Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
Providing over-current protection for each of its eight sourcing outputs, the UDN2987A and UDN2987LW drivers are used as an interface between standard low-level logic and relays, motors, sole-noids, LEDs, and incandescent lamps. The device includes thermal shutdown and output transient protection/clamp diodes for use with sustaining voltages to 35 V.
In these drivers, each channel includes a latch to turn OFF that channel if the maximum channel current is exceeded. All channels are disabled if the thermal shutdown is activated. A common FAULT output is used to indicate either chip thermal shutdown or any over-current condition. All outputs are enabled by pulling the common OE/R input high. When OE/R is low, all outputs are inhibited and the eight latches are reset.
Under normal operating conditions, each of eight outputs will source in excess of 100 mA continuously at an ambient temperature of 25°C and a supply of 35 V. The over-current fault circuit will protect the device from short-circuits to ground with supply voltages of up to 35 V.
The inputs are compatible with 5 V and 12 V logic systems-TTL,Schottky TTL, DTL, PMOS, and CMOS. In all cases, the output is switched ON by an active high input level. The UDN2987A is supplied in a 20-pin dual in-line plastic package; the UDN2987LW is supplied in a 20-lead small-outline plastic package.
2987 Maximum Ratings
at TA = +25°C Driver Supply Voltage, VS ............................. 35 V Output Sustaining Voltage, VCE(sus) ............ 35 V Continuous Output Current, IOUT ................................................ -500 mA* FAULT Output Voltage, VCE ........................... 35 V FAULT Output Current, lC ............................ 30 mA Input Voltage, VIN ......................................... 15 V Package Power Dissipation, PD .................................................... See Graph Operating Temperature Range, TA ......................................... -20°C to +85°C Storage Temperature Range, TS ....................................... -55°C to +150°C
2987 Features
350 mA Output Source Current Over-Current Protected Internal Ground Clamp Diodes Output Breakdown Voltage 35 V, Minimum TTL, DTL, PMOS, or CMOS Compatible Inputs Internal Thermal Shutdown Automotive Capable
2987 Connection Diagram
Note that the UDN2987A (DIP) and the UDN2987LW (SOIC) are electrically identical and share a common terminal number assignment.