Position: Home > DataSheet > Index 6 > 639 Series > 639074TWN, 6391, 63910-8200

Low Cost Custom Prototype PCB Manufacturer

639074TWN, 6391, 63910-8200

Table of contents:
Info of 639074TWN
Info of 6391
Info of 63910-8200

639074TWN, 6391, 63910-8200 Selling Leads, Datasheet

MFG:Molex Package Cooled:BGA D/C:N/A

639074TWN, 6391, 63910-8200 Datasheet download

Five Points

Part Number: 639074TWN

MFG: Molex

Package Cooled: BGA

D/C: N/A

Attentive hint

Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.

How to buy ?

How long will receive a response.

Top Sellers:

TOP

6391 General Description

The LM193 consists of two independent precision voltage comparators with an offset voltage specification as low as 5.0mV max for two comparators which were designed specically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristics in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.

Application areas include limit comparators, simple analog to digital converters; pulse,squarewave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates. The LM193 was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM193 will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.

6391 Maximum Ratings

Supply Voltage, V+
                                                36Vdc or +18Vdc
Differential Input Voltage
(Note 6)
                                                36Vdc
Input Voltage
                                                -0.3Vdc to +36Vdc
Input Current (Vin < -0.3 Vdc)
(Note 5)
                                                50mA
Maximum Junction Temperature
                                                150 C
Power Dissipation
(Note 2, 3)
METAL CAN                              660mW
TBD CERDIP
Output Short-Circuit to Gnd
(Note 4)
                                                Continuous
Operating Temperature Range
                                                -55 C to +125 C
Thermal Resistance
ThetaJA
   METAL CAN (Still Air)            174 C/W
              (500LF/Min Air flow)   99 C/W
   CERDIP     (Still Air)               146 C/W
              (500LF/Min Air flow)   85 C/W
ThetaJC
   METAL CAN                          44 C/W
    CERDIP                               33 C/W
Storage Temperature Range
                                               -65 C to +150 C
Lead Temperature
(Soldering, 10 seconds)                      +260 C
ESD Tolerance
(Note 7)
                                                             500V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions.

Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (Ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower.

Note 3: The LM193 must be derated based on a 150 C maximum junction temperature. The low bias dissipation and the ON-OFF characteristic of the outputs keeps the chip dissipation very small (PD<100mV), provided the output transistors are allowed to saturate. Note 4: Short circuits from the output to V+ can cause excessive heating and eventual destruction. When considering short circuits to ground, the maximum output current is approximately 20mA independent of the magnitude of V+.

Note 5: This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states will re-establish when the input voltagge, which was negative,again returns to a value great than -0.3Vdc.

Note 6: Positive excursions of input voltage may exceed the power supply level. As long as the other voltage remains within the common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than -0.3Vdc (or 0.3Vdc below the magnitude of the negative power supply, if used).

Note 7: Human body model, 1.5K Ohms in series with 100pF.

6391 Features

- Wide supply
- Voltage range                                         2.0Vdc to 36Vdc
- Single or dual supplies                       +1.0Vdc to +18Vdc
- Very low supply current drain (0.4mA)
independent of supply voltage
- Low input biasing current                                   25nA Typ
- Low input offset current                                      +3nA Typ
- Input common-mode voltage range
includes ground
- Differential input voltage range
equal to the power supply voltage
- Low output saturation voltage             250mV at 4mA Typ
- Output voltage compatible with TTL,
DTL, ECL, MOS and CMOS logic systems

Hotspot Suppliers Product

Product List A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

MT58L64L18CT-10

Price: 4-6 USD

MT58L64L18CT-10 TQFP100
DL-7140-211M

Price: 5-6.5 USD

DL-7140-211M laser tube
74LVC74APG

Price: 4-5 USD

74LVC74APG - IC FLIP FLOP D-Type POS-EDG DUAL 14TSSOP
CY28346ZI-2

Price: 6.5-8 USD

CYPRESS - Clock Synthesizer with Differential CPU Outputs
PI5V330QEX

Price: 0.284-0.286 USD

PI5V330QEX Pericom Multiplexer Switch ICs
BSM300GA120DN2

Price: 1-2 USD

IGBT power module, Single switch, 1200 V, Collector-emitter voltage, 430A
SVA150XG04TB

Price: 1-2 USD

a-Si TFT-LCD, NEC, 228.096Hmm, 560V
PC354N1

Price: 0.124-0.2 USD

PC354N1T - Mini-flat Package, AC Input Type Photocoupler - Sharp Electrionic Components
RL1210JR-070R22L

Price: 0.177-0.178 USD

RL1210JR51-XX-BL - Thick Film Chip Resistor Low Ohmic - TAITRON Components Incorporated
STPS140A

Price: 0.053-0.055 USD

STPS140A - POWER SCHOTTKY RECTIFIER - STMicroelectronics
STA013

Price: 1.45-1.5 USD

STA013 - MPEG 2.5 LAYER III AUDIO DECODER - STMicroelectronics
SMBJ5347B

Price: 0.073-0.075 USD

SMBJ5347B - 5 Watt Surface Mount Silicon Zener Diodes - Micro Commercial Components