Resistive Clock Drive (RM) or Crystal oscillator (HM) (7) Timer: 1-set Voice Interrupt (Timer0: a 9-bits auto-reload timer/counter). (8) Stack: 2-level subroutine nesting. (9) Built-in 4 Level Volume Control can be programmed. (10) Built-in 8 Level DAC current output can be configured. (Mask option) (11) Built-in IR Carry Output: Port B[1] can be configured as IR pin by 38k / 56kHz. (Mask option) (12) External Reset: Port B[3] can be configured as reset pin. (Mask opton) (13) HALT and Release from HALT function to reduce power consumption (14) Watch Dog Timer (WDT) (15) Instruction: 1-cycle instruction except for table read and program branches which are 2-cycles (16) Number of instruction: 27 (17) DAC: 1 channel voice and dual tone melody synthesizer (One 9-bits Cout or 8-bits PWM output).